Lines Matching full:count

1 What:		/sys/bus/counter/devices/counterX/countY/count
5 		Count data of Count Y represented as a string.
11 		Historical capture of the Count Y count data.
17 		Count value ceiling for Count Y. This is the upper limit for the
24 		Count value floor for Count Y. This is the lower limit for the
31 		Count mode for channel Y. The ceiling and floor values for
32 		Count Y are used by the count mode where required. The following
33 		count modes are available:
41 			the Count Y ceiling value, while the lower limit is set
42 			to the Count Y floor value. The counter freezes at
43 			count = ceiling when counting up, and at count = floor
45 			counting is resumed only when the count direction is
51 			new count value is loaded to the counter via a preset
55 			A count value boundary is set between the Count Y floor
56 			value and the Count Y ceiling value. The counter is
57 			reset to the Count Y floor value at count = ceiling when
58 			counting up, while the counter is set to the Count Y
59 			ceiling value at count = floor when counting down; the
71 		Discrete set of available values for the respective Count Y
79 		Read-only attribute that indicates the count direction of Count
80 		Y. Two count directions are available: forward and backward.
86 		This attribute exposes such count directions.
96 		for Count Y. Suppose a counter device is used to count the total
113 		Count function mode of Count Y; count function evaluation is
114 		triggered by conditions specified by the Count Y signalZ_action
115 		attributes. The following count functions are available:
118 			Accumulated count is incremented.
121 			Accumulated count is decremented.
124 			Rising edges on signal A updates the respective count.
129 			signal A updates the respective count; if the direction
131 			updates the respective count. Quadrature encoding
136 			signal B updates the respective count; if the direction
138 			updates the respective count. Quadrature encoding
143 			the respective count. Quadrature encoding determines the
148 			the respective count. Quadrature encoding determines the
153 			updates	the respective count. Quadrature encoding
161 		Count Y. If possible, this should match the name of the
168 		Configure the prescaler value associated with Count Y.
178 		used to load counter channels to a set count upon device-defined
179 		preset operation trigger events -- the preset count for channel
193 		Action mode of Count Y for Signal Z. This attribute indicates
194 		the condition of Signal Z that triggers the count function
195 		evaluation for Count Y. The following action modes are
199 			Signal does not trigger the count function. In
200 			Pulse-Direction count function mode, this Signal is
216 		This attribute indicates the number of overflows of count Y.