Lines Matching +full:out +full:- +full:of +full:- +full:band

7  * Copyright 2008-2011	Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
15  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
18  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
19  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
20  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
40  * regulatory_hint_indoor - hint operation in indoor env. or not
48  * regulatory_netlink_notify - notify on released netlink socket
69  * regulatory_hint_found_beacon - hints a beacon was found on a channel
77  * world roaming -- when we do not know our current location. This is
78  * only useful on channels 12, 13 and 14 on the 2 GHz band as channels
79  * 1-11 are already enabled by the world regulatory domain; and on
80  * non-radar 5 GHz channels.
83  * on a newly found BSS. If you cannot make use of this feature you can
84  * set the wiphy->disable_beacon_hints to true.
91  * regulatory_hint_country_ie - hints a country IE as a regulatory domain
94  * @band: the band on which the country IE was received on. This determines
95  *	the band we'll process the country IE channel triplets for.
97  * @country_ie_len: length of the country IE
104  * band it is on. It is technically possible for APs to send channel
105  * country IE triplets even for channels outside of the band they are
109  * information for a band the BSS is not present in it will be ignored.
112 			 enum nl80211_band band,
117  * regulatory_hint_disconnect - informs all devices have been disconneted
135  * cfg80211_get_unii - get the U-NII band for the frequency
136  * @freq: the frequency for which we want to get the UNII band.
138  * Get a value specifying the U-NII band frequency belongs to.
139  * U-NII bands are defined by the FCC in C.F.R 47 part 15.
141  * Returns -EINVAL if freq is invalid, 0 for UNII-1, 1 for UNII-2A,
142  * 2 for UNII-2B, 3 for UNII-2C and 4 for UNII-3.
147  * regulatory_indoor_allowed - is indoor operation allowed
152  * Grace period to timeout pre-CAC results on the dfs channels. This timeout
153  * value is used for Non-ETSI domain.
159  * regulatory_propagate_dfs_state - Propagate DFS channel state to other wiphys
160  * @wiphy - wiphy on which radar is detected and the event will be propagated
162  * @chandef - Channel definition of radar detected channel
163  * @dfs_state - DFS channel state to be set
164  * @event - Type of radar event which triggered this DFS state change
174  * reg_dfs_domain_same - Checks if both wiphy have same DFS domain configured
175  * @wiphy1 - wiphy it's dfs_region to be checked against that of wiphy2
176  * @wiphy2 - wiphy it's dfs_region to be checked against that of wiphy1
181  * reg_reload_regdb - reload the regulatory.db firmware file