Lines Matching refs:Data
594 __u16 Data; in mos7840_interrupt_callback() local
660 rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); in mos7840_interrupt_callback()
843 __u16 Data; in mos7840_open() local
896 Data = 0x0; in mos7840_open()
897 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); in mos7840_open()
902 Data |= 0x80; in mos7840_open()
903 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); in mos7840_open()
909 Data &= ~0x80; in mos7840_open()
910 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); in mos7840_open()
917 Data = 0x0; in mos7840_open()
919 &Data); in mos7840_open()
924 Data |= 0x08; /* Driver done bit */ in mos7840_open()
925 Data |= 0x20; /* rx_disable */ in mos7840_open()
927 mos7840_port->ControlRegOffset, Data); in mos7840_open()
937 Data = 0x00; in mos7840_open()
938 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); in mos7840_open()
944 Data = 0x00; in mos7840_open()
945 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); in mos7840_open()
951 Data = 0xcf; in mos7840_open()
952 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); in mos7840_open()
958 Data = 0x03; in mos7840_open()
959 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_open()
960 mos7840_port->shadowLCR = Data; in mos7840_open()
962 Data = 0x0b; in mos7840_open()
963 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); in mos7840_open()
964 mos7840_port->shadowMCR = Data; in mos7840_open()
966 Data = 0x00; in mos7840_open()
967 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); in mos7840_open()
968 mos7840_port->shadowLCR = Data; in mos7840_open()
970 Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ in mos7840_open()
971 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_open()
973 Data = 0x0c; in mos7840_open()
974 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); in mos7840_open()
976 Data = 0x0; in mos7840_open()
977 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); in mos7840_open()
979 Data = 0x00; in mos7840_open()
980 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); in mos7840_open()
982 Data = Data & ~SERIAL_LCR_DLAB; in mos7840_open()
983 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_open()
984 mos7840_port->shadowLCR = Data; in mos7840_open()
987 Data = 0x0; in mos7840_open()
988 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); in mos7840_open()
990 Data = Data | 0x0c; in mos7840_open()
991 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); in mos7840_open()
993 Data = Data & ~0x0c; in mos7840_open()
994 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); in mos7840_open()
996 Data = 0x0c; in mos7840_open()
997 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); in mos7840_open()
1000 Data = 0x0; in mos7840_open()
1002 &Data); in mos7840_open()
1003 Data = Data & ~0x20; in mos7840_open()
1005 Data); in mos7840_open()
1008 Data = 0x0; in mos7840_open()
1010 &Data); in mos7840_open()
1011 Data = Data | 0x10; in mos7840_open()
1013 Data); in mos7840_open()
1154 __u16 Data; in mos7840_close() local
1192 Data = 0x0; in mos7840_close()
1193 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); in mos7840_close()
1195 Data = 0x00; in mos7840_close()
1196 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); in mos7840_close()
1583 __u16 Data; in mos7840_send_cmd_write_baud_rate() local
1603 Data = 0x2b; in mos7840_send_cmd_write_baud_rate()
1604 mos7840_port->shadowMCR = Data; in mos7840_send_cmd_write_baud_rate()
1606 Data); in mos7840_send_cmd_write_baud_rate()
1616 Data = 0xb; in mos7840_send_cmd_write_baud_rate()
1617 mos7840_port->shadowMCR = Data; in mos7840_send_cmd_write_baud_rate()
1619 Data); in mos7840_send_cmd_write_baud_rate()
1630 Data = 0x0; in mos7840_send_cmd_write_baud_rate()
1634 &Data); in mos7840_send_cmd_write_baud_rate()
1639 Data = (Data & 0x8f) | clk_sel_val; in mos7840_send_cmd_write_baud_rate()
1641 Data); in mos7840_send_cmd_write_baud_rate()
1653 Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; in mos7840_send_cmd_write_baud_rate()
1654 mos7840_port->shadowLCR = Data; in mos7840_send_cmd_write_baud_rate()
1655 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_send_cmd_write_baud_rate()
1658 Data = (unsigned char)(divisor & 0xff); in mos7840_send_cmd_write_baud_rate()
1659 dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); in mos7840_send_cmd_write_baud_rate()
1660 mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); in mos7840_send_cmd_write_baud_rate()
1662 Data = (unsigned char)((divisor & 0xff00) >> 8); in mos7840_send_cmd_write_baud_rate()
1663 dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); in mos7840_send_cmd_write_baud_rate()
1664 mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); in mos7840_send_cmd_write_baud_rate()
1667 Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; in mos7840_send_cmd_write_baud_rate()
1668 mos7840_port->shadowLCR = Data; in mos7840_send_cmd_write_baud_rate()
1669 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_send_cmd_write_baud_rate()
1690 __u16 Data; in mos7840_change_port_settings() local
1769 Data = 0x00; in mos7840_change_port_settings()
1770 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); in mos7840_change_port_settings()
1772 Data = 0x00; in mos7840_change_port_settings()
1773 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1775 Data = 0xcf; in mos7840_change_port_settings()
1776 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1779 Data = mos7840_port->shadowLCR; in mos7840_change_port_settings()
1781 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1783 Data = 0x00b; in mos7840_change_port_settings()
1784 mos7840_port->shadowMCR = Data; in mos7840_change_port_settings()
1785 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1786 Data = 0x00b; in mos7840_change_port_settings()
1787 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1800 Data = mos7840_port->shadowMCR; in mos7840_change_port_settings()
1801 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); in mos7840_change_port_settings()
1816 Data = 0x0c; in mos7840_change_port_settings()
1817 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); in mos7840_change_port_settings()
2089 __u16 Data; in mos7840_port_probe() local
2136 mos7840_port->ControlRegOffset, &Data); in mos7840_port_probe()
2141 dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); in mos7840_port_probe()
2142 Data |= 0x08; /* setting driver done bit */ in mos7840_port_probe()
2143 Data |= 0x04; /* sp1_bit to have cts change reflect in in mos7840_port_probe()
2148 mos7840_port->ControlRegOffset, Data); in mos7840_port_probe()
2157 Data = 0x01; in mos7840_port_probe()
2159 (__u16) (mos7840_port->DcrRegOffset + 0), Data); in mos7840_port_probe()
2166 Data = 0x05; in mos7840_port_probe()
2168 (__u16) (mos7840_port->DcrRegOffset + 1), Data); in mos7840_port_probe()
2175 Data = 0x24; in mos7840_port_probe()
2177 (__u16) (mos7840_port->DcrRegOffset + 2), Data); in mos7840_port_probe()
2185 Data = 0x0; in mos7840_port_probe()
2186 status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); in mos7840_port_probe()
2193 Data = 0x20; in mos7840_port_probe()
2194 status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); in mos7840_port_probe()
2202 Data = 0x00; in mos7840_port_probe()
2203 status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); in mos7840_port_probe()
2212 Data = 0xff; in mos7840_port_probe()
2215 ((__u16)mos7840_port->port_num)), Data); in mos7840_port_probe()
2224 Data = 0xff; in mos7840_port_probe()
2227 ((__u16)mos7840_port->port_num) - 0x1), Data); in mos7840_port_probe()
2275 Data = 0x0f; in mos7840_port_probe()
2276 status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); in mos7840_port_probe()