Lines Matching refs:USB
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
12 host/peripheral/OTG USB controllers.
21 tristate "xHCI HCD (USB 3.0) support"
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
101 tristate "EHCI HCD (USB 2.0) support"
104 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
106 If your USB host controller supports USB 2.0, you will likely want to
110 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
113 probably configure the OHCI (for NEC and some other vendors) USB Host
141 (TT) in USB 2.0 hubs. Without this, only one transfer will be
146 highspeed USB hub which is connected to a highspeed USB Host
162 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
167 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
176 Xilinx xps USB host controller core is EHCI compliant and has
182 tristate "Support for Freescale on-chip EHCI USB controller"
185 Variation of ARC USB block used in some Freescale chips.
188 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
192 Variation of ARC USB block used in some Freescale chips.
195 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
212 tristate "Support for Marvell EBU on-chip EHCI USB controller"
220 Marvell PXA/MMP USB controller" for those.
223 tristate "Support for ST SPEAr on-chip EHCI USB controller"
231 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
240 tristate "Support for Atmel on-chip EHCI USB controller"
253 This driver enables support for the internal USB Host Controllers
257 bool "EHCI support for PPC USB controller on OF platform bus"
261 Enables support for the USB controller present on the PowerPC
265 bool "EHCI support for SuperH USB controller"
278 tristate "EHCI support for Marvell PXA/MMP USB controller"
283 USB SPH and OTG controller. SPH is a single port host, and it can
288 on-chip EHCI USB controller" for those.
299 It is needed for high-speed (480Mbit/sec) USB 2.0 device
321 USB 2.0 device support. All CN6XXX based chips with USB are
330 The OXU210HP is an USB host/OTG/device controller. Enable this
334 implement OTG nor USB device controllers.
343 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
365 depends on USB && HAS_DMA && HAS_IOMEM
375 tristate "MAX3421 HCD (USB-over-SPI) support"
376 depends on USB && SPI
378 The Maxim MAX3421E chip supports standard USB 2.0-compliant
386 tristate "OHCI HCD (USB 1.1) support"
390 USB 1.1 host controller hardware. It does more in hardware than Intel's
391 UHCI specification. If your USB host controller follows the OHCI spec,
393 USB controller from Intel or VIA, this is appropriate. If your host
396 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
412 tristate "Support for ST SPEAr on-chip OHCI USB controller"
420 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
437 tristate "Support for LPC on-chip OHCI USB controller"
447 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
455 tristate "Support for Atmel on-chip OHCI USB controller"
491 Enables support for big-endian USB controllers present on the
499 Enables support for little-endian USB controllers present on the
508 tristate "OHCI support for PCI-bus USB controllers"
513 Enables support for PCI-bus plug-in USB controller cards.
526 Broadcom USB OHCI core.
534 bool "OHCI support for SuperH USB controller (DEPRECATED)"
559 It is needed for low-speed USB 1.0 device support.
581 controller. It is needed for low-speed USB 1.0 device
582 support. All CN6XXX based chips with USB are supported.
591 accessing the USB hardware in the PC (which is also called the USB
592 host controller). If your USB host controller conforms to this
616 tristate "Freescale QE USB Host Controller support"
621 This driver enables support for Freescale QE USB Host Controller
623 Full and Low Speed USB.
626 bool "Freescale QE USB Host Controller debug support"
636 The U132 adapter is a USB to CardBus adapter specifically designed
646 USB client driver that interfaces to the FTDI chip within ELAN's
647 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
651 This driver has been tested with a CardBus OHCI USB adapter, and
652 worked with a USB PEN Drive inserted into the first USB port of
663 The SL811HS is a single-port USB controller that supports either
695 The R8A66597 is a USB 2.0 host and peripheral controller.
707 The Renesas USBHS is a USB 2.0 host and peripheral controller.
719 This driver enables support for the on-chip USB host in the
758 or embedded hosts that need to undergo USB-IF compliance testing with
763 their USB hardware designs. It is not needed for normal use. If