163 #define serial_outp(up, offset, value)	serial_out(up, offset, value)  macro
203 		serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);  in __enable_rsa()
223 			serial_outp(up, UART_RSA_FRR, 0);  in enable_rsa()
246 			serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);  in disable_rsa()
406 		serial_outp(up, UART_TX, up->port.x_char);  in transmit_chars()
629 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
630 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
631 		serial_outp(up, UART_IER, 0);  in sunsu_startup()
632 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
634 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
635 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
636 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
652 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_startup()
653 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_startup()
655 		serial_outp(up, UART_FCR, 0);  in sunsu_startup()
692 	serial_outp(up, UART_LCR, UART_LCR_WLEN8);  in sunsu_startup()
707 	serial_outp(up, UART_IER, up->ier);  in sunsu_startup()
740 	serial_outp(up, UART_IER, 0);  in sunsu_shutdown()
757 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_shutdown()
760 	serial_outp(up, UART_FCR, 0);  in sunsu_shutdown()
884 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_change_speed()
885 		serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);  in sunsu_change_speed()
887 	serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */  in sunsu_change_speed()
888 	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */  in sunsu_change_speed()
889 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */  in sunsu_change_speed()
891 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
892 	serial_outp(up, UART_LCR, cval);		/* reset DLAB */  in sunsu_change_speed()
897 			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_change_speed()
899 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
1064 		serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()
1069 		serial_outp(up, UART_IER, 0x0f);  in sunsu_autoconfig()
1074 		serial_outp(up, UART_IER, scratch);  in sunsu_autoconfig()
1092 		serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);  in sunsu_autoconfig()
1094 		serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1098 	serial_outp(up, UART_LCR, 0xBF);	/* set up for StarTech test */  in sunsu_autoconfig()
1099 	serial_outp(up, UART_EFR, 0);		/* EFR is the same as FCR */  in sunsu_autoconfig()
1100 	serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1101 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1119 		serial_outp(up, UART_LCR, UART_LCR_DLAB);  in sunsu_autoconfig()
1123 			serial_outp(up, UART_LCR, 0xBF);  in sunsu_autoconfig()
1130 		serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);  in sunsu_autoconfig()
1131 		serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1141  			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1142 			serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1143 			serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1149 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1151 	serial_outp(up, UART_LCR, save_lcr);  in sunsu_autoconfig()
1154 		serial_outp(up, UART_SCR, 0xa5);  in sunsu_autoconfig()
1156 		serial_outp(up, UART_SCR, 0x5a);  in sunsu_autoconfig()
1158 		serial_outp(up, UART_SCR, scratch);  in sunsu_autoconfig()
1175 		serial_outp(up, UART_RSA_FRR, 0);  in sunsu_autoconfig()
1177 	serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1178 	serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |  in sunsu_autoconfig()
1181 	serial_outp(up, UART_FCR, 0);  in sunsu_autoconfig()
1183 	serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()