103 	struct geni_se se;  member
205 	port->se.base = uport->membase;  in qcom_geni_serial_request_port()
443 		geni_se_cancel_m_cmd(&port->se);  in qcom_geni_serial_console_write()
446 			geni_se_abort_m_cmd(&port->se);  in qcom_geni_serial_console_write()
581 	geni_se_cancel_m_cmd(&port->se);  in qcom_geni_serial_stop_tx()
584 		geni_se_abort_m_cmd(&port->se);  in qcom_geni_serial_stop_tx()
602 	geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);  in qcom_geni_serial_start_rx()
633 	geni_se_cancel_s_cmd(&port->se);  in qcom_geni_serial_stop_rx()
817 	port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);  in get_tx_fifo_size()
818 	port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se);  in get_tx_fifo_size()
819 	port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);  in get_tx_fifo_size()
854 	proto = geni_se_read_proto(&port->se);  in qcom_geni_serial_port_setup()
871 	geni_se_config_packing(&port->se, BITS_PER_BYTE, port->tx_bytes_pw,  in qcom_geni_serial_port_setup()
873 	geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw,  in qcom_geni_serial_port_setup()
875 	geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);  in qcom_geni_serial_port_setup()
876 	geni_se_select_mode(&port->se, GENI_SE_FIFO);  in qcom_geni_serial_port_setup()
962 	ver = geni_se_get_qup_hw_version(&port->se);  in qcom_geni_serial_set_termios()
971 	clk_set_rate(port->se.clk, clk_rate);  in qcom_geni_serial_set_termios()
1110 	struct geni_se se;  in qcom_geni_serial_earlycon_setup()  local
1115 	memset(&se, 0, sizeof(se));  in qcom_geni_serial_earlycon_setup()
1116 	se.base = uport->membase;  in qcom_geni_serial_earlycon_setup()
1117 	if (geni_se_read_proto(&se) != GENI_SE_UART)  in qcom_geni_serial_earlycon_setup()
1132 	geni_se_config_packing(&se, BITS_PER_BYTE, 1, false, true, false);  in qcom_geni_serial_earlycon_setup()
1133 	geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2);  in qcom_geni_serial_earlycon_setup()
1134 	geni_se_select_mode(&se, GENI_SE_FIFO);  in qcom_geni_serial_earlycon_setup()
1206 		geni_se_resources_on(&port->se);  in qcom_geni_serial_pm()
1209 		geni_se_resources_off(&port->se);  in qcom_geni_serial_pm()
1282 	port->se.dev = &pdev->dev;  in qcom_geni_serial_probe()
1283 	port->se.wrapper = dev_get_drvdata(pdev->dev.parent);  in qcom_geni_serial_probe()
1284 	port->se.clk = devm_clk_get(&pdev->dev, "se");  in qcom_geni_serial_probe()
1285 	if (IS_ERR(port->se.clk)) {  in qcom_geni_serial_probe()
1286 		ret = PTR_ERR(port->se.clk);  in qcom_geni_serial_probe()