Lines Matching full:if
19 Generic RTC class support. If you say yes here, you will
23 if RTC_CLASS
29 If you say yes here, the system time (wall clock) will be set using
51 If the clock you specify here is not battery backed, it may still
60 If you say yes here, the system time (wall clock) will be stored
62 minutes if userspace reports synchronized NTP status.
67 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
96 Say yes here if you want to use your RTCs using sysfs interfaces,
99 If unsure, say Y.
106 Say yes here if you want to use your system clock RTC through
109 If there is no RTC for the system clock, then the first RTC(rtc0)
112 If unsure, say Y.
118 Say yes here if you want to use your RTCs using the /dev
127 If unsure, say Y.
133 Provides an emulation for RTC_UIE if the underlying rtc chip
139 only if you know that you really need it.
144 If you say yes here you get support for the
148 You want this driver only if you are doing development
152 This driver can also be built as a module. If so, the module
157 if I2C
163 If you say yes here you get support for RTC function in Marvell
166 This driver can also be built as a module. If so, the module
173 If you say yes here you get support for RTC function in Marvell
176 This driver can also be built as a module. If so, the module
183 If you say yes here you get support for the Abracon
186 This driver can also be built as a module. If so, the module
193 If you say yes here you get support for the Abracon
196 This driver can also be built as a module. If so, the module
201 select WATCHDOG_CORE if WATCHDOG
203 If you say yes here you get support for Abracon AB080X and AB180X
207 This driver can also be built as a module. If so, the module
214 If you say yes here you get support for the real-time clock found
217 This driver can also be built as a module. If so, the module
225 If you say yes here you get support for the wake-timer found on
228 This driver can also be built as a module. If so, the module will
235 If you say yes here you get support for the RTC of ams AS3722 PMIC
238 This driver can also be built as a module. If so, the module
244 If you say yes here you get support for various compatible RTC
256 This driver can also be built as a module. If so, the module
267 Setting this option will add proper support for the century bit but if
276 If you say yes here you get support for Dallas Semiconductor
277 DS1374 real-time clock chips. If an interrupt is associated
280 This driver can also be built as a module. If so, the module
287 If you say Y here you will get support for the
294 If you say yes here you get support for the
297 This driver can also be built as a module. If so, the module
308 This driver can also be built as a module. If so, the module
320 If you say yes here you will get support for the
323 This driver can also be built as a module. If so, the module
330 If you say yes here you will get support for the
333 This driver can also be built as a module. If so, the module
340 If you say yes here you will get support for the
343 This driver can also be built as a module. If so, the module
350 If you say yes here you will get support for the
353 This driver can also be built as a module. If so, the module
360 If you say yes here you will get support for the
363 This driver can also be built as a module. If so, the module
370 If you say yes here you will get support for the
373 This driver can also be built as a module. If so, the module
379 default m if ARCH_MESON
381 If you say yes here you will get support for the
384 This driver can also be built as a module. If so, the module
391 If you say yes here you will get support for the
394 This driver can also be built as a module. If so, the module
400 If you say yes here you get support for the
403 This driver can also be built as a module. If so, the module
409 If you say yes here you get support for the
412 This driver can also be built as a module. If so, the module
418 If you say yes here you get support for the
421 This driver can also be built as a module. If so, the module
428 If you say yes here you get support for the
431 This driver can also be built as a module. If so, the module
437 If you say yes here you get support for the
440 This driver can also be built as a module. If so, the module
446 If you say yes here you get support for the NXP PCF8523 RTC
449 This driver can also be built as a module. If so, the module
456 If you say yes here you get support for the PCF85063 RTC chip
458 This driver can also be built as a module. If so, the module
465 If you say yes here you get support for the PCF85363 RTC chip.
467 This driver can also be built as a module. If so, the module
476 If you say yes here you get support for the
480 This driver can also be built as a module. If so, the module
486 If you say yes here you get support for the Philips PCF8583
492 This driver can also be built as a module. If so, the module
498 If you say Y here you will get support for the ST M41T60
503 This driver can also be built as a module. If so, the module
510 If you say Y here you will get support for the
516 If you say Y here you will get support for the RTC
519 This driver can also be built as a module. If so, the module
525 If you say Y here you will get support for the TI
528 This driver can also be built as a module. If so, the module
541 If you say yes here you get support for the RTC on the
551 If you say yes here you get support for the RTC on the
554 This driver can also be built as a module. If so, the module
561 If you say yes here you get support for the RTC of TI PALMA series PMIC
564 This driver can also be built as a module. If so, the module
579 If you say yes here you get support for the RTC on the
582 This driver can also be built as a module. If so, the module
597 If you say yes here you get support for the RTC on the
600 This driver can also be built as a module. If so, the module
607 If you say yes here you will get support for the Seiko
610 This driver can also be built as a module. If so the module
616 If you say Y here you will get support for the
621 This driver can also be built as a module. If so the module
627 If you say yes here you get support for the Epson RX8010SJ RTC
630 This driver can also be built as a module. If so, the module
636 If you say yes here you will get support for the Epson RX-8571/
639 This driver can also be built as a module. If so the module
645 If you say yes here you get support for the Epson
648 This driver can also be built as a module. If so, the module
654 If you say yes here you get support for the EM
657 This driver can also be built as a module. If so, the module
663 If you say yes here you get support for the Micro Crystal
666 This driver can also be built as a module. If so, the module
672 If you say yes here you get support for the Micro Crystal RV8803 and
675 This driver can also be built as a module. If so, the module
683 If you say yes here you will get support for the
686 This driver can also be built as a module. If so, the module
692 If you say yes here you get support for the ZXW Shenzhen whwave
695 This driver can also be built as a module. If so, the module
702 if SPI_MASTER
707 If you say yes here you will get support for the
710 This driver can also be built as a module. If so, the module
716 If you say yes here you will get support for the
719 This driver can also be built as a module. If so, the module
726 If you say yes here you get support for the Dallas DS1302 RTC chips.
728 This driver can also be built as a module. If so, the module
738 This driver can also be built as a module. If so, the module
745 If you say yes here you get support for the
749 This driver can also be built as a module. If so, the module
756 If you say yes here you get support for the
762 This driver can also be built as a module. If so, the module
768 If you say yes here you get support for the
774 This driver can also be built as a module. If so, the module
780 If you say yes here you will get support for the
786 This driver can also be built as a module. If so, the module
792 If you say yes here you will get support for the
795 This driver can also be built as a module. If so, the module
801 If you say yes here you will get support for the Epson RX-4581.
803 This driver can also be built as a module. If so the module
810 If you say yes here you will get support for the Epson RX-6610.
812 This driver can also be built as a module. If so the module
818 If you say yes here you get support for the
821 This driver can also be built as a module. If so, the module
827 If you say yes here you will get support for the
830 This driver can also be built as a module. If so, the module
837 If you say yes here you get support for the NXP PCF2123
840 This driver can also be built as a module. If so, the module
846 If you say yes here you will get support for the Microchip MCP795.
848 This driver can also be built as a module. If so the module
859 default m if I2C=m
860 default y if I2C=y
861 default y if SPI_MASTER=y
862 select REGMAP_I2C if I2C
863 select REGMAP_SPI if SPI_MASTER
871 If you say yes here you get support for Dallas Semiconductor
872 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
875 This driver can also be built as a module. If so, the module
883 Say Y here if you want to expose temperature sensor data on
889 select WATCHDOG_CORE if WATCHDOG
891 If you say yes here you get support for the NXP PCF2127/29 RTC
899 This driver can also be built as a module. If so, the module
906 If you say yes here you get support for the Micro Crystal
909 This driver can also be built as a module. If so, the module
918 Say Y here if you want to expose temperature sensor data on
930 default y if X86
941 you can safely enable this driver if you don't know whether
944 This driver can also be built as a module. If so, the module
954 system, specifically MC146818 compatibles. If in doubt, say Y.
959 default y if X86_INTEL_MID
972 If you say yes here you get support for the Dallas DS1216 RTC chips.
978 If you say yes here you get support for the Dallas DS1286 RTC chips.
984 If you say yes here you get support for the
987 This driver can also be built as a module. If so, the module
994 If you say yes here you get support for the
997 This driver can also be built as a module. If so, the module
1003 If you say yes here you get support for the Dallas/Maxim DS1685
1008 This driver can also be built as a module. If so, the module
1071 If you say yes here you get support for the
1074 This driver can also be built as a module. If so, the module
1080 If you say yes here you get support for the
1083 This driver can also be built as a module. If so, the module
1097 If you say yes here you will get support for the
1100 This driver can also be built as a module. If so, the module
1107 If you say yes here you will get support for the RTC subsystem
1110 This driver can also be built as a module. If so, the module
1117 If you say yes here you will get support for the EFI
1120 This driver can also be built as a module. If so, the module
1127 If you say yes here you get support for the
1130 This driver can also be built as a module. If so, the module
1136 If you say Y here you will get support for the
1139 This driver can also be built as a module. If so, the module
1146 If you say Y here you will get support for the
1149 This driver can also be built as a module, if so, the module
1156 If you say Y here you will get support for the
1162 This driver can also be built as a module, if so, the module
1169 If you say yes here you get support for the Oki MSM6242
1172 This driver can also be built as a module. If so, the module
1179 If you say Y here you will get support for the TI
1182 This driver can also be built as a module. If so, the module
1189 If you say yes here you get support for the Ricoh RP5C01
1193 This driver can also be built as a module. If so, the module
1199 If you say yes here you will get support for the
1202 This driver can also be built as a module. If so, the module
1209 If you say yes here you will get support for the RTC subsystem
1212 This driver can also be built as a module. If so, the module
1219 If you say yes here you will get support for the RTC subsystem
1222 This driver can also be built as a module. If so, the module
1229 If you say Y here you will get support for the RTC subsystem
1233 This driver can also be built as a module. If so, the module
1241 If you say Y here you will get support for the RTC found on
1248 If you say yes here you get support for the RTC subsystem of the
1254 default y if AB3100_CORE
1273 If you say yes here you get support for the PowerNV platform RTC
1276 This driver can also be built as a module. If so, the module
1283 If you say yes here you get support for the RTC controller found on
1290 If you say yes here you will get support for the
1293 This driver can also be built as a module. If so, the module
1302 If you say yes here you get support for the RTC on the
1305 This driver can also be built as a module. If so, the module
1312 If you say yes here you get support for the RTC on the
1315 This driver can also be built as a module. If so, the module
1322 If you say yes here you get support for the RTC on Conexant
1325 This driver can also be built as a module. If so, the module
1334 This driver can also be built as a module, if so, the module
1349 This driver can also be built as a module, if so, the module
1360 This driver can also be built as a module, if so, the module
1373 This driver can also be built as a module, if so, module
1379 This will include RTC support for Samsung SoCs. If
1396 This driver can also be build as a module. If so, the module
1403 If you say yes here you get support for the
1406 This driver can also be built as a module. If so, the module
1413 If you say Y here you will get access to the real time clock
1433 If you say Y here you will get access to the real time clock
1443 If you say Y here you will get access to ARM AMBA
1453 If you say Y here you will get access to ARM AMBA
1489 This driver can also be built as a module. If so, the module
1496 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1505 RTC abstraction. If you do not know what you are doing, you should
1513 If you say Y here you will get access to the real time clock
1524 If you say Y here you will get access to the real time clock
1532 If you say Y here you will get support for the Hypervisor
1541 If you say Y here you will get support for the RTC found in
1548 If you say Y here you will get support for the RTC found on
1555 If you say Y here you will get support for the RTC found on
1569 If you say yes here you will get support for the in-chip RTC
1573 This driver can also be built as a module. If so, the module
1580 If you say yes here you will get support for the in-chip RTC
1583 This driver can also be built as a module. If so, the module
1590 If you say Y here you will get access to Cadence RTC IP
1601 If you say Y here you will get support for the
1604 This driver can also be built as a module. If so, the module
1611 If you say yes here you will get support for the RTC on PS3.
1613 This driver can also be built as a module. If so, the module
1620 If you say Y here you will get access to ST-Ericsson
1624 This driver can also be built as a module. If so, the module
1633 If you say yes here you will get support for the onboard
1636 This driver can also be built as a module. If so, the module
1643 If you say Y here you will get support for the RTC found on
1657 If you say yes here you will get support for the
1660 This driver can also be built as a module. If so, the module
1667 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1670 This driver can also be built as a module. If so, the module
1681 If you have one of the devices above enable this driver to use
1682 the hardware RTC. This driver can also be built as a module. If
1691 This driver can also be built as a module. If so, the module
1698 If you say yes here you get support for the
1708 If you say yes here you get support for the
1711 This drive can also be built as a module. If so, the module
1720 This drive can also be built as a module. If so, the module
1730 This driver can also be built as a module. If so, the module
1737 If you say yes here you get support for the Freescale MXC
1740 This driver can also be built as a module, if so, the module
1747 If you say yes here you get support for the Freescale MXC
1750 This driver can also be built as a module, if so, the module
1759 If you say yes here you get support for the Freescale SNVS
1762 This driver can also be built as a module, if so, the module
1770 If you say yes here you get support for the NXP i.MX System
1795 If you say yes here you get support for the MOXA ART
1798 This driver can also be built as a module. If so, the module
1809 If you want to use MediaTek(R) RTC interface, select Y or M here.
1818 This drive can also be built as a module. If so, the module
1826 If you say yes here you get support for the APM X-Gene SoC real time
1829 This driver can also be built as a module, if so, the module
1837 If you say yes here you get support for the PIC32 RTC module.
1839 This driver can also be built as a module. If so, the module
1847 If you say yes here you get support for the EPSON TOYOCOM
1850 This driver can also be built as a module. If so, the module
1858 If you say yes here you get support for the STM32 On-Chip
1861 This driver can also be built as a module, if so, the module
1876 If you say yes here, you get support for the RTD1295 SoC
1884 If you say yes here you get support for the ASPEED BMC SoC real time
1887 This driver can also be built as a module, if so, the module
1901 If this driver is compiled as a module, it will be named
1919 If you say yes here, you get read/write support for the Real Time
1922 This can also be built as a module. If so, the module will