432 struct brcmf_sdio {  struct
433 	struct brcmf_sdio_dev *sdiodev;	/* sdio device handler */  argument
452 	struct brcmf_sdio_hdrinfo cur_read;  argument
454 	bool rxskip;		/* Skip receive (awaiting NAK ACK) */
455 	bool rxpending;		/* Data frame pending in dongle */
457 	uint rxbound;		/* Rx frames to read before resched */
458 	uint txbound;		/* Tx frames to send before resched */
459 	uint txminmax;
461 	struct sk_buff *glomd;	/* Packet containing glomming descriptor */
462 	struct sk_buff_head glom; /* Packet list for glommed superframe */
464 	u8 *rxbuf;		/* Buffer for receiving control packets */
465 	uint rxblen;		/* Allocated length of rxbuf */
466 	u8 *rxctl;		/* Aligned pointer into rxbuf */
467 	u8 *rxctl_orig;		/* pointer for freeing rxctl */
468 	uint rxlen;		/* Length of valid data in buffer */
469 	spinlock_t rxctl_lock;	/* protection lock for ctrl frame resources */
471 	u8 sdpcm_ver;	/* Bus protocol reported by dongle */
473 	bool intr;		/* Use interrupts */
474 	bool poll;		/* Use polling */
475 	atomic_t ipend;		/* Device interrupt is pending */
476 	uint spurious;		/* Count of spurious interrupts */
477 	uint pollrate;		/* Ticks between device polls */
478 	uint polltick;		/* Tick counter */
481 	uint console_interval;
482 	struct brcmf_console console;	/* Console output polling support */
483 	uint console_addr;	/* Console address from shared struct */
486 	uint clkstate;		/* State of sd and backplane clock(s) */
487 	s32 idletime;		/* Control for activity timeout */
488 	s32 idlecount;		/* Activity timeout counter */
489 	s32 idleclock;		/* How to set bus driver when idle */
490 	bool rxflow_mode;	/* Rx flow control mode */
514 	struct brcmf_sdio_count sdcnt;  argument
515 	bool sr_enabled; /* SaveRestore enabled */
516 	bool sleeping;
518 	u8 tx_hdrlen;		/* sdio bus header length for tx packet */
519 	bool txglom;		/* host tx glomming enable flag */
520 	u16 head_align;		/* buffer pointer alignment */
521 	u16 sgentry_align;	/* scatter-gather buffer alignment */