Lines Matching full:this
12 This is an option for use by developers; most people should
13 say N here. This enables MMC host driver debugging. And further
21 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
32 This selects the Qualcomm Data Mover lite/local on SD Card controller.
33 This option will enable the dma to work correctly, if you are using
34 Qcom SOCs and MMC, you would probably need this option to get DMA working.
43 This selects the STMicroelectronics STM32 SDMMC host controller.
52 This selects the Intel(R) PXA(R) Multimedia card Interface.
62 This selects the generic Secure Digital Host Controller Interface.
64 and Toshiba(R). Most controllers found in laptops are of this type.
66 If you have a controller with this interface, say Y or M here. You
75 This is silent Kconfig symbol that is selected by the drivers that
83 This option is selected by drivers running on big endian hosts
86 This endian mapping mode is called "data invariance" and
90 This is the case for the Nintendo Wii SDHCI.
99 This selects the PCI Secure Digital Host Controller Interface.
102 If you have a controller with this interface, say Y or M here.
111 This adds a pci quirk to disable Ricoh MMC Controller. This
115 useless. It is safe to select this even if you don't
125 This selects support for ACPI enumerated SDHCI controllers,
129 If you have a controller with this interface, say Y or M here.
137 This selects the common helper functions support for Secure Digital
140 If you have a controller with this interface, say Y or M here.
151 This selects the Arasan Secure Digital Host Controller Interface
152 (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
154 If you have a controller with this interface, say Y or M here.
163 This selects the ASPEED Secure Digital Host Controller Interface.
165 If you have a controller with this interface, say Y or M here. You
175 This selects the Atmel SDMMC driver
184 This selects the Freescale eSDHC controller support.
186 If you have a controller with this interface, say Y or M here.
196 This selects the Secure Digital Host Controller Interface (SDHCI)
200 If you have a controller with this interface, say Y or M here.
210 This selects Synopsys DesignWare Cores Mobile Storage Controller
212 If you have a controller with this interface, say Y or M here.
220 This selects the Cadence SD/SDIO/eMMC driver.
222 If you have a controller with this interface, say Y or M here.
231 This selects the SDHCI support for CNS3xxx System-on-Chip devices.
233 If you have a controller with this interface, say Y or M here.
244 This selects the Freescale eSDHC/uSDHC controller support
247 If you have a controller with this interface, say Y or M here.
257 This selects the Secure Digital Host Controller Interface in
260 If you have a controller with this interface, say Y or M here.
271 This selects the Tegra SD/MMC controller. If you have a Tegra
280 This selects the Secure Digital Host Controller Interface (SDHCI)
284 If you have a controller with this interface, say Y or M here.
294 This selects the SDHCI support for SiRF System-on-Chip devices.
296 If you have a controller with this interface, say Y or M here.
307 This selects the Marvell(R) PXAV3 SD Host Controller.
320 This selects the Marvell(R) PXAV2 SD Host Controller.
331 This selects the Secure Digital Host Controller Interface (SDHCI)
335 If you have a controller with this interface, say Y or M here.
354 This selects the Broadcom Kona Secure Digital Host Controller
356 This is used in Broadcom mobile SoCs.
358 If you have a controller with this interface, say Y or M here.
365 This selects the Secure Digital Host Controller Interface (SDHCI)
367 If you have a controller with this interface, say Y or M here.
379 This selects the iProc SD/MMC controller.
390 This selects support for the Amlogic SD/MMC Host Controller
391 found on the S905/GX*/AXG family of SoCs. This controller is
394 If you have a controller with this interface, say Y here.
402 This selects support for the SD/MMC Host Controller on
405 If you have a controller with this interface, say Y or M here.
412 This selects support for the MOXART SD/MMC Host Controller.
415 If you have a controller with this interface, say Y here.
423 This selects the Secure Digital Host Controller Interface in
426 If you have a controller with this interface, say Y or M here.
434 This selects the TI OMAP Multimedia card Interface.
444 This selects the TI OMAP High Speed Multimedia card Interface.
454 This selects the Winbond(R) W83L51xD Secure digital and
472 This selects the AMD Alchemy(R) Multimedia card interface.
481 This selects the Atmel Multimedia Card Interface driver.
493 This selects the Secure Digital Host Controller Interface (SDHCI)
497 If you have a controller with this interface, say Y or M here.
505 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
515 This selects the Freescale SSP MMC controller found on MXS based
528 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
533 To compile this driver as a module, choose M here: the
541 This selects the Marvell SDIO host driver.
545 To compile this driver as a module, choose M here: the
552 This selects the TI DAVINCI Multimedia card Interface.
560 This selects the Goldfish Multimedia card Interface emulation
570 instead of using a "native" MMC/SD/SDIO controller. This has a
582 This selects a driver for the MCI interface found in
606 move the data. This has been the traditional default for
614 Currently, the DMA support in this driver seems to not be
615 working properly and needs to be debugged before this
627 To compile this driver as a module, choose M here: the
636 This selects the SDIO Host Controller in Spreadtrum
637 SoCs, this driver supports R11(IP version: R11P0).
639 If you have a controller with this interface, say Y or M here.
651 This provides support for the SD/MMC cell found in TC6393XB,
659 This provides support for the SDHI SD/SDIO controller found in
667 This provides DMA support for SDHI SD/SDIO controllers
668 using SYS-DMAC via DMA Engine. This supports the controllers
677 This provides DMA support for SDHI SD/SDIO controllers
678 using on-chip bus mastering. This supports the controllers
679 found in arm64 based SoCs. This controller is also found in
688 This provides support for the SD/eMMC controller found in
689 UniPhier SoCs. The eMMC variant of this controller is used
697 This option enables support for MMC/SD part of ENE CB710/720 Flash
701 This driver can also be built as a module. If so, the module
708 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
710 some motherboards manufactured by VIA. This card reader supports
712 If you have a controller with this interface, say Y or M here.
720 This selects Cavium OCTEON SD/MMC card Interface.
732 This selects Cavium ThunderX SD/MMC Card Interface.
741 This selects support for the Synopsys DesignWare Mobile Storage IP
742 block, this provides host support for SD and MMC interfaces, in both
750 This selects the common helper functions support for Host Controller
751 Interface based platform driver. Please select this option if the IP
752 is present as a platform device. This is the common interface for the
755 If you have a controller with this interface, say Y or M here.
764 This selects support for Mellanox BlueField SoC specific extensions to
765 the Synopsys DesignWare Memory Card Interface driver. Select this
773 This selects support for Samsung Exynos SoC specific extensions to the
774 Synopsys DesignWare Memory Card Interface driver. Select this option
782 This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
783 Synopsys DesignWare Memory Card Interface driver. Select this option
791 This selects support for Hisilicon K3 SoC specific extensions to the
792 Synopsys DesignWare Memory Card Interface driver. Select this option
799 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
800 Select this option if the IP is present on PCI platform.
802 If you have a controller with this interface, say Y or M here.
811 This selects support for Rockchip SoC specific extensions to the
812 Synopsys DesignWare Memory Card Interface driver. Select this option
820 This selects support for ZTE SoC specific extensions to the
821 Synopsys DesignWare Memory Card Interface driver. Select this option
828 This selects the MMC Host Interface controller (MMCIF) found in various
836 This selects support for the SD/MMC controller on Ingenic
846 This selects support for Elan Digital Systems' VUB300 chip.
866 To compile this mmc host controller driver as a module,
877 This selects support for USB SD Host Controllers based on
881 CSR boards with this device include: USB<>SDIO (M1985v2),
892 This selects support for the SD/MMC Host Controller on
895 To compile this driver as a module, choose M here: the
902 This selects support for the Renesas USDHI6ROL0 SD/SDIO
923 This selects support for the SD/MMC Host Controller on
930 This selects the Command Queue Host Controller Interface (CQHCI)
933 This controller supports eMMC devices with command queue support.
935 If you have a controller with this interface, say Y or M here.
947 This selects the BCM2835 SDHOST MMC controller. If you have
952 sdhost controller (supported by this driver).
961 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
963 This is needed if support for any SD/SDIO/MMC devices is required.
970 This selects the Secure Digital Host Controller Interface (SDHCI)
973 If you have a controller with this interface, say Y or M here.
983 This selects support for the SDIO/SD/MMC Host Controller on
992 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
993 If you have a controller with this interface, say Y or M here.
1002 This selects the Secure Digital Host Controller Interface (SDHCI)
1006 If you have a controller with this interface, say Y or M here.
1015 This selects the Secure Digital Host Controller Interface (SDHCI)
1019 If you have a controller with this interface, say Y or M here.