Lines Matching full:this
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
12 Say Y to enable Linux LED support. This allows control of supported
20 This option enables the led sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say N.
27 This option enables the flash LED sysfs class in /sys/class/leds.
29 and kernel internal API to it. You'll need this to provide support
37 This option enables support for the brightness_hw_changed attribute
49 This option enables support for on-chip LED drivers found on Marvell
60 This option enables support for the LEDs on the AAT1290.
66 This option enables support for the AN30259A 3-channel
69 To compile this driver as a module, choose M here: the module
77 This driver makes the PC Engines APU1 front panel LEDs
83 To compile this driver as a module, choose M here: the
101 This option enables support for LEDs connected to the BCM6328
110 This option enables support for LEDs connected to the BCM6358
119 This option enables support for LEDs offered by Motorola's
128 This option enables support for CR0014114 LED Board which
132 To compile this driver as a module, choose M here: the module
140 This option enables support for the LCD backlight using
141 LM3530 ambient light sensor chip. This ALS chip can be
150 This option enables support for the LCD backlight using
151 LM3532 ambient light sensor chip. This ALS chip can be
160 This option enables support for the LEDs on National Semiconductor /
173 This option enables support for LEDs connected to LM3642.
183 This option enables support for the TI LM3692x family
192 This option enables support for the TI LM3601x family
200 This option enables support for the LEDs on Sharp Locomo.
208 This option enables support for the so called "User LED" of
216 This option enables support for on-chip LED drivers found on
224 This option enables support for LEDs connected to GPIO lines
232 This option enables support for the Soekris net4801 and net4826 error
240 This option enables support for the LEDs on the Freecom FSG-3.
247 This option enables support for the PCEngines WRAP programmable LEDs.
254 This option enables support for the front LED on Cobalt Qube series
261 This option enables support for the Cobalt Raq series LEDs.
269 This option enables support for the Left, Middle, and Right
277 Choose this option if you want to use the notification LED on
285 This option enables LED support for the handheld
293 This option enables support for NXP pca9532
312 This option enables support for the LEDs connected to GPIO
323 This option enables support for LEDs connected to the National
327 To compile this driver as a module, choose M here: the
337 This option enables support for LEDs connected to the Texas
340 To compile this driver as a module, choose M here: the
349 This option supports common operations for LP5521/5523/55231/5562/8501
400 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
409 This option enables support for the display cluster LEDs
418 This driver makes the mail LED accessible from userspace
419 programs through the leds subsystem. This LED have three
423 or through /sys/class/leds/clevo::mail/brightness. As this LED
428 This module can drive the mail LED for the following notebooks:
441 To compile this driver as a module, choose M here: the
449 This option enables support for LEDs connected to PCA955x
469 This option enables support for LEDs connected to the PCA963x
478 This option enables support for the status LEDs of the WM831x
486 This option enables support for LEDs driven by the Wolfson
494 This option enables support for on-chip LED drivers found
502 This option enables support for on-chip LED drivers found
510 This option enables support for DAC124S085 SPI DAC from NatSemi,
518 This option enables support for pwm driven LEDs
525 This option enables support for regulator driven LEDs.
532 This option enables support for BD2802GU RGB LED driver chips
541 This option enables support for the Intel SS4200 series of
543 drive or power LEDs on the front panel. Using this driver
552 This option enables support for LEDs driven by a Linear Technology
553 LT3593 controller. This controller uses a special one-wire pulse
561 This option enables support for on-chip LED drivers found
564 To compile this driver as a module, choose M here: the module will
572 This option enables support for on-chip LED drivers found
581 This option enables support for the dual-GPIO LEDs found on the
596 This option enables support for LEDs found on the LaCie 2Big
606 This option enables support for the LEDs on the HTC ASIC3. The HTC
608 cannot be used. This driver supports hardware blinking with an on+off
615 This option enables support for LEDs connected to TC6507
624 This option enables support for Texas Instruments TLC59108
640 This option enables support for the flash part of the MAX77693
648 This option enables support for on-chip LED drivers on
656 This option enables support for LEDs connected to LM3554
663 This option enables support for the LEDs on the Bachmann OT200.
672 This driver can also be built as a module. If so the module
680 This option enables support for KTD2692 LED flash connected
683 Say Y to enable this driver.
690 This option enables support for LEDs connected to ISSI IS31FL319x
694 This driver can also be built as a module. If so the module will be
713 This driver can also be built as a module. If so the module will be
723 This option enables support for the BlinkM RGB LED connected
732 This option enables support for the system LEDs present on
733 PowerNV platforms. Say 'y' to enable this support in kernel.
734 To compile this driver as a module, choose 'm' here: the module
743 This option enables support for the LEDs on syscon type
744 devices. This will only work with device tree enabled
752 Choose this option if you want to use the LED drivers in
760 This option enables support for the LEDs on the Mellanox
767 This option enables support for the LEDs on the Mellanox Ethernet and
769 device add call. Say Y to enable these. To compile this driver as a
776 This option enables support for userspace LEDs. Say 'y' to enable this
777 support in kernel. To compile this driver as a module, choose 'm' here:
785 This option enables support for the User1 and User2 LEDs on NI
788 To compile this driver as a module, choose M here: the module
797 This option enables support for LED controller which use a single byte
807 This supports common features between the TI LM3532, LM3631, LM3632,
816 This supports the LED device LM3697.
824 This supports the LED device LM36274.