Lines Matching refs:here
8 Say Y here, and a list of supported touchscreens will be displayed.
23 Say Y here if you have a 88PM860x PMIC and want to enable
28 To compile this driver as a module, choose M here: the
36 Say Y here if you have a touchscreen interface using the
47 To compile this driver as a module, choose M here: the
54 Say Y here if you have a touchscreen interface using the
60 To compile this driver as a module, choose M here: the
66 Say Y here if you want to support a touchscreen interface using
71 To compile this driver as a module, choose M here: the
79 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
81 To compile this driver as a module, choose M here: the
89 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
93 To compile this driver as a module, choose M here: the
101 Say Y here if you want to use the generic ADC
106 To compile this driver as a module, choose M here: the
113 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
118 To compile this driver as a module, choose M here: the
126 Say Y here if you have Atmel mXT series I2C touchscreen,
131 To compile this driver as a module, choose M here: the
140 Say Y here if you want support to output data from the T37
148 Say Y here if you have a AUO display with in-cell touchscreen
153 To compile this driver as a module, choose M here: the
160 Say Y here if you have a bu21013 touchscreen connected to
165 To compile this driver as a module, choose M here: the
172 Say Y here if you have a Rohm BU21029 touchscreen controller
177 To compile this driver as a module, choose M here: the
186 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
190 To compile this driver as a module, choose M here: the
197 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
201 To compile this driver as a module, choose M here: the
209 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
214 To compile this driver as a module, choose M here: the
220 Say Y here if you have a touchscreen using controller from
227 To compile this driver as a module, choose M here: the
234 Say Y here if the touchscreen is connected via I2C bus.
236 To compile this driver as a module, choose M here: the
243 Say Y here if the touchscreen is connected via SPI bus.
245 To compile this driver as a module, choose M here: the
254 Say Y here if you have a Cypress Gen4 touchscreen.
258 To compile this driver as a module, choose M here.
264 Say Y here if the touchscreen is connected via I2C bus.
266 To compile this driver as a module, choose M here: the
273 Say Y here if the touchscreen is connected via SPI bus.
275 To compile this driver as a module, choose M here: the
283 Say Y here to enable the support for the touchscreen found
288 To compile this driver as a module, choose M here: the
295 Say Y here to support the touchscreen found on Dialog Semiconductor
300 To compile this driver as a module, choose M here: the
307 Say Y here if you have a Dynapro serial touchscreen connected to
312 To compile this driver as a module, choose M here: the
319 Say Y here if you have a Hampshire serial touchscreen connected to
324 To compile this driver as a module, choose M here: the
331 Say Y here to enable support for I2C connected EETI touch panels.
333 To compile this driver as a module, choose M here: the
340 Say Y here to enable support for I2C connected EETI
343 To compile this driver as a module, choose M here: the
350 Say Y here to enable support for serial connected EETI
353 To compile this driver as a module, choose M here: the
360 Say Y here to enable support for I2C connected EETI
363 To compile this driver as a module, choose M here: the
370 Say Y here if you have the Fujitsu touchscreen (such as one
376 To compile this driver as a module, choose M here: the
384 Say Y here if you have the Goodix touchscreen (such as one
391 To compile this driver as a module, choose M here: the
398 Say Y here if you have a touchscreen using HiDeep.
402 To compile this driver as a module, choose M here : the
409 Say Y here if you have a ILI210X based touchscreen
417 To compile this driver as a module, choose M here: the
424 Say Y here if you want to add support for the IPROC touch
429 To compile this driver as a module, choose M here: the
437 Say Y here if you have the s3c2410 touchscreen.
441 To compile this driver as a module, choose M here: the
452 To compile this driver as module, choose M here: the
459 Say Y here if you have the Gunze AHL-51 touchscreen connected to
464 To compile this driver as a module, choose M here: the
471 Say Y here if you have an Elan eKTF2127 touchscreen
476 To compile this driver as a module, choose M here: the
483 Say Y here if you have an Elan eKTH I2C touchscreen
488 To compile this driver as a module, choose M here: the
495 Say Y here if you have an Elo serial touchscreen connected to
500 To compile this driver as a module, choose M here: the
507 Say Y here if you have an Wacom W8001 penabled serial touchscreen
512 To compile this driver as a module, choose M here: the
519 Say Y here if you want to use the I2C version of the Wacom
524 To compile this driver as a module, choose M here: the module
531 Say Y here if you have a LPC32XX device and want
534 To compile this driver as a module, choose M here: the
541 Say Y here if you have a MAX11801 based touchscreen
546 To compile this driver as a module, choose M here: the
553 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
558 To compile this driver as a module, choose M here: the
565 Say Y here if you have the MELFAS MMS114 touchscreen controller
570 To compile this driver as a module, choose M here: the
577 Say Y here if you have a MELFAS MIP4 Touchscreen device.
581 To compile this driver as a module, choose M here:
588 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
593 To compile this driver as a module, choose M here: the
600 Say Y here if you have a Freescale i.MX6UL, and want to
605 To compile this driver as a module, choose M here: the
612 Say Y here if you have an iNexio serial touchscreen connected to
617 To compile this driver as a module, choose M here: the
623 Say Y here if you have the ICS MicroClock MK712 touchscreen
628 To compile this driver as a module, choose M here: the
635 Say Y here if you have a HP Jornada 620/660/680/690 and want to
638 To compile this driver as a module, choose M here: the
645 Say Y here if you have a HP Jornada 710/720/728 and want
648 To compile this driver as a module, choose M here: the
655 Say Y here to enable support for the touchscreen attached to
660 To compile this driver as a module, choose M here: the
667 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
672 To compile this driver as a module, choose M here: the
679 Say Y here if you have a Penmount serial touchscreen connected to
684 To compile this driver as a module, choose M here: the
691 Say Y here if you have an EDT "Polytouch" touchscreen based
697 To compile this driver as a module, choose M here: the
705 Say Y here if you have the official Raspberry Pi 7 inch screen on
710 To compile this driver as a module, choose M here: the
717 Say Y here to enable MIGO-R touchscreen support.
721 To compile this driver as a module, choose M here: the
728 Say Y here if you have a Touchright serial touchscreen connected to
733 To compile this driver as a module, choose M here: the
740 Say Y here if you have a Touchwin serial touchscreen connected to
745 To compile this driver as a module, choose M here: the
752 Say Y here if you have 4/5/8 wire touchscreen controller
757 To compile this driver as a module, choose M here: the
773 To compile this driver as a module, choose M here: the
780 Say Y here if you have a pixcir i2c touchscreen
785 To compile this driver as a module, choose M here: the
792 Say Y here if you have a Weida WDT87XX I2C touchscreen
797 To compile this driver as a module, choose M here: the
807 To compile this driver as a module, choose M here: the
814 Say Y here if you have a Wolfson Microelectronics WM97xx
821 To compile this driver as a module, choose M here: the
829 Say Y here to enable support for the Wolfson Microelectronics
837 Say Y here to enable support for the Wolfson Microelectronics
845 Say Y here to enable support for the Wolfson Microelectronics
852 Say Y here for support for streaming mode with WM97xx touchscreens
857 To compile this driver as a module, choose M here: the
865 Say Y here for support for streaming mode with the touchscreen
870 To compile this driver as a module, choose M here: the
898 To compile this driver as a module, choose M here: the
905 Say Y here if you have a touchscreen connected to the low-resolution
908 To compile this driver as a module, choose M here: the module will be
917 To compile this driver as a module, choose M here: the
924 Say Y here if you have an Freescale MC13783 PMIC on your
929 To compile this driver as a module, choose M here: the
1022 Say Y here if you have an EasyTouch USB Touch controller.
1029 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1033 To compile this driver as a module, choose M here: the
1043 Say Y here if you have a touchscreen on a TS-4800 board.
1050 To compile this driver as a module, choose M here: the
1057 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1062 To compile this driver as a module, choose M here: the
1074 Say Y here if you have a TSC2004 based touchscreen.
1078 To compile this driver as a module, choose M here: the
1087 Say Y here if you have a TSC2005 based touchscreen.
1091 To compile this driver as a module, choose M here: the
1098 Say Y here if you have a TSC2007 based touchscreen.
1102 To compile this driver as a module, choose M here: the
1110 Saying Y here adds an iio interface to the tsc2007 which
1119 Say Y here if you have a Motorola EZX telephone and
1122 To compile this driver as a module, choose M here: the
1130 Say Y here if you have Raydium series I2C touchscreen,
1135 To compile this driver as a module, choose M here: the
1142 Say Y here if you have the Silead touchscreen connected to
1147 To compile this driver as a module, choose M here: the
1160 To compile this driver as a module, choose M here: the
1167 Say Y here if you want to support the Sitronix ST1232
1172 To compile this driver as a module, choose M here: the
1180 Say Y here if you want support for STMicroelectronics
1183 To compile this driver as a module, choose M here: the
1191 Say Y here if you want support for STMicroelectronics
1194 To compile this driver as a module, choose M here: the
1206 To compile this driver as a module, choose M here: the
1216 Say Y here if you want support for the Samsung SUR40 touchscreen
1219 To compile this driver as a module, choose M here: the
1227 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1232 To compile this driver as a module, choose M here: the
1239 Say Y here if you have a Semtech SX8654 touchscreen controller.
1243 To compile this driver as a module, choose M here: the
1251 Say Y here if you have a TPS6507x based touchscreen
1256 To compile this driver as a module, choose M here: the
1263 Say Y here if you have a touchscreen using Zeitec ZET6223
1267 To compile this driver as a module, choose M here: the
1275 Say Y here if you have a touchscreen using the zforce
1280 To compile this driver as a module, choose M here: the
1288 Say Y here if you have a Colibri VF50 and plan to use
1293 To compile this driver as a module, choose M here: the
1300 Say Y here if you have a touchscreen using ROHM BU21023/24.
1304 To compile this driver as a module, choose M here: the
1314 To compile this driver as a module, choose M here: the