467   PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG));  in dump_regs()
468   PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF));  in dump_regs()
469   PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF));  in dump_regs()
470   PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF));  in dump_regs()
471   PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF));  in dump_regs()
472   PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF));  in dump_regs()
588 	PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c,  in make_rate()
593 		PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");  in make_rate()
626 		PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div);  in make_rate()
650 			PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div);  in make_rate()
661 	PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div);  in make_rate()
665 		PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u",  in make_rate()
673 			PRINTD (DBG_QOS, "actual rate: %u", *actual);  in make_rate()
683   PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u",  in make_rate_with_tolerance()
715   PRINTD (DBG_FLOW, "hrz_open_rx %x", channel);  in hrz_open_rx()
723     PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open");  in hrz_open_rx()
730     PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr);  in hrz_open_rx()
734       PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE");  in hrz_open_rx()
738     PRINTD (DBG_VCC, "using IDLE buffer pointer");  in hrz_open_rx()
755   PRINTD (DBG_FLOW, "hrz_open_rx ok");  in hrz_open_rx()
797     PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc);  in hrz_close_rx()
872     PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2);  in hrz_close_rx()
885     PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr);  in hrz_close_rx()
893 	PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey");  in hrz_close_rx()
933       PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!");  in rx_schedule()
935 	PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion");  in rx_schedule()
951 	PRINTD (DBG_RX|DBG_BUS, "(pio)");  in rx_schedule()
955 	PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)");  in rx_schedule()
958 	PRINTD (DBG_RX|DBG_BUS, "(continuing multi)");  in rx_schedule()
980 	  PRINTD (DBG_RX|DBG_BUS, "(pio)");  in rx_schedule()
984 	  PRINTD (DBG_RX|DBG_BUS, "(full region)");  in rx_schedule()
987 	  PRINTD (DBG_RX|DBG_BUS, "(start multi region)");  in rx_schedule()
1002 	PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len);  in rx_schedule()
1032       PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev);  in rx_schedule()
1054     PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion");  in rx_bus_master_complete_handler()
1064   PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);  in tx_hold()
1066   PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);  in tx_hold()
1069   PRINTD (DBG_TX, "set tx_busy for dev %p", dev);  in tx_hold()
1077   PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev);  in tx_release()
1099       PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!");  in tx_schedule()
1101 	PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion");  in tx_schedule()
1113 	PRINTD (DBG_TX|DBG_BUS, "(pio)");  in tx_schedule()
1117 	PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)");  in tx_schedule()
1124 	PRINTD (DBG_TX|DBG_BUS, "(continuing multi)");  in tx_schedule()
1141 	  PRINTD (DBG_TX|DBG_BUS, "(pio)");  in tx_schedule()
1145 	  PRINTD (DBG_TX|DBG_BUS, "(full region)");  in tx_schedule()
1148 	  PRINTD (DBG_TX|DBG_BUS, "(start multi region)");  in tx_schedule()
1210     PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion");  in tx_bus_master_complete_handler()
1242   PRINTD (DBG_FLOW, "hrz_data_av_handler");  in rx_data_av_handler()
1246     PRINTD (DBG_RX, "locked out of rx lock");  in rx_data_av_handler()
1249   PRINTD (DBG_RX, "set rx_busy for dev %p", dev);  in rx_data_av_handler()
1263   PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry);  in rx_data_av_handler()
1274     PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!");  in rx_data_av_handler()
1279     PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len);  in rx_data_av_handler()
1307 	    PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)",  in rx_data_av_handler()
1315 	    PRINTD (DBG_SKB|DBG_WARN, "failed to get skb");  in rx_data_av_handler()
1329       PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)");  in rx_data_av_handler()
1354   PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id);  in interrupt_handler()
1378       PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted");  in interrupt_handler()
1383       PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted");  in interrupt_handler()
1388       PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted");  in interrupt_handler()
1393     PRINTD (DBG_IRQ, "work done: %u", irq_ok);  in interrupt_handler()
1395     PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source);  in interrupt_handler()
1398   PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id);  in interrupt_handler()
1428   PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev);  in setup_idle_tx_channel()
1434     PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel");  in setup_idle_tx_channel()
1437       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel");  in setup_idle_tx_channel()
1507       PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!");  in setup_idle_tx_channel()
1511     PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.",  in setup_idle_tx_channel()
1516 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0");  in setup_idle_tx_channel()
1521 	PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34");  in setup_idle_tx_channel()
1560   PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u",  in hrz_send()
1581     PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel");  in hrz_send()
1592       PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");  in hrz_send()
1633     PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d",  in hrz_send()
1640       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d",  in hrz_send()
1650     PRINTD (DBG_TX, "last vc hack: hit");  in hrz_send()
1653     PRINTD (DBG_TX, "last vc hack: miss");  in hrz_send()
1657 	PRINTD (DBG_TX, "vc already on channel: hit");  in hrz_send()
1661       PRINTD (DBG_TX, "vc already on channel: miss");  in hrz_send()
1665 	PRINTD (DBG_TX|DBG_ERR, "failed to get channel");  in hrz_send()
1671     PRINTD (DBG_TX, "got channel");  in hrz_send()
1678   PRINTD (DBG_TX, "using channel %u", tx_channel);  in hrz_send()
1695       PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)",  in hrz_send()
1706       PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)",  in hrz_send()
1826   PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl);  in hrz_init()
2032   PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu");  in check_max_sdu()
2037 	PRINTD (DBG_QOS, "defaulting max_sdu");  in check_max_sdu()
2040 	PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");  in check_max_sdu()
2046 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2052 	PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");  in check_max_sdu()
2066     PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2068     PRINTD (DBG_QOS, "luser gave negative min_pcr");  in atm_pcr_check()
2070     PRINTD (DBG_QOS, "pcr less than min_pcr");  in atm_pcr_check()
2076       PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR");  in atm_pcr_check()
2078       PRINTD (DBG_QOS, "luser gave negative max_pcr");  in atm_pcr_check()
2080       PRINTD (DBG_QOS, "pcr greater than max_pcr");  in atm_pcr_check()
2083       PRINTD (DBG_QOS, "xBR(pcr) OK");  in atm_pcr_check()
2086   PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d",  in atm_pcr_check()
2107   PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci);  in hrz_open()
2119     PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci);  in hrz_open()
2133       PRINTD (DBG_QOS|DBG_VCC, "AAL0");  in hrz_open()
2138       PRINTD (DBG_QOS|DBG_VCC, "AAL3/4");  in hrz_open()
2142       PRINTD (DBG_QOS|DBG_VCC, "AAL5");  in hrz_open()
2146       PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!");  in hrz_open()
2184   PRINTD (DBG_QOS, "TX:");  in hrz_open()
2201       PRINTD (DBG_QOS, "TX max_sdu check failed");  in hrz_open()
2235 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2246 	  PRINTD (DBG_QOS, "could not make rate from TX PCR");  in hrz_open()
2252 	  PRINTD (DBG_QOS, "TX PCR failed consistency check");  in hrz_open()
2283 	  PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");  in hrz_open()
2294 	  PRINTD (DBG_QOS, "could not make rate from TX SCR");  in hrz_open()
2300 	  PRINTD (DBG_QOS, "TX SCR failed consistency check");  in hrz_open()
2310 	  PRINTD (DBG_QOS, "shrinking bucket from %u to %u",  in hrz_open()
2320 	PRINTD (DBG_QOS, "unsupported TX traffic class");  in hrz_open()
2328   PRINTD (DBG_QOS, "RX:");  in hrz_open()
2338       PRINTD (DBG_QOS, "RX max_sdu check failed");  in hrz_open()
2358 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2367 	  PRINTD (DBG_QOS, "RX PCR failed consistency check");  in hrz_open()
2379 	  PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");  in hrz_open()
2388 	  PRINTD (DBG_QOS, "RX SCR failed consistency check");  in hrz_open()
2395 	PRINTD (DBG_QOS, "unsupported RX traffic class");  in hrz_open()
2404     PRINTD (DBG_QOS, "AAL not supported");  in hrz_open()
2421     PRINTD (DBG_QOS, "not enough TX PCR left");  in hrz_open()
2426     PRINTD (DBG_QOS, "not enough RX PCR left");  in hrz_open()
2434     PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR",  in hrz_open()
2441     PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources");  in hrz_open()
2454       PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX");  in hrz_open()
2482   PRINTD (DBG_VCC|DBG_FLOW, "hrz_close");  in hrz_close()
2518   PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR",  in hrz_close()
2534   PRINTD (DBG_FLOW|DBG_VCC, "hrz_getsockopt");
2553   PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
2573   PRINTD (DBG_FLOW, "hrz_ioctl");
2579   PRINTD (DBG_FLOW, "hrz_phy_get");
2586   PRINTD (DBG_FLOW, "hrz_phy_put");
2591   PRINTD (DBG_FLOW, "hrz_change_qos");
2601   PRINTD (DBG_FLOW, "hrz_proc_read");  in hrz_proc_read()
2659 	PRINTD (DBG_FLOW, "hrz_probe");  in hrz_probe()
2673 		PRINTD(DBG_ERR, "out of memory");  in hrz_probe()
2687 		PRINTD(DBG_WARN, "request IRQ failed!");  in hrz_probe()
2692 	PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",  in hrz_probe()
2698 		PRINTD(DBG_ERR, "failed to register Madge ATM adapter");  in hrz_probe()
2703 	PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p",  in hrz_probe()
2714 		PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu",  in hrz_probe()
2768 		PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering.");  in hrz_probe()
2807 	PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev);  in hrz_remove_one()
2887   PRINTD (DBG_FLOW, "cleanup_module");  in hrz_module_exit()