Lines Matching refs:loaded

454 	- If 0, the protected-mode code is loaded at 0x10000.
455 	- If 1, the protected-mode code is loaded at 0x100000.
499   loaded at 0x90000, it gets moved there later in the loading
507   if the real-mode code is loaded at 0x90000.
640   true.)  A relocatable kernel that is loaded at an alignment
657   be loaded at any address that satisfies the kernel_alignment field.
659   point to the loaded code, or to a boot loader hook.
921      can be loaded at another address, but it is internally
923      real-mode code must be loaded at 0x90000.
1001 		   loaded at 0x90000 */
1022 It should be loaded at address 0x10000 for Image/zImage kernels and
1066 	An initrd should be loaded.  The meaning of <file> is
1074 	The boot image which was loaded.  Again, the meaning of <file>
1091 kernel.  This means that if you loaded your real-mode kernel code at
1095 kernel code (0x9000 if the code is loaded at 0x90000), sp should be
1120 switched off, especially if the loaded kernel has the floppy driver as
1121 a demand-loaded module!
1166 from offset 0x01f1 of kernel image on should be loaded into struct
1181 32-bit kernel entry point, which is the start address of loaded
1185 disabled; a GDT must be loaded with the descriptors for selectors
1203 loaded into struct boot_params and examined. The end of setup header
1215 kernel could be loaded above 4G.
1218 64-bit kernel entry point, which is the start address of loaded
1222 The range with setup_header.init_size from start address of loaded
1224 a GDT must be loaded with the descriptors for selectors