Lines Matching refs:NVRAM
44 10.2.11 Serial NVRAM
51 12. Serial NVRAM support (by Richard Waltham)
53 17.2 Symbios NVRAM layout
54 17.3 Tekram NVRAM layout
161 Serial NVRAM: Symbios and Tekram formats
226 If your controller has NVRAM, you can configure this feature per target
242 If your controller does not have NVRAM or if it is managed by the SDMS
488 If a host SCSI id is available from the NVRAM, the driver will ignore
527 10.2.11 Serial NVRAM
529 nvram=n do not look for serial NVRAM
530 nvram=y test controllers for onboard serial NVRAM
533 0x01 look for NVRAM (equivalent to nvram=y)
534 0x02 ignore NVRAM "Synchronous negotiation" parameters for all devices
535 0x04 ignore NVRAM "Wide negotiation" parameter for all devices
536 0x08 ignore NVRAM "Scan at boot time" parameter for all devices
537 0x80 also attach controllers set to OFF in the NVRAM (sym53c8xx only)
587 driver or devices in the NVRAM with minimal features.
683 17. Serial NVRAM (added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
687 Enabling serial NVRAM support enables detection of the serial NVRAM included
689 serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
692 The Symbios NVRAM also holds data on the boot order of host adaptors in a
696 Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
706 The parameters the driver is able to get from the NVRAM depend on the
727 17.2 Symbios NVRAM layout
729 typical data at NVRAM address 0x100 (53c810a NVRAM)
786 NVRAM layout details
788 NVRAM Address 0x000-0x0ff not used
838 default set up is identical for 53c810a and 53c875 NVRAM
861 default set up is identical for 53c810a and 53c875 NVRAM
889 | | -- ?? max sync offset (0x08 in NVRAM on 53c810a)
890 | | (0x10 in NVRAM on 53c875)
905 default set up for 53c810a NVRAM
906 default set up for 53c875 NVRAM - bus width - 0x10
917 default set up is identical for 53c810a and 53c875 NVRAM
925 default set up is identical for 53c810a and 53c875 NVRAM
930 17.3 Tekram NVRAM layout