Lines Matching refs:BusLogic
1 BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
19 BusLogic, Inc. designed and manufactured a variety of high performance SCSI
22 BusLogic was acquired by Mylex Corporation in February 1996, but the products
23 supported by this driver originated under the BusLogic name and so that name is
26 This driver supports all present BusLogic MultiMaster Host Adapters, and should
28 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
31 well and have very low command latency. BusLogic has recently provided me with
39 My primary goals in writing this completely new BusLogic driver for Linux are
40 to achieve the full performance that BusLogic SCSI Host Adapters and modern
47 The latest information on Linux support for BusLogic SCSI Host Adapters, as
135 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
140 addition, BusLogic's Strict Round Robin Mode is used to optimize host adapter
191 /proc/scsi/BusLogic/<N> interface.
195 On systems that support shared interrupts, any number of BusLogic Host
201 The following list comprises the supported BusLogic SCSI Host Adapters as of
202 the date of this document. It is recommended that anyone purchasing a BusLogic
253 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
256 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
274 BusLogic driver.
300 that previous BusLogic SCSI Host Adapters respond to. This driver supports
302 However, if the obsolete BusLogic driver must be used for any reason, such as
304 BusLogic has provided an AutoSCSI configuration option to enable a legacy ISA
317 In systems with multiple BusLogic PCI Host Adapters, the order in which the
358 BusLogic Driver Options may be specified either via the Linux Kernel Command
361 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
367 The BusLogic Driver Probing Options comprise the following:
373 specified, then the standard list of BusLogic MultiMaster ISA I/O Addresses
380 The "NoProbe" option disables all probing and therefore no BusLogic Host
385 The "NoProbeISA" option disables probing of the standard BusLogic ISA I/O
416 The BusLogic Driver Tagged Queuing Options allow for explicitly specifying
451 based on the firmware version of the BusLogic Host Adapter and based on
476 The BusLogic Driver Miscellaneous Options comprise the following:
492 The BusLogic Driver Debugging Options comprise the following:
525 linux BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30
529 append = "BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"
533 insmod BusLogic.o \
534 'BusLogic="QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"'
545 To install the new BusLogic SCSI driver, you may use the following commands,
549 tar -xvzf BusLogic-2.0.15.tar.gz
550 mv README.* LICENSE.* BusLogic.[ch] FlashPoint.c linux/drivers/scsi
551 patch -p0 < BusLogic.patch (only for 2.0.33 and below)
562 The BusLogic Announcements Mailing List provides a forum for informing Linux
564 for BusLogic SCSI Host Adapters. To join the mailing list, send a message to