Lines Matching full:area
201 The driver defines three areas on the 3270 screen: the log area, the
202 input area, and the status area.
204 The log area takes up all but the bottom two lines of the screen. The
206 down. When it fills, the status area changes from "Linux Running" to
210 The input area extends from the beginning of the second-to-last screen
211 line to the start of the status area. You type commands in this area
214 The status area initializes to "Linux Running" to give you a warm
215 fuzzy feeling. When the log area fills up and output awaits, it
219 the input area to toggle between "Linux More..." and "Linux Holding",
231 Other things you may do when the log area fills up are: hit PA2 to
232 clear the log area and write more output to it, or hit CLEAR to clear
233 the log area and the input area and write more output to the log area.
240 the same thing from the input area, by typing "^C" and hitting ENTER.
242 PA2 causes the log area to be cleared. If output awaits, it is then
243 written to the log area.
261 command stack (default depth 20) and displayed in the input area. You
263 command is entered into the stack only when the input area is not made