Lines Matching refs:checksum
103 Transport checksum handling
106 When an address is translated by ILA, an encapsulated transport checksum
109 including checksum offload in NICs, that process the checksum. There are
112 - no action Allow the checksum to be incorrect on the wire. Before
113 a receiver verifies a checksum the ILA to SIR address
116 - adjust transport checksum
118 and if a transport layer checksum is found then it is
119 adjusted to reflect the correct checksum per the
122 - checksum neutral mapping
125 the checksum. The low order sixteen bits of the identifier
130 Note that the checksum neutral adjustment affects the low order sixteen
170 If the C-bit is present, this is used as an indication that checksum
174 In the simplest format the identifier types, C-bit, and checksum
184 The checksum neutral adjustment may be configured to always be
186 checksum adjustment is in the low order 16 bits. The identifier is
195 The C-bit may used to explicitly indicate that checksum neutral
206 configuration. The checksum neutral adjustment may automatically
261 # Configure an ILA route that uses checksum neutral mapping as well
267 # Configure an ILA LWT route that uses auto checksum neutral mapping
281 # Configure an ILA to SIR mapping where checksum neutral is automatically