15 - Speed and Duplex Configuration
40 	For more information about the AutoNeg, Duplex, and Speed
41         parameters, see the "Speed and Duplex Configuration" section in
58 advertised by the adapter.  When this parameter is used, the Speed and
62        Refer to the Speed and Duplex section of this readme for more
243 Speed  section in Command Line Parameters
251 Speed forces the line speed to the specified value in megabits per second
254 speed.  Duplex should also be set when Speed is set to either 10 or 100.
335 Speed and Duplex Configuration
339 These keywords are Speed, Duplex, and AutoNeg.
350 - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
353 - If Speed = 10 or 100, then both Speed and Duplex should be set.  Auto-
369 Speed (Mbps)   N/A    N/A    1000    N/A     100    100    10      10
385 Note that when this parameter is used, Speed and Duplex must not be specified.
388 parameter should not be used.  Instead, use the Speed and Duplex parameters