Lines Matching refs:SW3
804 SW3 1-8: Node ID Select
820 The eight switches in group SW3 are used to set the node ID. Each node
1942 SW3 1-5: IRQ Select
1952 The eight switches in SW3 are used to set the node ID. Each node attached
2013 *) To enable the Boot ROM set the switch 8 of switch block SW3 to position ON.
2021 Switches 1-5 of the switch block SW3 control the IRQ level.
2036 The switches 6-7 of the switch block SW3 are used to determine the timeout
2772 | SW3 | || | |
2791 SW3 1-5: IRQ Select
2797 Although the jumpers SW1 and SW3 are marked SW, not JP, they are jumpers, not
2885 *) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.
2892 Jumpers 1-5 of the jumper block SW3 control the IRQ level.
2907 The jumpers 6-7 of the jumper block SW3 are used to determine the timeout
2958 SW3 1-8: Node ID Select
3023 The eight switches in group SW3 are used to set the node ID.