Lines Matching refs:SW1
775 < | SW1 | | SW2 | |
801 SW1 1-6: I/O Base Address Select
861 The first six switches in switch group SW1 are used to select one
904 Switches seven through ten of switch group SW1 are used to select the
1032 SW1: DIP-Switches for Station Address
1054 The station address is binary-coded with SW1.
1301 | | 90C65 || SW1 | ____|
1377 The last three switches in switch block SW1 are used to select one
1400 Switches 1-5 of switch block SW1 select the Memory Base address.
1513 < | PROM | | SW1 | A | 2 | ID3
1532 SW1 1-6: Base I/O Address Select
1587 The first six switches in switch block SW1 are used to select the I/O Base
1609 The switches 7-10 of switch block SW1 are used to select the Memory
1667 | | SW1 | LED |__|
1785 | |SW1| o|o |
1796 SW1 1-6 Base I/O Address Select
1837 The switches 1 to 6 of switch block SW1 are used to select one
1862 Jumpers 7-10 of switch block SW1 select the Memory Base address.
1916 | | | SW1 | XTAL | ____________ | S |
1925 | | SW1 | ON | | |I | |
1939 SW1 1-5: Base Memory Address Select
1976 The last three switches in switch block SW1 are used to select one
1999 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2055 | |SW1 MEM+I/O| |_________________________| LED1|__|)
2079 SW1 1-5 Base Memory Address Select
2116 The last three switches in switch block SW1 are used to select one
2139 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2413 | |o|o|o|o|o|o|o|o| | SW1 || SW2 ||
2438 The eight switches in group SW1 are used to set the node ID.
2585 8-Bit card, because there isn't any letter like "SW1" written to the
2668 The first three switches in switch group SW1 are used to select one
2689 Switches 6-8 of switch group SW1 select the Base of the 16K block.
2691 positions, determined by the offset, switches 4 and 5 of group SW1.
2765 | | | SW1 | | | | ID6
2788 SW1 1-5: Base Memory Address Select
2797 Although the jumpers SW1 and SW3 are marked SW, not JP, they are jumpers, not
2848 The last three switches in switch block SW1 are used to select one
2871 Jumpers 3-5 of jumper block SW1 select the Memory Base address.
2935 | | SW1 | | SL90C65 | : |- | |
2952 SW1 1-5: IRQ Select
2963 SW1: Timeouts, Interrupt and ROM
2967 up (on) SW1...(switches 1-5)
2970 The switches on SW1 labeled EXT1 (switch 6) and EXT2 (switch 7)
2974 To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.