Lines Matching refs:camera
41 if you want to run more than 1 camera simultaneously). These routines fall
50 camera; some programs depend on a particular image-size or -format and
84 allocated during open(), so nothing is wasted when the camera is not in
96 With this option you can control the compression factor that the camera
119 this is let the LED blink while the camera is in use. This::
129 By default the camera's LED is on solid while in use, and turned off
130 when the camera is not used anymore.
137 open the camera device. Until then, the LED remains on.
141 never know what device a camera gets assigned; it depends on module load
145 should use with a specific camera. This is also handy if you have two
148 A camera is specified by its type (the number from the camera model,
167 dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1,
170 dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber
172 camera model with the 4567 serial
175 dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the
188 - If a camera does not match any dev_hint, it will simply get assigned
235 cameras. Each camera has its own set of buffers.
243 preference for all camera's, but this parameter can be set per camera with