Lines Matching full:ir
17 a bi-directional interface for transporting raw IR and decoded scancodes
20 file_operations defined on it. With respect to transporting raw IR and
24 raw IR into scancodes.
31 rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
43 - ir-ctl: can receive raw IR and transmit IR, as well as query LIRC
46 - ir-keytable: can load keymaps; allows you to set IR kernel protocols; load
47 BPF IR decoders and test IR decoding. Some BPF IR decoders are also
56 LIRC supports some modes of receiving and sending IR codes, as shown
65 This mode is for both sending and receiving IR.
69 set to the :ref:`IR protocol <Remote_controllers_Protocols>`, and all other
74 :ref:`IR protocol <Remote_controllers_Protocols>` is set in
104 This mode is used only for IR receive.
113 Signifies the presence of IR in microseconds.
117 Signifies absence of IR in microseconds.
129 :ref:`lirc_set_rec_timeout` expires due to no IR being detected,
131 no IR.
144 This mode is used only for IR send.
147 BPF based IR decoder
151 :ref:`IR protocols <Remote_controllers_Protocols>`, but there
154 LIRC devices which support reading raw IR.