Lines Matching full:it
8 .. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
23 It should be noted, however, that new OFDM delivery systems like ISDB
43 - ``scale`` - Scale for the value. It can be:
46 frontend, but it was not possible to collect it (could be a
70 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
89 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
110 In order to get the BER (Bit Error Rate) measurement, it should be
115 bit count measurements. The frontend may reset it when a
120 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
137 It should be noted that this measurement can be smaller than the total
143 bit count measurements. The frontend may reset it when a
148 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
167 In order to get the BER (Bit Error Rate) measurement, it should be
172 bit count measurements. The frontend may reset it when a
177 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
194 It should be noted that this measurement can be smaller than the total
200 bit count measurements. The frontend may reset it when a
205 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
221 bit count measurements. The frontend may reset it when a
226 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
242 It can be used to calculate the PER indicator, by dividing
248 - ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the