Lines Matching refs:defined

84 The modulation can be one of the types defined by enum :c:type:`fe_modulation`.
90 supported by each delivery system, as currently defined by specs.
110    defined currently at the Kernel. The reason is simple: no driver
166 The acceptable values are defined by :c:type:`fe_spectral_inversion`.
194 The acceptable values are defined by :c:type:`fe_code_rate`.
209 The acceptable values are defined by :c:type:`fe_sec_voltage`.
229 The acceptable values are defined by :c:type:`fe_pilot`.
241 The acceptable values are defined by :c:type:`fe_rolloff`.
275 The acceptable values are defined by :c:type:`fe_delivery_system`.
442 defined by :c:type:`fe_code_rate`.
456 The modulation used by a given ISDB Layer, as defined by
723 The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`.
735 The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`.
747 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
759 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
771 The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`.
783 The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`.
839 The acceptable values are defined by :c:type:`fe_transmit_mode`.
849 The acceptable values are defined by :c:type:`fe_transmit_mode`.
857 The acceptable values are defined by :c:type:`fe_guard_interval`.
883 The acceptable values are defined by :c:type:`fe_transmit_mode`.
918 The acceptable values are defined by :c:type:`fe_hierarchy`.
966 The acceptable values are defined by :c:type:`fe_delivery_system`.
976 The acceptable values are defined by :c:type:`fe_interleaving`.
1007 layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.