Lines Matching refs:when
42 - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command
45 - snps,disable_scramble_quirk: true when SW should disable data scrambling.
47 - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
51 - snps,req_p1p2p3_quirk: when set, the core will always request for
53 - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
55 - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
57 - snps,lfps_filter_quirk: when set core will filter LFPS reception.
58 - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
60 - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
63 - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
64 - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
65 - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
69 - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
71 - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
74 - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
76 - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
78 - snps,dis_metastability_quirk: when set, disable metastability workaround.
80 - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
81 utmi_l1_suspend_n, false when asserts utmi_sleep_n
84 UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
86 register for post-silicon frame length adjustment when the