Lines Matching refs:dwc3
3 This file documents the parameters for the dwc3-st driver.
4 This driver controls the glue logic used to configure the dwc3 core on
8 - compatible : must be "st,stih407-dwc3"
32 The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
33 example below. The DT binding details of dwc3 can be found in:
34 Documentation/devicetree/bindings/usb/dwc3.txt
37 is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
44 st_dwc3: dwc3@8f94000 {
45 compatible = "st,stih407-dwc3";
58 dwc3: dwc3@9900000 {
59 compatible = "snps,dwc3";