Lines Matching full:one
30 control one or more internal sensors.
35 Size: one cell nodes with only one sensor, and at least 1 on nodes
64 Size: one cell to specify minimum and maximum cooling state used
80 Size: one cell
84 Size: one cell
112 Size: one cell The contribution is a ratio of the sum
125 thermal zone node must contain, apart from its own properties, one sub-node
126 containing trip nodes and one sub-node containing all the zone cooling maps.
131 Size: one cell
135 Size: one cell
150 - coefficients: An array of integers (one signed cell) containing
152 Elem size: one cell the sensors listed in the thermal-sensors property.
163 Size: one cell control temperature. For reference, the
194 The CPU thermal zone example below describes how to setup one thermal zone
195 using one single sensor as temperature source and many cooling devices and
403 In the example above, there is one bandgap IC which has the capability to
406 hotspots: one for CPU thermal zone, one for GPU thermal zone and the
419 (c) - Several sensors within one single thermal zone
421 The example below illustrates how to use more than one sensor within
422 one thermal zone.
469 In some cases, there is a need to use more than one sensor to extrapolate
490 The board thermal example below illustrates how to setup one thermal zone
585 sensors used to monitor different zones, one of them is composed by several sensors and