Lines Matching +full:spi +full:- +full:cs +full:- +full:high

4   - compatible : Should be "nxp,lx2160a-fspi"
5   - reg :        First contains the register location and length,
7   - reg-names :  Should contain the resource reg names:
8 	         - fspi_base: configuration register address space
9                  - fspi_mmap: memory mapped address space
10   - interrupts : Should contain the interrupt for the device
12 Required SPI slave node properties:
13   - reg :        There are two buses (A and B) with two chip selects each.
14                  This encodes to which bus and CS the flash is connected:
15                  - <0>: Bus A, CS 0
16                  - <1>: Bus A, CS 1
17                  - <2>: Bus B, CS 0
18                  - <3>: Bus B, CS 1
20 Example showing the usage of two SPI NOR slave devices on bus A:
22 fspi0: spi@20c0000 {
23 	compatible = "nxp,lx2160a-fspi";
25 	reg-names = "fspi_base", "fspi_mmap";
26 	interrupts = <0 25 0x4>; /* Level high type */
28 	clock-names = "fspi_en", "fspi";