Lines Matching +full:mac +full:- +full:address

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - David S. Miller <davem@davemloft.net>
16   local-mac-address:
18       - $ref: /schemas/types.yaml#definitions/uint8-array
19       - items:
20           - minItems: 6
23       Specifies the MAC address that was assigned to the network device.
25   mac-address:
27       - $ref: /schemas/types.yaml#definitions/uint8-array
28       - items:
29           - minItems: 6
32       Specifies the MAC address that was last used by the boot
33       program; should be used in cases where the MAC address assigned
35       local-mac-address property.
37   max-frame-size:
44   max-speed:
49   nvmem-cells:
52       Reference to an nvmem node for the MAC address
54   nvmem-cells-names:
55     const: mac-address
57   phy-connection-type:
61       # There is not a standard bus between the MAC and the PHY,
63       # MAC.
64       - internal
65       - mii
66       - gmii
67       - sgmii
68       - qsgmii
69       - tbi
70       - rev-mii
71       - rmii
73       # RX and TX delays are added by the MAC when required
74       - rgmii
77       # the MAC should not add the RX or TX delays in this case
78       - rgmii-id
80       # RGMII with internal RX delay provided by the PHY, the MAC
82       - rgmii-rxid
84       # RGMII with internal TX delay provided by the PHY, the MAC
86       - rgmii-txid
87       - rtbi
88       - smii
89       - xgmii
90       - trgmii
91       - 1000base-x
92       - 2500base-x
93       - rxaui
94       - xaui
96       # 10GBASE-KR, XFI, SFI
97       - 10gbase-kr
98       - usxgmii
100   phy-mode:
101     $ref: "#/properties/phy-connection-type"
103   phy-handle:
109     $ref: "#/properties/phy-handle"
112   phy-device:
113     $ref: "#/properties/phy-handle"
116   rx-fifo-depth:
124   tx-fifo-depth:
132       - $ref: /schemas/types.yaml#definitions/string
133       - default: auto
135           - auto
136           - in-band-status
138       Specifies the PHY management type. If auto is set and fixed-link
141   fixed-link:
143       - if:
151               - minimum: 0
155                   specified fixed-links
157               - enum: [0, 1]
162               - enum: [10, 100, 1000]
166               - enum: [0, 1]
170               - enum: [0, 1]
176       - if:
182                 - $ref: /schemas/types.yaml#definitions/uint32
183                 - enum: [10, 100, 1000]
187             full-duplex:
190                 Indicates that full-duplex is used. When absent, half
193             asym-pause:
198             link-gpios:
204             - speed