Lines Matching full:ecc
5 the nand controller interface driver and the ECC engine driver.
23 - ecc-engine: Required ECC Engine node.
36 ecc-engine = <&bch>;
49 - nand-ecc-mode: the NAND ecc mode (check driver for supported modes)
50 - nand-ecc-step-size: Number of data bytes covered by a single ECC step.
55 - nand-ecc-strength: Number of bits to correct per ECC step.
65 E : nand-ecc-strength.
71 Q : nand-ecc-step-size.
75 this number depends on max ecc step size
77 If max ecc step size supported is 1024,
79 ecc step size is 512, then it should be
127 nand-ecc-mode = "hw";
128 nand-ecc-strength = <24>;
129 nand-ecc-step-size = <1024>;
155 2) ECC Engine:
160 "mediatek,mt2701-ecc",
161 "mediatek,mt2712-ecc",
162 "mediatek,mt7622-ecc".
163 - reg: Base physical address and size of ECC.
164 - interrupts: Interrupts of ECC.
165 - clocks: ECC required clocks.
166 - clock-names: ECC clocks internal name.
170 bch: ecc@1100e000 {
171 compatible = "mediatek,mt2701-ecc";