Lines Matching full:boot
11 In order to boot ARM Linux, you require a boot loader, which is a small
12 program that runs before the main kernel. The boot loader is expected
16 Essentially, the boot loader should provide (as a minimum) the
30 Existing boot loaders:
32 New boot loaders:
35 The boot loader is expected to find and initialise all RAM that the
39 the RAM in the machine, or any other method the boot loader designer
46 Existing boot loaders:
48 New boot loaders:
51 The boot loader should initialise and enable one serial port on the
56 As an alternative, the boot loader can pass the relevant 'console='
66 Existing boot loaders:
68 New boot loaders:
71 The boot loader should detect the machine type its running on by some
74 The boot loader must ultimately be able to provide a MACH_TYPE_xxx
82 4. Setup boot data
85 Existing boot loaders:
87 New boot loaders:
90 The boot loader must provide either a tagged list or a dtb image for
92 boot data is passed to the kernel in register r2.
97 The boot loader must create and initialise the kernel tagged list.
108 The boot loader must pass at a minimum the size and location of
129 The boot loader must load a device tree image (dtb) into system ram
130 at a 64bit aligned address and initialize it with the boot data. The
136 The boot loader must pass at a minimum the size and location of the
147 Existing boot loaders:
149 New boot loaders:
164 Existing boot loaders:
166 New boot loaders:
171 then it is legal for the boot loader to call the zImage in flash
177 prior to decompression, which will make the boot process slightly
206 these extensions. This is the recommended boot method for such CPUs,
228 virtualization extensions can boot correctly without extra help.
230 - The boot loader is expected to call the kernel image by jumping