Lines Matching refs:lockup
311 This value controls the hard lockup detector behavior when a hard
312 lockup condition is detected as to whether or not to gather further
325 when a hard lockup is detected.
327 0 - don't panic on hard lockup
328 1 - panic on hard lockup
330 See Documentation/admin-guide/lockup-watchdogs.rst for more information. This can
479 (i.e. the hard lockup detector) on x86 systems.
481 0 - disable the hard lockup detector
483 1 - enable the hard lockup detector
485 The hard lockup detector monitors each CPU for its ability to respond to
1017 This value controls the soft lockup detector thread's behavior
1018 when a soft lockup condition is detected as to whether or not
1033 This parameter can be used to control the soft lockup detector.
1035 0 - disable the soft lockup detector
1037 1 - enable the soft lockup detector
1039 The soft lockup detector monitors CPUs for threads that are hogging the CPUs
1044 detect a hard lockup condition.
1085 16384 `(L)` soft lockup occurred
1131 This parameter can be used to disable or enable the soft lockup detector
1132 _and_ the NMI watchdog (i.e. the hard lockup detector) at the same time.
1134 0 - disable both lockup detectors
1136 1 - enable both lockup detectors
1138 The soft lockup detector and the NMI watchdog can also be disabled or
1160 if a kernel lockup was suspected on those cores.
1173 events and the soft and hard lockup thresholds. The default threshold
1177 tunable to zero will disable lockup detection altogether.