Lines Matching refs:selection

38 Since the hardware P-state selection interface used by ``intel_pstate`` is
70 provides its own scaling algorithms for P-state selection.  Those algorithms
73 ``sysfs``).  [Note that different P-state selection algorithms may be chosen for
79 For example, the ``powersave`` P-state selection algorithm provided by
83 There are two P-state selection algorithms provided by ``intel_pstate`` in the
88 Which of the P-state selection algorithms is used by default depends on the
103 internal P-state selection logic.  What those hints are depends on which P-state
104 selection algorithm has been applied to the given policy (or to the CPU it
107 Even though the P-state selection is carried out by the processor automatically,
109 in this mode.  However, they are not used for running a P-state selection
119 internal P-state selection logic is expected to focus entirely on performance.
125 internal P-state selection logic is always restricted to the upper boundary
136 internal P-state selection logic to be less performance-focused.
149 CPU scheduler in order to run a P-state selection algorithm, either
158 Without HWP, this P-state selection algorithm is always the same regardless of
165 This is the default P-state selection algorithm if the
172 Without HWP, this P-state selection algorithm is similar to the algorithm
184 This is the default P-state selection algorithm if the
205 in ``sysfs`` (and the P-state selection algorithms described above are not
459 	List of P-state selection algorithms provided by ``intel_pstate``.
462 	P-state selection algorithm provided by ``intel_pstate`` currently in
514 change in order to request its internal P-state selection logic to always set
531 selection logic by focusing it on performance or on energy-efficiency, or