Lines Matching full:attribute
132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
284 * attribute given in wiphy capabilities.
340 * attribute %NL80211_ATTR_IFINDEX.
482 * using the %NL80211_ATTR_IE attribute. The first cycle of the
485 * scans, it will allow such when the caller provides the flag attribute
565 * included %NL80211_ATTR_FRAME attribute contains the management frame
568 * case the %NL80211_ATTR_FRAME attribute is replaced with a
575 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
576 * request is for the initial association to an ESS (that attribute not
577 * included) or for reassociation within the ESS (that attribute is
596 * FREQ attribute (for the initial frequency if no peer can be found)
597 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
601 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
606 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
607 * to identify the device, and the TESTDATA blob attribute to pass through
613 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
645 * This attribute is ignored if driver does not support roam scan.
648 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
688 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
699 * requires an interface index, a frame type attribute (optional for
701 * and a match attribute containing the first few bytes of the frame
706 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
728 * counters which will be updated to the current value. This attribute
808 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
813 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
837 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
850 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
960 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
963 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
964 * used in the wiphy data as a nested attribute containing descriptions
970 * that attribute is not included, QoS mapping is disabled. Since this
980 * If the admitted time attribute is not added then the request just checks
1024 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
1032 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
1058 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
1106 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
1119 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
1123 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
1126 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
1166 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
1171 * is passed using %NL80211_ATTR_TID_CONFIG attribute.
1473 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
1481 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
1484 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
1495 * this attribute)
1499 * This attribute is now deprecated.
1532 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
1533 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
1556 * given for %NL80211_CMD_GET_STATION, nested attribute containing
1567 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
1575 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
1576 * to query the CRDA to retrieve one regulatory domain. This attribute can
1597 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
1598 * supported interface types, each a flag attribute with the number
1608 * a single scan request, a wiphy attribute.
1610 * scan with a single scheduled scan request, a wiphy attribute.
1616 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
1618 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
1619 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
1628 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
1632 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
1635 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
1645 * due to considerations from a beacon hint. This attribute reflects
1647 * attributes consists of a nested attribute containing
1650 * due to considerations from a beacon hint. This attribute reflects
1652 * attributes consists of a nested attribute containing
1666 * this attribute can be used with %NL80211_CMD_ASSOCIATE and
1673 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
1686 * attribute is also used as a flag in the wiphy information to
1694 * socket. If this attribute is missing, then legacy behavior of sending
1710 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
1725 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
1739 * Reassociate Request frame (with the value of this attribute in the
1743 * @NL80211_ATTR_KEY: key information in a nested attribute with
1746 * and join_ibss(), key information is in a nested attribute each
1762 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
1767 * cache, a wiphy attribute.
1770 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
1780 * rates based on negotiated supported rates information. This attribute
1790 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
1794 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
1795 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1798 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
1799 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1802 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
1808 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
1810 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
1866 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
1872 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
1892 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
1910 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
1913 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
1918 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
1922 * nested array attribute containing an entry for each band, with the entry
1940 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
1948 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
1954 * applications use this attribute.
1955 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
1972 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
1974 * with support for the features listed in this attribute, see
1982 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
1986 * This attribute holds a bitmap of the supported protocols for
1993 * this feature during association. This is a flag attribute.
1996 * this feature during association. This is a flag attribute.
1999 * this feature during association. This is a flag attribute.
2025 * this attribute is (depending on the driver capabilities) added to
2048 * Status code). However, those fields are included in the attribute data
2049 * for all authentication algorithms to keep the attribute definition
2068 * carried in a u32 attribute
2073 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
2094 * &enum nl80211_protocol_features, the attribute is a u32.
2096 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
2117 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
2119 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
2154 * u8 attribute.
2160 * attribute is also used for vendor command feature advertisement
2171 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
2180 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
2186 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
2199 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
2210 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
2214 * shall support Radio Resource Measurements (11k). This attribute can be
2226 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
2232 * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
2233 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
2235 * (per second) (u16 attribute)
2244 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
2269 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
2273 * scheduled scan supported by the device (u32), a wiphy attribute.
2275 * a scan plan (u32), a wiphy attribute.
2277 * a scan plan (u32), a wiphy attribute.
2283 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
2284 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
2288 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
2292 * it contains the behaviour-specific attribute containing the parameters for
2298 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
2300 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
2315 * This attribute is used only if all interfaces are in monitor mode.
2316 * Set this attribute in order to monitor packets using the given MU-MIMO
2327 * attribute must not be included).
2332 * maximum measurement duration allowed. This attribute is used with
2335 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
2351 * would be set. This attribute is used with
2357 * attribute.
2358 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
2363 * Request/Response frame protection. This attribute contains the 16 octet
2367 * packets should be send out as unicast to all stations (flag attribute).
2383 * better BSSs. The attribute value is a packed structure
2387 * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
2412 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
2417 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
2420 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
2425 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
2432 * authentication operation (u32 attribute with an
2435 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
2436 * space supports external authentication. This attribute shall be used
2442 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
2444 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
2457 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
2462 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
2466 * if the attribute is not given no timeout is requested. Note that 0 is an
2482 * allows to set Tx power for a station. If this attribute is not included,
2487 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
2493 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
2498 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
2500 * the allowed channel bandwidth configurations. (u8 attribute)
2506 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
2508 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
2510 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
2516 * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
2553 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
2559 * discovery. It is a nested attribute, see
2563 * unsolicited broadcast probe response. It is a nested attribute, see
2574 * This is a u8 attribute that encapsulates one of the values from
2582 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
2589 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
2591 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
2597 * @NL80211_ATTR_MAX: highest attribute number currently defined
3217 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
3325 * These attribute types are used with %NL80211_STA_INFO_TXRATE
3331 * (>6.5535Gbps) only 32-bit attribute is included.
3332 * User space tools encouraged to use the 32-bit attribute and fall
3335 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
3391 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
3394 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
3421 * These attribute types are used with %NL80211_ATTR_STA_INFO
3424 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
3435 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
3450 * attribute, like NL80211_STA_INFO_TX_BITRATE.
3451 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
3473 * This is a nested attribute where each the inner attribute number is the
3479 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
3499 * @NL80211_STA_INFO_MAX: highest possible station info attribute
3558 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
3566 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
3567 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
3569 * @NL80211_TID_STATS_MAX: highest numbered attribute here
3587 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
3602 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
3643 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
3646 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
3657 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
3681 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
3682 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
3692 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
3718 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
3723 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
3728 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
3731 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
3739 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
3769 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
3791 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
3818 * channel. A channel that has the INDOOR_ONLY attribute can only be
3827 * off-channel on a channel that has the IR_CONCURRENT attribute set can be
3833 * attribute for IR is disallowed for master interfaces (IBSS, AP).
3839 * This is a nested attribute that contains the wmm limitation per AC.
3854 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
3905 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
3909 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
3971 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
3990 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
4014 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
4020 * if this attribute is in a match set of its own, then it is treated as
4025 * attribute) is if there's only a single matchset with the RSSI attribute.
4031 * RSSI-based BSS selection. The attribute value is a packed structure
4035 * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
4038 * band shall be encapsulated in attribute with type value equals to one
4041 * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
4042 * attributes will be nested within this attribute.
4044 * attribute number currently defined
4137 * assumed if the attribute is not set.
4159 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
4162 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
4178 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
4181 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
4357 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
4481 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
4503 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
4513 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
4584 * attribute.
4589 * attribute must be provided as well
4591 * attribute must be provided as well
4595 * attribute must be provided as well
4623 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
4651 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
4653 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
4658 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
4666 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
4674 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
4678 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
4690 * @NL80211_BSS_MAX: highest BSS attribute
4729 * The BSS status is a BSS attribute in scan dumps, which
4753 * the attribute for this on CONNECT commands.
4837 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
4845 * @NL80211_KEY_MAX: highest key attribute
4882 * @NL80211_TXRATE_MAX: highest TX rate attribute
4981 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
4986 * @NL80211_ATTR_CQM_MAX: highest key attribute
5054 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
5072 * the max value is advertised by the driver in this attribute on
5077 * the max value is advertised by the driver in this attribute on
5088 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
5119 * enum nl80211_packet_pattern_attr - packet pattern attribute
5120 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
5137 * @MAX_NL80211_PKTPAT: max attribute number
5191 * which are passed in an array of nested attributes, each nested attribute
5198 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
5201 * When reporting wakeup. it is a u32 attribute containing the 0-based
5217 * attribute contains the original length.
5220 * attribute if the packet was truncated somewhere.
5223 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
5227 * attribute if the packet was truncated somewhere.
5229 * "TCP connection wakeup" for more details. This is a nested attribute
5240 * is detected. This is a nested attribute that contains the
5245 * attribute is also sent in a response to
5248 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
5254 * Each element in the array is a nested attribute that contains
5255 * one optional %NL80211_ATTR_SSID attribute and one optional
5256 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
5262 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
5367 * For feature advertising, a u32 attribute holding the maximum length
5378 * u32 attribute holding the maximum length
5383 * @MAX_NL80211_WOWLAN_TCP: highest attribute number
5420 * enum nl80211_attr_coalesce_rule - coalesce rule attribute
5421 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
5428 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
5458 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
5459 * flag attribute for each interface type in this set
5461 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
5479 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
5482 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
5483 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
5487 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
5489 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
5491 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
5493 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
5497 * @MAX_NL80211_IFACE_COMB: highest attribute number
5513 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
5601 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
5632 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
5638 * @NL80211_STA_WME_MAX: highest station WME attribute
5659 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
5759 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
5836 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
5838 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
5865 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
5877 * the max channel attribute in the FILS request params IE with the
6072 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
6130 * as AP and the beaconing has already been configured. This attribute is
6285 * wiphy dumps (if requested by the application with the attribute
6371 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
6375 * scan plan (u32). The last scan plan must not specify this attribute
6378 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
6411 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
6415 * this attribute is according to &enum nl80211_band (u32).
6418 * RSSI-based BSS selection. The attribute value is a packed structure
6420 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
6494 * specified in NAN spec. This is a binary attribute.
6509 * follow up Service Discovery Frame. This is a binary attribute.
6516 * specific info. This is a binary attribute.
6517 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
6520 * attribute. It is a list of binary values.
6522 * nested attribute. It is a list of binary values.
6529 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
6561 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
6566 * attribute. Each nested attribute is a MAC address.
6568 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
6586 * match. This is a nested attribute.
6589 * that caused the match. This is a nested attribute.
6593 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
6628 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
6645 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
6648 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
6668 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
6742 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
6746 * (flag attribute)
6749 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
6766 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
6785 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
6809 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
6812 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
6817 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
6836 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
6839 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
6842 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
6848 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
6854 * @NL80211_PMSR_ATTR_MAX: highest attribute number
6874 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
6876 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
6878 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
6880 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
6882 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
6889 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
6892 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
6894 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
6896 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
6900 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
6946 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
6953 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
6966 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
7070 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
7117 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
7143 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
7161 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
7162 * attribute for each interface type that supports AKM suites specified in
7168 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
7195 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
7228 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
7248 * attribute is not present from userspace.
7293 * @NL80211_SAR_ATTR_MAX: highest sar attribute
7338 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute