Lines Matching +full:zynq +full:- +full:gpio +full:- +full:1
1 # SPDX-License-Identifier: GPL-2.0-only
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
27 On several non-X86 architectures, the frame buffer device is the
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
104 Allow generic frame-buffer functions to work on displays with 1, 2
136 Allow generic frame-buffer to provide get_fb_unmapped_area
144 non-native endianness (e.g. Little-Endian framebuffer on a
145 Big-Endian machine). Most probably you don't have such hardware,
153 bool "Support for Big- and Little-Endian framebuffers"
156 bool "Support for Big-Endian framebuffers only"
159 bool "Support for Little-Endian framebuffers only"
180 Common utility functions useful to fbdev drivers of VGA-based
214 terms of number of tiles in the x- and y-axis.
241 If you have a PCI-based system, this enables support for these
242 chips: GD-543x, GD-544x, GD-5480.
263 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
293 will be called amba-clcd.
303 hardware found in Acorn RISC PCs and other ARM-based machines. If
320 bool "SA-1100 LCD support"
326 This is a framebuffer device for the SA-1100 LCD Controller.
327 See <http://www.linux-fbdev.org/> for information on framebuffer
330 If you plan to use the LCD display with your SA-1100 system, say
445 is based on the KS-108 lcd controller and is typically a matrix
447 driver supports it for use with x86 SBCs through a 16 bit GPIO
450 GPIO IO address to be used for setting control and data.
531 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
535 tristate "VGA 16-color graphics support"
558 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
594 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
595 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
596 TURBOchannel cards, also known as PMAGD-A, -B and -C.
598 Due to hardware limitations ZLX-E2 and E3 cards are not supported
602 you manage to get it going. ;-)
638 bool "EFI-based Framebuffer Support"
691 which can be any value between 1MB and 8MB.
772 This is the frame buffer device driver for the SBUS-based Sun ZX
776 bool "Sun XVR-500 3DLABS Wildcat support"
782 This is the framebuffer device for the Sun XVR-500 and similar
789 bool "Sun XVR-2500 3DLABS Wildcat support"
795 This is the framebuffer device for the Sun XVR-2500 and similar
802 bool "Sun XVR-1000 support"
808 This is the framebuffer device for the Sun XVR-1000 and similar
846 systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
903 Because fbdev-2.6 requires that drivers must be able to
949 Because fbdev-2.6 requires that drivers must be able to
989 This driver supports the on-board graphics built in to the Intel 810
1011 monitor is recommended, but can still work with non-compliant ones.
1057 This driver supports the on-board graphics built in to the Intel
1082 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1141 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1162 interconnects Matrox optional devices, like MGA-TVO on G200 and
1167 second head of G400 or MGA-TVO on G200 or G400.
1170 i2c-matroxfb.
1179 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1180 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1188 also load i2c-matroxfb to get it to run.
1192 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1218 https://products.amd.com/en-us/GraphicCardResult.aspx
1286 Say Y here to support use of ATI's 64-bit Rage boards (or other
1363 Because fbdev-2.6 requires that drivers must be able to
1480 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1490 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1643 bool "Wondermedia WM8xxx-series frame buffer support"
1651 This is the framebuffer driver for WonderMedia WM8xxx-series
1675 tristate "PMAG-AA TURBOchannel framebuffer support"
1681 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1682 used mainly in the MIPS-based DECstation series.
1685 tristate "PMAG-BA TURBOchannel framebuffer support"
1691 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1692 used mainly in the MIPS-based DECstation series.
1695 tristate "PMAGB-B TURBOchannel framebuffer support"
1701 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1702 in the MIPS-based DECstation series. The card is currently only
1724 Olivetti M700-10 systems.
1733 Say Y here if you want to support the built-in frame buffer of
1744 Frame buffer driver for the built-in LCD controller in the Marvell
1756 Frame buffer driver for the built-in LCD controller in the Intel
1818 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1839 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1849 on the Sharp SL-6000 series
1871 Frame buffer driver for the built-in FB controller in the Samsung
1895 Frame buffer driver for the built-in LCD controller in the Samsung
1939 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1940 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1955 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1956 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2028 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2033 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2044 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2066 the vfb_enable=1 option.
2081 This driver implements the front-end of the Xen virtual
2082 frame buffer driver. It communicates with a back-end
2086 tristate "E-Ink Metronome/8track controller support"
2094 This driver implements support for the E-Ink Metronome
2095 controller. The pre-release name for this device was 8track
2096 and could also have been called by some vendors as PVI-nnnn.
2106 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2113 bool "Carmine/Coral-P(A) GDC"
2116 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2135 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2148 ep93xx-fb.
2171 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2179 This driver implements support for the E-Ink Broadsheet
2185 tristate "Microsoft Hyper-V Synthetic Video support"
2193 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2203 Say Y if you want support for a simple frame-buffer.
2207 pre-allocated frame buffer surface.