Lines Matching +full:frame +full:- +full:buffer
1 # SPDX-License-Identifier: GPL-2.0-only
13 tristate "Support for frame buffer devices"
17 The frame buffer device provides an abstraction for the graphics
18 hardware. It represents the frame buffer of some video hardware and
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
23 Frame buffer devices work identically across the different
26 server exists which uses the frame buffer device exclusively.
27 On several non-X86 architectures, the frame buffer device is the
33 You need an utility program called fbset to make full use of frame
34 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
45 (e.g. an accelerated X server) and that are not frame buffer
46 device-aware may cause unexpected results. If unsure, say N.
104 Allow generic frame-buffer functions to work on displays with 1, 2
136 Allow generic frame-buffer to provide get_fb_unmapped_area
144 non-native endianness (e.g. Little-Endian framebuffer on a
145 Big-Endian machine). Most probably you don't have such hardware,
153 bool "Support for Big- and Little-Endian framebuffers"
156 bool "Support for Big-Endian framebuffers only"
159 bool "Support for Little-Endian framebuffers only"
180 Common utility functions useful to fbdev drivers of VGA-based
214 terms of number of tiles in the x- and y-axis.
219 comment "Frame buffer hardware drivers"
241 If you have a PCI-based system, this enables support for these
242 chips: GD-543x, GD-544x, GD-5480.
256 This is the frame buffer device driver for cards based on
263 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
293 will be called amba-clcd.
302 This is the frame buffer device driver for the Acorn VIDC graphics
303 hardware found in Acorn RISC PCs and other ARM-based machines. If
320 bool "SA-1100 LCD support"
326 This is a framebuffer device for the SA-1100 LCD Controller.
327 See <http://www.linux-fbdev.org/> for information on framebuffer
330 If you plan to use the LCD display with your SA-1100 system, say
394 This is the frame buffer device driver for the builtin graphics
433 This is the frame buffer device driver for the Amiga FrameMaster
445 is based on the KS-108 lcd controller and is typically a matrix
459 This is the frame buffer device driver for the builtin graphics
463 bool "Open Firmware frame buffer device support"
481 This driver supports a frame buffer for the graphics adapter in the
492 This driver supports a frame buffer for the "platinum" graphics
503 This driver supports a frame buffer for the "valkyrie" graphics
513 This is the frame buffer device driver for the Chips & Technologies
523 This is the frame buffer device driver for the Asiliant 69030 chipset
531 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
535 tristate "VGA 16-color graphics support"
543 This is the frame buffer device driver for VGA 16 color graphic
550 tristate "HP STI frame buffer device support"
558 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
593 This is the frame buffer device driver for generic TGA and SFB+
594 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
595 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
596 TURBOchannel cards, also known as PMAGD-A, -B and -C.
598 Due to hardware limitations ZLX-E2 and E3 cards are not supported
602 you manage to get it going. ;-)
614 This is the frame buffer driver for generic VBE 2.0 compliant
632 This is the frame buffer device driver for generic VESA 2.0
638 bool "EFI-based Framebuffer Support"
645 This is the EFI frame buffer device driver. If the firmware on
675 bool "SGI Graphics Backend frame buffer support"
682 This is the frame buffer device driver for SGI Graphics Backend.
697 Say Y if you want support for SBUS or UPA based frame buffer device.
706 This is the frame buffer device driver for the BWtwo frame buffer.
715 This is the frame buffer device driver for the CGthree frame buffer.
723 This is the frame buffer device driver for the CGsix (GX, TurboGX)
724 frame buffer.
732 This is the frame buffer device driver for the Creator, Creator3D,
742 This is the frame buffer device driver for the TCX 24/8bit frame
743 buffer.
752 This is the frame buffer device driver for the CGfourteen frame
753 buffer on Desktop SPARCsystems with the SX graphics option.
762 This is the frame buffer device driver for the P9100 card
772 This is the frame buffer device driver for the SBUS-based Sun ZX
773 (leo) frame buffer cards.
776 bool "Sun XVR-500 3DLABS Wildcat support"
782 This is the framebuffer device for the Sun XVR-500 and similar
789 bool "Sun XVR-2500 3DLABS Wildcat support"
795 This is the framebuffer device for the Sun XVR-2500 and similar
802 bool "Sun XVR-1000 support"
808 This is the framebuffer device for the Sun XVR-1000 and similar
903 Because fbdev-2.6 requires that drivers must be able to
949 Because fbdev-2.6 requires that drivers must be able to
989 This driver supports the on-board graphics built in to the Intel 810
1011 monitor is recommended, but can still work with non-compliant ones.
1057 This driver supports the on-board graphics built in to the Intel
1082 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1141 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1162 interconnects Matrox optional devices, like MGA-TVO on G200 and
1167 second head of G400 or MGA-TVO on G200 or G400.
1170 i2c-matroxfb.
1179 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1180 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1188 also load i2c-matroxfb to get it to run.
1192 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1218 https://products.amd.com/en-us/GraphicCardResult.aspx
1286 Say Y here to support use of ATI's 64-bit Rage boards (or other
1363 Because fbdev-2.6 requires that drivers must be able to
1384 This is the frame buffer device driver for the SiS 300, 315, 330
1413 This is the frame buffer device driver for Graphics chips of VIA
1480 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1490 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1542 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1576 This is the frame buffer device driver for the 3DLabs Permedia3
1582 tristate "Fujitsu carmine frame buffer support"
1588 This is the frame buffer device driver for the Fujitsu Carmine chip.
1589 The driver provides two independent frame buffer devices.
1643 bool "Wondermedia WM8xxx-series frame buffer support"
1651 This is the framebuffer driver for WonderMedia WM8xxx-series
1665 tristate "HD64461 Frame Buffer support"
1671 This is the frame buffer device driver for the Hitachi HD64461 LCD
1672 frame buffer card.
1675 tristate "PMAG-AA TURBOchannel framebuffer support"
1681 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1682 used mainly in the MIPS-based DECstation series.
1685 tristate "PMAG-BA TURBOchannel framebuffer support"
1691 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1692 used mainly in the MIPS-based DECstation series.
1695 tristate "PMAGB-B TURBOchannel framebuffer support"
1701 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1702 in the MIPS-based DECstation series. The card is currently only
1717 bool "G364 frame buffer support"
1724 Olivetti M700-10 systems.
1727 bool "Motorola 68328 native frame buffer support"
1733 Say Y here if you want to support the built-in frame buffer of
1744 Frame buffer driver for the built-in LCD controller in the Marvell
1756 Frame buffer driver for the built-in LCD controller in the Intel
1812 tristate "W100 frame buffer support"
1818 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1839 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1848 Frame buffer driver for the Toshiba Mobile IO integrated as found
1849 on the Sharp SL-6000 series
1871 Frame buffer driver for the built-in FB controller in the Samsung
1895 Frame buffer driver for the built-in LCD controller in the Samsung
1918 Frame buffer driver for the CRT and LCD controllers in the Silicon
1939 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1940 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1955 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1956 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1980 Include support for the virtual frame buffer in the PS3 platform.
1983 int "PS3 default frame buffer size (in MiB)"
1987 This is the default size (in MiB) of the virtual frame buffer in
1993 tristate "Xilinx frame buffer support"
2014 tristate "Cobalt server LCD frame buffer support"
2033 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2043 This is the frame buffer device driver for the TI LCD controller
2044 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2048 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2055 This is a `virtual' frame buffer device. It operates on a chunk of
2057 board. This means you cannot see any output sent to this frame
2058 buffer device, while it does consume precious memory. The main use
2059 of this frame buffer device is testing and debugging the frame
2060 buffer subsystem. Do NOT enable it for normal systems! To protect
2071 tristate "Xen virtual frame buffer support"
2081 This driver implements the front-end of the Xen virtual
2082 frame buffer driver. It communicates with a back-end
2086 tristate "E-Ink Metronome/8track controller support"
2094 This driver implements support for the E-Ink Metronome
2095 controller. The pre-release name for this device was 8track
2096 and could also have been called by some vendors as PVI-nnnn.
2106 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2113 bool "Carmine/Coral-P(A) GDC"
2116 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2135 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2140 tristate "EP93XX frame buffer support"
2148 ep93xx-fb.
2171 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2179 This driver implements support for the E-Ink Broadsheet
2185 tristate "Microsoft Hyper-V Synthetic Video support"
2193 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2203 Say Y if you want support for a simple frame-buffer.
2207 pre-allocated frame buffer surface.
2234 Frame buffer driver for the Silicon Motion SM710, SM712, SM721