Lines Matching +full:ddc +full:- +full:i2c +full:- +full:bus
1 # SPDX-License-Identifier: GPL-2.0-only
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
27 On several non-X86 architectures, the frame buffer device is the
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
53 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
67 select I2C
104 Allow generic frame-buffer functions to work on displays with 1, 2
136 Allow generic frame-buffer to provide get_fb_unmapped_area
144 non-native endianness (e.g. Little-Endian framebuffer on a
145 Big-Endian machine). Most probably you don't have such hardware,
153 bool "Support for Big- and Little-Endian framebuffers"
156 bool "Support for Big-Endian framebuffers only"
159 bool "Support for Little-Endian framebuffers only"
180 Common utility functions useful to fbdev drivers of VGA-based
214 terms of number of tiles in the x- and y-axis.
241 If you have a PCI-based system, this enables support for these
242 chips: GD-543x, GD-544x, GD-5480.
263 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
293 will be called amba-clcd.
303 hardware found in Acorn RISC PCs and other ARM-based machines. If
320 bool "SA-1100 LCD support"
326 This is a framebuffer device for the SA-1100 LCD Controller.
327 See <http://www.linux-fbdev.org/> for information on framebuffer
330 If you plan to use the LCD display with your SA-1100 system, say
357 bool "DDC for CyberPro support"
362 Say Y here if you want DDC support for your CyberPro graphics
363 card. This is only I2C bus support, driver does not use EDID.
366 bool "CyberPro 2000/2010/5000 I2C support"
367 depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
368 depends on I2C=y || FB_CYBER2000=m
371 Enable support for the I2C video decoder interface on the
445 is based on the KS-108 lcd controller and is typically a matrix
531 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
535 tristate "VGA 16-color graphics support"
558 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
594 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
595 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
596 TURBOchannel cards, also known as PMAGD-A, -B and -C.
598 Due to hardware limitations ZLX-E2 and E3 cards are not supported
602 you manage to get it going. ;-)
638 bool "EFI-based Framebuffer Support"
772 This is the frame buffer device driver for the SBUS-based Sun ZX
776 bool "Sun XVR-500 3DLABS Wildcat support"
782 This is the framebuffer device for the Sun XVR-500 and similar
789 bool "Sun XVR-2500 3DLABS Wildcat support"
795 This is the framebuffer device for the Sun XVR-2500 and similar
802 bool "Sun XVR-1000 support"
808 This is the framebuffer device for the Sun XVR-1000 and similar
895 bool "Enable DDC Support"
899 This enables I2C support for nVidia Chipsets. This is used
903 Because fbdev-2.6 requires that drivers must be able to
941 bool "Enable DDC Support"
945 This enables I2C support for nVidia Chipsets. This is used
949 Because fbdev-2.6 requires that drivers must be able to
989 This driver supports the on-board graphics built in to the Intel 810
1011 monitor is recommended, but can still work with non-compliant ones.
1022 bool "Enable DDC Support"
1026 Add DDC/I2C support for i810fb. This will allow the driver to get
1057 This driver supports the on-board graphics built in to the Intel
1077 bool "DDC/I2C for Intel framebuffer support"
1082 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1136 "Matrox I2C support" and "G400 second head support" right below.
1141 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1156 tristate "Matrox I2C support"
1160 This drivers creates I2C buses which are needed for accessing the
1161 DDC (I2C) bus present on all Matroxes, an I2C bus which
1162 interconnects Matrox optional devices, like MGA-TVO on G200 and
1163 G400, and the secondary head DDC bus, present on G400 only.
1167 second head of G400 or MGA-TVO on G200 or G400.
1170 i2c-matroxfb.
1179 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1180 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1188 also load i2c-matroxfb to get it to run.
1192 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1218 https://products.amd.com/en-us/GraphicCardResult.aspx
1221 bool "DDC/I2C for ATI Radeon support"
1226 Say Y here if you want DDC/I2C support for your Radeon board.
1286 Say Y here to support use of ATI's 64-bit Rage boards (or other
1330 bool "DDC for S3 support"
1335 Say Y here if you want DDC support for your S3 graphics card.
1359 This enables I2C support for S3 Savage Chipsets. This is used
1363 Because fbdev-2.6 requires that drivers must be able to
1407 depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
1480 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1490 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1494 bool "Enable DDC/I2C support"
1499 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1643 bool "Wondermedia WM8xxx-series frame buffer support"
1651 This is the framebuffer driver for WonderMedia WM8xxx-series
1675 tristate "PMAG-AA TURBOchannel framebuffer support"
1681 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1682 used mainly in the MIPS-based DECstation series.
1685 tristate "PMAG-BA TURBOchannel framebuffer support"
1691 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1692 used mainly in the MIPS-based DECstation series.
1695 tristate "PMAGB-B TURBOchannel framebuffer support"
1701 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1702 in the MIPS-based DECstation series. The card is currently only
1724 Olivetti M700-10 systems.
1733 Say Y here if you want to support the built-in frame buffer of
1744 Frame buffer driver for the built-in LCD controller in the Marvell
1756 Frame buffer driver for the built-in LCD controller in the Intel
1818 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1839 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1849 on the Sharp SL-6000 series
1871 Frame buffer driver for the built-in FB controller in the Samsung
1895 Frame buffer driver for the built-in LCD controller in the Samsung
1939 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1940 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1955 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1956 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2033 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2044 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2081 This driver implements the front-end of the Xen virtual
2082 frame buffer driver. It communicates with a back-end
2086 tristate "E-Ink Metronome/8track controller support"
2094 This driver implements support for the E-Ink Metronome
2095 controller. The pre-release name for this device was 8track
2096 and could also have been called by some vendors as PVI-nnnn.
2106 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2113 bool "Carmine/Coral-P(A) GDC"
2116 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2125 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2130 bool "Support I2C bus on MB862XX GDC"
2131 depends on FB_MB862XX && I2C
2132 depends on FB_MB862XX=m || I2C=y
2135 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2136 driver to support accessing I2C devices on controller's I2C bus.
2148 ep93xx-fb.
2171 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2179 This driver implements support for the E-Ink Broadsheet
2185 tristate "Microsoft Hyper-V Synthetic Video support"
2193 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2203 Say Y if you want support for a simple frame-buffer.
2207 pre-allocated frame buffer surface.
2214 depends on FB && I2C
2225 OLED controller over I2C.