Lines Matching +full:lcd +full:- +full:rst
1 # SPDX-License-Identifier: GPL-2.0-only
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
27 On several non-X86 architectures, the frame buffer device is the
34 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
104 Allow generic frame-buffer functions to work on displays with 1, 2
136 Allow generic frame-buffer to provide get_fb_unmapped_area
144 non-native endianness (e.g. Little-Endian framebuffer on a
145 Big-Endian machine). Most probably you don't have such hardware,
153 bool "Support for Big- and Little-Endian framebuffers"
156 bool "Support for Big-Endian framebuffers only"
159 bool "Support for Little-Endian framebuffers only"
180 Common utility functions useful to fbdev drivers of VGA-based
214 terms of number of tiles in the x- and y-axis.
241 If you have a PCI-based system, this enables support for these
242 chips: GD-543x, GD-544x, GD-5480.
244 Please read the file <file:Documentation/fb/cirrusfb.rst>.
263 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
287 Colour LCD controller. ARM PrimeCells provide the building
292 here and read <file:Documentation/kbuild/modules.rst>. The module
293 will be called amba-clcd.
303 hardware found in Acorn RISC PCs and other ARM-based machines. If
307 tristate "CLPS711X LCD support"
320 bool "SA-1100 LCD support"
326 This is a framebuffer device for the SA-1100 LCD Controller.
327 See <http://www.linux-fbdev.org/> for information on framebuffer
330 If you plan to use the LCD display with your SA-1100 system, say
334 tristate "Freescale i.MX1/21/25/27 LCD support"
437 tristate "Arc Monochrome LCD board support"
444 This enables support for the Arc Monochrome LCD board. The board
445 is based on the KS-108 lcd controller and is typically a matrix
531 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
535 tristate "VGA 16-color graphics support"
558 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
594 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
595 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
596 TURBOchannel cards, also known as PMAGD-A, -B and -C.
598 Due to hardware limitations ZLX-E2 and E3 cards are not supported
602 you manage to get it going. ;-)
620 <file:Documentation/fb/uvesafb.rst> for more information.
635 read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
638 bool "EFI-based Framebuffer Support"
772 This is the frame buffer device driver for the SBUS-based Sun ZX
776 bool "Sun XVR-500 3DLABS Wildcat support"
782 This is the framebuffer device for the Sun XVR-500 and similar
789 bool "Sun XVR-2500 3DLABS Wildcat support"
795 This is the framebuffer device for the Sun XVR-2500 and similar
802 bool "Sun XVR-1000 support"
808 This is the framebuffer device for the Sun XVR-1000 and similar
833 <file:Documentation/fb/pvr2fb.rst>.
836 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
842 This enables support for the OpenCores VGA/LCD core.
844 The OpenCores VGA/LCD core is typically used together with
863 tristate "AT91 LCD Controller support"
873 This enables support for the AT91 LCD Controller.
903 Because fbdev-2.6 requires that drivers must be able to
949 Because fbdev-2.6 requires that drivers must be able to
989 This driver supports the on-board graphics built in to the Intel 810
996 <file:Documentation/fb/intel810.rst>
1011 monitor is recommended, but can still work with non-compliant ones.
1057 This driver supports the on-board graphics built in to the Intel
1066 For more information, please read <file:Documentation/fb/intelfb.rst>
1082 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1103 are described in <file:Documentation/fb/matroxfb.rst>.
1141 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1162 interconnects Matrox optional devices, like MGA-TVO on G200 and
1167 second head of G400 or MGA-TVO on G200 or G400.
1170 i2c-matroxfb.
1179 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1180 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1188 also load i2c-matroxfb to get it to run.
1192 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1218 https://products.amd.com/en-us/GraphicCardResult.aspx
1254 <file:Documentation/fb/aty128fb.rst>.
1286 Say Y here to support use of ATI's 64-bit Rage boards (or other
1292 bool "Mach64 generic LCD support"
1363 Because fbdev-2.6 requires that drivers must be able to
1480 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1490 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1516 Please read the <file:Documentation/fb/sstfb.rst> for supported
1548 For more information, read <file:Documentation/fb/tridentfb.rst>
1608 bool "Au1100 LCD Driver"
1619 bool "Au1200/Au1300 LCD Driver"
1639 This is the framebuffer driver for VIA VT8500 integrated LCD
1643 bool "Wondermedia WM8xxx-series frame buffer support"
1651 This is the framebuffer driver for WonderMedia WM8xxx-series
1652 integrated LCD controller. This driver covers the WM8505, WM8650
1671 This is the frame buffer device driver for the Hitachi HD64461 LCD
1675 tristate "PMAG-AA TURBOchannel framebuffer support"
1681 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1682 used mainly in the MIPS-based DECstation series.
1685 tristate "PMAG-BA TURBOchannel framebuffer support"
1691 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1692 used mainly in the MIPS-based DECstation series.
1695 tristate "PMAGB-B TURBOchannel framebuffer support"
1701 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1702 in the MIPS-based DECstation series. The card is currently only
1724 Olivetti M700-10 systems.
1733 Say Y here if you want to support the built-in frame buffer of
1737 tristate "PXA168/910 LCD framebuffer support"
1744 Frame buffer driver for the built-in LCD controller in the Marvell
1748 tristate "PXA LCD framebuffer support"
1756 Frame buffer driver for the built-in LCD controller in the Intel
1762 say M here and read <file:Documentation/kbuild/modules.rst>.
1771 bool "PXA Smartpanel LCD support"
1775 bool "PXA LCD command line parameters"
1779 to configure the physical properties of the LCD panel when
1780 using the PXA LCD driver.
1788 <file:Documentation/fb/pxafb.rst> describes the available parameters.
1818 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1824 say M here and read <file:Documentation/kbuild/modules.rst>.
1839 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1849 on the Sharp SL-6000 series
1854 say M here and read <file:Documentation/kbuild/modules.rst>.
1871 Frame buffer driver for the built-in FB controller in the Samsung
1889 tristate "S3C2410 LCD framebuffer support"
1895 Frame buffer driver for the built-in LCD controller in the Samsung
1901 say M here and read <file:Documentation/kbuild/modules.rst>.
1905 bool "S3C2410 lcd debug messages"
1918 Frame buffer driver for the CRT and LCD controllers in the Silicon
1924 say M here and read <file:Documentation/kbuild/modules.rst>.
1939 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1940 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1955 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1956 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2000 framebuffer. ML300 carries a 640*480 LCD display on the board,
2014 tristate "Cobalt server LCD frame buffer support"
2026 (D)STN/TFT LCD Controller.
2033 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2043 This is the frame buffer device driver for the TI LCD controller
2044 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2081 This driver implements the front-end of the Xen virtual
2082 frame buffer driver. It communicates with a back-end
2086 tristate "E-Ink Metronome/8track controller support"
2094 This driver implements support for the E-Ink Metronome
2095 controller. The pre-release name for this device was 8track
2096 and could also have been called by some vendors as PVI-nnnn.
2106 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2113 bool "Carmine/Coral-P(A) GDC"
2116 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2135 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2148 ep93xx-fb.
2166 This is a framebuffer device for the i.MX31 LCD Controller. So
2168 an LCD display with your i.MX31 system, say Y here.
2171 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2179 This driver implements support for the E-Ink Broadsheet
2185 tristate "Microsoft Hyper-V Synthetic Video support"
2193 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2203 Say Y if you want support for a simple frame-buffer.
2207 pre-allocated frame buffer surface.
2239 here and read <file:Documentation/kbuild/modules.rst>.