Lines Matching +full:generic +full:- +full:ehci
1 # SPDX-License-Identifier: GPL-2.0
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
28 module will be called xhci-hcd.
55 tristate "Generic xHCI driver for a platform device"
58 Adds an xHCI host driver for a generic platform device, which
91 tristate "xHCI support for Renesas R-Car SoCs"
96 found in Renesas R-Car ARM SoCs.
119 Enables support for XHCI, EHCI and OHCI host controllers
123 modules will be called ohci-platform.ko, ehci-brcm.ko and
124 xhci-plat-hcd.ko
130 tristate "EHCI HCD (USB 2.0) support"
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
138 EHCI controllers are packaged with "companion" host controllers (OHCI
140 will connect to EHCI if the device is high speed, otherwise they
141 connect to a companion controller. If you configure EHCI, you should
146 You may want to read <file:Documentation/usb/ehci.rst>.
149 module will be called ehci-hcd.
155 Some EHCI chips have vendor-specific extensions to integrate
160 This supports the EHCI implementation that's originally
177 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
191 bool "Use Xilinx usb host EHCI controller core"
196 Xilinx xps USB host controller core is EHCI compliant and has
197 transaction translator built-in. It can be configured to either
202 tristate "Support for Freescale on-chip EHCI USB controller"
208 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
212 Enables support for the on-chip EHCI controller on
216 tristate "EHCI support for OMAP3 and later chips"
221 Enables support for the on-chip EHCI controller on
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
229 Enables support for the on-chip EHCI controller on Marvell's
231 Armada 370. This is different from the EHCI implementation
232 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
240 Enables support for the on-chip EHCI controller on
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
249 Enable support for the on-chip EHCI controller found on
253 tristate "Support for Atmel on-chip EHCI USB controller"
257 Enables support for the on-chip EHCI controller on
272 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
275 bool "EHCI support for PPC USB controller on OF platform bus"
283 bool "EHCI support for SuperH USB controller"
286 Enables support for the on-chip EHCI controller on the SuperH.
287 If you use the PCI EHCI controller, this option is not necessary.
290 tristate "EHCI support for Samsung S5P/Exynos SoC Series"
293 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
296 tristate "EHCI support for Marvell PXA/MMP USB controller"
300 Enables support for Marvell (including PXA and MMP series) on-chip
302 only be EHCI host. OTG is controller that can switch to host mode.
303 Note that this driver will not work on Marvell's other EHCI
304 controller used by the EBU-type SoCs including Orion, Kirkwood,
306 on-chip EHCI USB controller" for those.
309 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
316 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
317 It is needed for high-speed (480Mbit/sec) USB 2.0 device
321 tristate "Generic EHCI driver for a platform device"
323 Adds an EHCI host driver for a generic platform device, which
329 bool "Octeon on-chip EHCI support (DEPRECATED)"
337 Enable support for the Octeon II SOC's on-chip EHCI
338 controller. It is needed for high-speed (480Mbit/sec)
355 module will be called oxu210hp-hcd.
367 module will be called isp116x-hcd.
379 module will be called isp1362-hcd.
386 an USB2.0 host. It is designed to meet USB2.0 EHCI specification
390 module will be called fotg210-hcd.
393 tristate "MAX3421 HCD (USB-over-SPI) support"
396 The Maxim MAX3421E chip supports standard USB 2.0-compliant
397 full-speed devices either in host or peripheral mode. This
398 driver supports the host-mode of the MAX3421E only.
401 be called max3421-hcd.
410 say Y. On most non-x86 systems, and on x86 hardware that's not using a
413 based system where you're not sure, the "lspci -v" entry will list the
414 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
417 module will be called ohci-hcd.
430 tristate "Support for ST SPEAr on-chip OHCI USB controller"
434 Enables support for the on-chip OHCI controller on
438 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
443 Enable support for the on-chip OHCI controller found on
451 Enables support for the on-chip OHCI controller on
455 tristate "Support for LPC on-chip OHCI USB controller"
461 Enables support for the on-chip OHCI controller on
465 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
469 Enables support for the on-chip OHCI controller on
473 tristate "Support for Atmel on-chip OHCI USB controller"
477 Enables support for the on-chip OHCI controller on
489 Enables support for the on-chip OHCI controller on
509 Enables support for big-endian USB controllers present on the
517 Enables support for little-endian USB controllers present on the
526 tristate "OHCI support for PCI-bus USB controllers"
531 Enables support for PCI-bus plug-in USB controller cards.
559 Enables support for the on-chip OHCI controller on the SuperH.
566 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
576 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
577 It is needed for low-speed USB 1.0 device support.
580 tristate "Generic OHCI driver for a platform device"
582 Adds an OHCI host driver for a generic platform device, which
588 bool "Octeon on-chip OHCI support (DEPRECATED)"
598 Enable support for the Octeon II SOC's on-chip OHCI
599 controller. It is needed for low-speed USB 1.0 device
619 module will be called uhci-hcd.
663 The driver consists of two modules, the "ftdi-elan" module is a
665 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
681 The SL811HS is a single-port USB controller that supports either
687 module will be called sl811-hcd.
704 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
719 module will be called r8a66597-hcd.
731 module will be called renesas-usbhs.
739 Enable support for the EHCI and OCHI host controller on an bcma bus.
741 for ehci and ohci.
751 Enable support for the EHCI and OCHI host controller on an bcma bus.
753 for ehci and ohci.
763 One such test mode is the Embedded High-speed Host Electrical Test
764 (EHSET) for EHCI host controller hardware, specifically the "Single
765 Step Set Feature" test. Typically this will be enabled for On-the-Go
766 or embedded hosts that need to undergo USB-IF compliance testing with