Lines Matching +full:chip +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
14 Enable this option to support this chip in host controller mode.
28 module will be called xhci-hcd.
56 select USB_XHCI_RCAR if ARCH_RENESAS
74 select MFD_SYSCON
83 select USB_XHCI_PLATFORM
91 tristate "xHCI support for Renesas R-Car SoCs"
96 found in Renesas R-Car ARM SoCs.
102 select FW_LOADER
115 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
116 select USB_EHCI_BRCMSTB if USB_EHCI_HCD
117 select USB_XHCI_PLATFORM if USB_XHCI_HCD
123 modules will be called ohci-platform.ko, ehci-brcm.ko and
124 xhci-plat-hcd.ko
149 module will be called ehci-hcd.
155 Some EHCI chips have vendor-specific extensions to integrate
177 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
193 select USB_EHCI_BIG_ENDIAN_DESC
194 select USB_EHCI_BIG_ENDIAN_MMIO
197 transaction translator built-in. It can be configured to either
202 tristate "Support for Freescale on-chip EHCI USB controller"
203 select USB_EHCI_ROOT_HUB_TT
208 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
212 Enables support for the on-chip EHCI controller on
221 Enables support for the on-chip EHCI controller on
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
229 Enables support for the on-chip EHCI controller on Marvell's
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
240 Enables support for the on-chip EHCI controller on
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
246 select GENERIC_PHY
247 select USB_EHCI_HCD_PLATFORM
249 Enable support for the on-chip EHCI controller found on
253 tristate "Support for Atmel on-chip EHCI USB controller"
257 Enables support for the on-chip EHCI controller on
263 select USB_CHIPIDEA
264 select USB_CHIPIDEA_HOST
265 select USB_CHIPIDEA_TEGRA
266 select USB_GADGET
286 Enables support for the on-chip EHCI controller on the SuperH.
293 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
298 select USB_EHCI_ROOT_HUB_TT
300 Enables support for Marvell (including PXA and MMP series) on-chip
304 controller used by the EBU-type SoCs including Orion, Kirkwood,
306 on-chip EHCI USB controller" for those.
311 select USB_EHCI_HCD_PLATFORM
316 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
317 It is needed for high-speed (480Mbit/sec) USB 2.0 device
329 bool "Octeon on-chip EHCI support (DEPRECATED)"
331 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
332 select USB_EHCI_HCD_PLATFORM
337 Enable support for the Octeon II SOC's on-chip EHCI
338 controller. It is needed for high-speed (480Mbit/sec)
349 option if your board has this chip. If unsure, say N.
355 module will be called oxu210hp-hcd.
362 option if your board has this chip. If unsure, say N.
367 module will be called isp116x-hcd.
374 Supports the Philips ISP1362 chip as a host controller
379 module will be called isp1362-hcd.
390 module will be called fotg210-hcd.
393 tristate "MAX3421 HCD (USB-over-SPI) support"
396 The Maxim MAX3421E chip supports standard USB 2.0-compliant
397 full-speed devices either in host or peripheral mode. This
398 driver supports the host-mode of the MAX3421E only.
401 be called max3421-hcd.
410 say Y. On most non-x86 systems, and on x86 hardware that's not using a
413 based system where you're not sure, the "lspci -v" entry will list the
414 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
417 module will be called ohci-hcd.
430 tristate "Support for ST SPEAr on-chip OHCI USB controller"
434 Enables support for the on-chip OHCI controller on
438 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
440 select GENERIC_PHY
441 select USB_OHCI_HCD_PLATFORM
443 Enable support for the on-chip OHCI controller found on
451 Enables support for the on-chip OHCI controller on
455 tristate "Support for LPC on-chip OHCI USB controller"
461 Enables support for the on-chip OHCI controller on
465 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
469 Enables support for the on-chip OHCI controller on
473 tristate "Support for Atmel on-chip OHCI USB controller"
477 Enables support for the on-chip OHCI controller on
483 select USB_OHCI_HCD_PLATFORM
489 Enables support for the on-chip OHCI controller on
496 select PHY_DA8XX_USB
506 select USB_OHCI_BIG_ENDIAN_DESC
507 select USB_OHCI_BIG_ENDIAN_MMIO
509 Enables support for big-endian USB controllers present on the
515 select USB_OHCI_LITTLE_ENDIAN
517 Enables support for little-endian USB controllers present on the
526 tristate "OHCI support for PCI-bus USB controllers"
529 select USB_OHCI_LITTLE_ENDIAN
531 Enables support for PCI-bus plug-in USB controller cards.
537 select USB_HCD_SSB
538 select USB_OHCI_HCD_PLATFORM
554 select USB_OHCI_HCD_PLATFORM
559 Enables support for the on-chip OHCI controller on the SuperH.
566 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
571 select USB_OHCI_HCD_PLATFORM
576 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
577 It is needed for low-speed USB 1.0 device support.
588 bool "Octeon on-chip OHCI support (DEPRECATED)"
591 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
592 select USB_OHCI_LITTLE_ENDIAN
593 select USB_OHCI_HCD_PLATFORM
598 Enable support for the Octeon II SOC's on-chip OHCI
599 controller. It is needed for low-speed USB 1.0 device
619 module will be called uhci-hcd.
636 select FSL_GTM
637 select QE_USB
663 The driver consists of two modules, the "ftdi-elan" module is a
664 USB client driver that interfaces to the FTDI chip within ELAN's
665 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
681 The SL811HS is a single-port USB controller that supports either
683 board has this chip, and you want to use it as a host controller.
687 module will be called sl811-hcd.
704 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
715 Enable this option if your board has this chip, and you want
719 module will be called r8a66597-hcd.
727 Enable this option if your board has this chip, and you want
731 module will be called renesas-usbhs.
736 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
737 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
748 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
749 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
763 One such test mode is the Embedded High-speed Host Electrical Test
765 Step Set Feature" test. Typically this will be enabled for On-the-Go
766 or embedded hosts that need to undergo USB-IF compliance testing with