159 #define serial_outp(up, offset, value)	serial_out(up, offset, value)  macro
199 		serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);  in __enable_rsa()
219 			serial_outp(up, UART_RSA_FRR, 0);  in enable_rsa()
242 			serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);  in disable_rsa()
402 		serial_outp(up, UART_TX, up->port.x_char);  in transmit_chars()
621 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
622 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
623 		serial_outp(up, UART_IER, 0);  in sunsu_startup()
624 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
626 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
627 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
628 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
644 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_startup()
645 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_startup()
647 		serial_outp(up, UART_FCR, 0);  in sunsu_startup()
684 	serial_outp(up, UART_LCR, UART_LCR_WLEN8);  in sunsu_startup()
699 	serial_outp(up, UART_IER, up->ier);  in sunsu_startup()
732 	serial_outp(up, UART_IER, 0);  in sunsu_shutdown()
749 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_shutdown()
752 	serial_outp(up, UART_FCR, 0);  in sunsu_shutdown()
876 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_change_speed()
877 		serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);  in sunsu_change_speed()
879 	serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */  in sunsu_change_speed()
880 	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */  in sunsu_change_speed()
881 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */  in sunsu_change_speed()
883 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
884 	serial_outp(up, UART_LCR, cval);		/* reset DLAB */  in sunsu_change_speed()
889 			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_change_speed()
891 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
1056 		serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()
1061 		serial_outp(up, UART_IER, 0x0f);  in sunsu_autoconfig()
1066 		serial_outp(up, UART_IER, scratch);  in sunsu_autoconfig()
1084 		serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);  in sunsu_autoconfig()
1086 		serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1090 	serial_outp(up, UART_LCR, 0xBF);	/* set up for StarTech test */  in sunsu_autoconfig()
1091 	serial_outp(up, UART_EFR, 0);		/* EFR is the same as FCR */  in sunsu_autoconfig()
1092 	serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1093 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1111 		serial_outp(up, UART_LCR, UART_LCR_DLAB);  in sunsu_autoconfig()
1115 			serial_outp(up, UART_LCR, 0xBF);  in sunsu_autoconfig()
1122 		serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);  in sunsu_autoconfig()
1123 		serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1133  			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1134 			serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1135 			serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1141 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1143 	serial_outp(up, UART_LCR, save_lcr);  in sunsu_autoconfig()
1146 		serial_outp(up, UART_SCR, 0xa5);  in sunsu_autoconfig()
1148 		serial_outp(up, UART_SCR, 0x5a);  in sunsu_autoconfig()
1150 		serial_outp(up, UART_SCR, scratch);  in sunsu_autoconfig()
1167 		serial_outp(up, UART_RSA_FRR, 0);  in sunsu_autoconfig()
1169 	serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1170 	serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |  in sunsu_autoconfig()
1173 	serial_outp(up, UART_FCR, 0);  in sunsu_autoconfig()
1175 	serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()