Lines Matching full:ports

160 	  properly when DMA is enabled. Make sure that ports where
244 	  provide all of these ports, depending on how the serial port
260 	  Select the number of available UART ports for the Samsung S3C
269 	  Allow selection of the S3C24XX on-board serial ports for use as
286 	  provide all of these ports, depending on how the serial port
365 	  for serial ports in newer DECstation systems.  These include the
420 	  can enable its onboard serial ports by enabling this option.
531 	int "Maximum number of uartlite serial ports"
550 	  This driver supports the Zilog8530 serial ports found on many Sparc
551 	  systems.  Say Y or M if you want to be able to these serial ports.
565 	  This driver supports the 8250 serial ports that run the keyboard and
567 	  to these serial ports.
621 	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
623 	  serial ports.
645 	  This driver supports the Zilog8530 serial ports found on SGI
646 	  systems.  Say Y or M if you want to be able to these serial ports.
660 	int "Maximum number of SCI(F) serial ports" if EXPERT
693 	  Support for the LPC32XX high speed serial ports (up to 900kbps).
704 	  ports on the LPC32XX as the console, you can do so by answering
721 	  This serial driver supports the Freescale Coldfire serial ports.
724 	int "Default baudrate for Coldfire serial ports"
729 	  ColdFire serial ports. The usual default varies from board to board,
744 	  This driver supports the Zilog z85C30 serial ports found on
746 	  Say Y or M if you want to be able to these serial ports.
756 	  both z85C30 and 8250 type ports at the same time.
762 	  access the built-in serial ports on powermacs will need to
765 	  If you enable this option, any z85c30 ports in the system will
770 	  Say N unless you need the z85c30 ports on your (Power)Mac
787 	  This driver supports the SCC and SMC serial ports on Motorola 
811 	  If you have a PIC32, this driver supports the serial ports.
813 	  Say Y or M to use PIC32 serial ports, otherwise say N. Note that
823 	  of the serial ports.
832 	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
878 	int "Maximum number of TMPTX39XX/49XX SIO ports"
914 	  of cards which provide multiple serial ports. You would need
966 	  can enable its onboard serial ports by enabling this option.
1036 	  This driver supports the QE serial ports on Freescale embedded
1052 	  Support for console on SCCNXP serial ports.
1062 	  This selects support for SC16IS7xx serial ports.
1163 	int "Maximum number of Altera UART ports"
1168 	  UART ports. The usual default varies from board to board, and
1172 	int "Default baudrate for Altera UART ports"
1177 	  Altera UART ports. The usual default varies from board to board,
1265 	int "Maximum number of AR933X serial ports"
1269 	  Set this to the number of serial ports you want the driver
1283 	  This driver support the UART ports on ARM MPS2.
1301 	int "Number of ARC UART ports"
1306 	  Set this to the number of serial ports you want the driver
1326 	int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1330 	  If multiple cards are present, the default limit of 32 ports may
1514 	int "Maximum number of CSIO/UART ports (1-8)"
1545 	int "Maximum number of LiteUART ports"
1549 	  Set this to the maximum number of serial ports you want the driver