Lines Matching +full:chip +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
24 select SERIAL_CORE
35 select SERIAL_CORE_CONSOLE
51 select SERIAL_CORE
62 select SERIAL_CORE_CONSOLE
63 select SERIAL_EARLYCON
79 select SERIAL_CORE
80 select SERIAL_CORE_CONSOLE
81 select SERIAL_EARLYCON
89 bool "Early console using RISC-V SBI"
91 select SERIAL_CORE
92 select SERIAL_CORE_CONSOLE
93 select SERIAL_EARLYCON
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
103 select SERIAL_CORE
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
118 select SERIAL_CORE_CONSOLE
129 bool "AT91 on-chip serial port support"
131 select SERIAL_CORE
132 select SERIAL_MCTRL_GPIO if GPIOLIB
133 select MFD_AT91_USART
135 This enables the driver for the on-chip UARTs of the Atmel
141 select SERIAL_CORE_CONSOLE
143 Say Y here if you wish to use an on-chip UART on a Atmel
202 select SERIAL_CORE
204 This enables the driver for the on-chip UARTs of the Amlogic
210 select SERIAL_CORE_CONSOLE
211 select SERIAL_EARLYCON
221 select SERIAL_CORE
222 select SERIAL_MCTRL_GPIO if GPIOLIB
224 This enables the driver for the on-chip UARTs of the Cirrus
230 select SERIAL_CORE_CONSOLE
240 select SERIAL_CORE
242 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
260 Select the number of available UART ports for the Samsung S3C
266 select SERIAL_CORE_CONSOLE
267 select SERIAL_EARLYCON
269 Allow selection of the S3C24XX on-board serial ports for use as
282 select SERIAL_CORE
284 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
294 select SERIAL_CORE
296 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
303 select SERIAL_CORE_CONSOLE
316 select SERIAL_CORE
318 MAX3100 chip support
323 select SERIAL_CORE
324 select REGMAP_SPI if SPI_MASTER
329 that can be controlled through I2C or high-speed SPI.
336 select SERIAL_CORE
339 DZ11-family serial controllers for DECstations and VAXstations,
345 select SERIAL_CORE_CONSOLE
361 select SERIAL_CORE
375 select SERIAL_CORE_CONSOLE
391 select SERIAL_CORE
400 select SERIAL_CORE_CONSOLE
415 select SERIAL_CORE
416 select SERIAL_8250_PXA if SERIAL_8250=y
417 select SERIAL_PXA_NON8250 if !SERIAL_8250=y
432 select SERIAL_CORE_CONSOLE
433 select SERIAL_8250_CONSOLE if SERIAL_8250=y
451 select SERIAL_CORE
452 select SERIAL_MCTRL_GPIO if GPIOLIB
462 select SERIAL_CORE_CONSOLE
477 select SERIAL_CORE
478 select RATIONAL
479 select SERIAL_MCTRL_GPIO if GPIOLIB
487 select SERIAL_CORE_CONSOLE
502 select SERIAL_CORE
503 select SERIAL_EARLYCON
504 select SERIAL_CORE_CONSOLE
513 select SERIAL_CORE
523 select SERIAL_CORE_CONSOLE
524 select SERIAL_EARLYCON
542 select SERIAL_CORE
543 select SERIAL_CORE_CONSOLE
580 select SERIAL_CORE
599 select SERIAL_CORE_CONSOLE
643 select SERIAL_CORE
651 select SERIAL_CORE_CONSOLE
656 select SERIAL_CORE
657 select SERIAL_MCTRL_GPIO if GPIOLIB
672 select SERIAL_CORE_CONSOLE
678 select SERIAL_CORE_CONSOLE
679 select SERIAL_EARLYCON
691 select SERIAL_CORE
701 select SERIAL_CORE_CONSOLE
719 select SERIAL_CORE
735 select SERIAL_CORE_CONSOLE
742 select SERIAL_CORE
752 The pmac_zilog driver for the z85C30 chip on many powermacs
760 the pmac_zilog and 8250 drivers to co-exist, but may cause
762 access the built-in serial ports on powermacs will need to
767 unable to use the 8250 module for PCMCIA or other 16C550-style
776 select SERIAL_CORE_CONSOLE
785 select SERIAL_CORE
793 select SERIAL_CORE_CONSOLE
809 select SERIAL_CORE
820 select SERIAL_CORE_CONSOLE
830 select SERIAL_CORE
840 select SERIAL_CORE_CONSOLE
842 Select this options if you'd like to use one of the PSC serial port
850 Select the MPC52xx console baud rate.
858 select SERIAL_CORE
859 select FW_LOADER
871 select SERIAL_CORE
885 select SERIAL_CORE_CONSOLE
894 select SERIAL_CORE
903 select SERIAL_CORE_CONSOLE
911 select SERIAL_CORE
916 box, for instance in order to become a dial-in server. This driver
925 tristate "MSM on-chip serial port support"
927 select SERIAL_CORE
932 select SERIAL_CORE_CONSOLE
933 select SERIAL_EARLYCON
936 tristate "QCOM on-chip GENI based serial port support"
939 select SERIAL_CORE
944 select SERIAL_CORE_CONSOLE
945 select SERIAL_EARLYCON
951 bool "VIA VT8500 on-chip serial port support"
953 select SERIAL_CORE
958 select SERIAL_CORE_CONSOLE
963 select SERIAL_CORE
969 with the omap-serial driver. DMA support can be enabled from platform
975 select SERIAL_CORE_CONSOLE
977 Select this option if you would like to use omap serial port as
990 select SERIAL_CORE
992 Select this option if you are building a kernel for a device that
999 select SERIAL_CORE_CONSOLE
1000 select SERIAL_EARLYCON
1002 Select this option if you would like to use a SiFive UART as the
1015 select SERIAL_CORE
1018 To compile this driver as a module, select M here. The
1024 select SERIAL_CORE_CONSOLE
1025 select SERIAL_EARLYCON
1027 Select this option if you would like to use a Lantiq UART as the
1033 select SERIAL_CORE
1034 select FW_LOADER
1041 select SERIAL_CORE
1050 select SERIAL_CORE_CONSOLE
1059 select SERIAL_CORE
1064 SC16IS760 and SC16IS762. Select supported buses using options below.
1070 select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1071 select REGMAP_I2C if I2C
1077 You must select at least one bus for the driver to be built.
1083 select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1084 select REGMAP_SPI if SPI_MASTER
1089 You must select at least one bus for the driver to be built.
1093 select SERIAL_CORE
1100 select SERIAL_CORE
1109 BCM7xxx (STB) - DOCSIS console
1114 select SERIAL_CORE_CONSOLE
1115 select SERIAL_EARLYCON
1123 select SERIAL_CORE
1130 select SERIAL_CORE_CONSOLE
1136 select SERIAL_CORE
1143 select SERIAL_CORE_CONSOLE
1144 select SERIAL_EARLYCON
1151 select SERIAL_CORE_CONSOLE
1158 select SERIAL_CORE
1183 select SERIAL_CORE_CONSOLE
1184 select SERIAL_EARLYCON
1191 select SERIAL_CORE
1199 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1201 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1207 select SERIAL_CORE_CONSOLE
1216 select SERIAL_CORE
1217 select SERIAL_MCTRL_GPIO if GPIOLIB
1225 select SERIAL_CORE_CONSOLE
1232 select SERIAL_CORE
1240 select SERIAL_CORE_CONSOLE
1241 select SERIAL_EARLYCON
1248 select SERIAL_CORE
1249 select SERIAL_MCTRL_GPIO if GPIOLIB
1252 built-in UART of the SoC, say Y to this option.
1260 select SERIAL_CORE_CONSOLE
1262 Enable a built-in UART port of the AR933X to be the system console.
1275 select SERIAL_CORE_CONSOLE
1276 select SERIAL_EARLYCON
1281 select SERIAL_CORE
1287 select SERIAL_CORE
1289 Driver for on-chip UART for ARC(Synopsys) for the legacy
1295 select SERIAL_CORE_CONSOLE
1296 select SERIAL_EARLYCON
1312 select SERIAL_CORE
1336 select SERIAL_CORE
1338 Support for the on-chip lpuart on some Freescale SOCs.
1343 select SERIAL_CORE_CONSOLE
1344 select SERIAL_EARLYCON
1352 select SERIAL_CORE
1354 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1359 select SERIAL_CORE_CONSOLE
1360 select SERIAL_EARLYCON
1368 select SERIAL_CORE
1370 Support for the on-chip USART on Conexant Digicolor SoCs.
1375 select SERIAL_CORE_CONSOLE
1382 select SERIAL_CORE
1385 This driver is for the on-chip Asynchronous Serial Controller on
1395 select SERIAL_CORE_CONSOLE
1399 select SERIAL_CORE
1402 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1410 select SERIAL_CORE
1418 select SERIAL_CORE_CONSOLE
1419 select SERIAL_EARLYCON
1428 select SERIAL_CORE
1430 select SERIAL_MCTRL_GPIO if GPIOLIB
1432 This driver is for the on-chip Serial Controller on
1442 select SERIAL_CORE_CONSOLE
1447 select SERIAL_CORE
1450 based on the Armada-3700 SoC and wish to use the on-board serial
1458 select SERIAL_CORE_CONSOLE
1459 select SERIAL_EARLYCON
1462 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1470 select SERIAL_CORE
1473 Say 'Y' here if you wish to use the on-board serial port.
1479 select SERIAL_CORE_CONSOLE
1480 select SERIAL_EARLYCON
1489 select SERIAL_CORE
1492 Say 'Y' here if you wish to use the on-board serial port.
1498 select SERIAL_CORE_CONSOLE
1499 select SERIAL_EARLYCON
1509 select SERIAL_CORE
1514 int "Maximum number of CSIO/UART ports (1-8)"
1523 select SERIAL_CORE_CONSOLE
1524 select SERIAL_EARLYCON
1536 select SERIAL_CORE
1538 This driver is for the FPGA-based LiteUART serial controller from LiteX
1555 select SERIAL_CORE_CONSOLE
1556 select SERIAL_EARLYCON
1558 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial