Lines Matching +full:slave +full:- +full:mode
1 # SPDX-License-Identifier: GPL-2.0-only
13 dynamic device discovery; some are even write-only or read-only.
17 chips, analog to digital (and d-to-a) converters, and more.
36 # MASTER side ... talking to discrete SPI slave chips including microcontrollers
44 If your system has an master-capable SPI controller (which
46 controller and the protocol drivers for the SPI slave chips
56 by providing a high-level interface to send memory-like commands.
80 to a SPI slave to Avalon bridge in a Intel MAX BMC.
125 This enables support for the Quad SPI controller in master mode.
127 supports spi-mem interface.
154 is for the regular SPI controller. Slave mode operation is not also
197 this code to manage the per-word or per-transfer accesses to the
227 Flash over 1/2/4-bit wide bus. Enable this option if you have a
235 This enables dedicated general purpose SPI/Microwire1-compatible
236 master mode interface (SSI1) for CLPS711X-based CPUs.
243 mode.
246 tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
250 SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
268 tristate "Memory-mapped io interface driver for DW SPI core"
272 tristate "Baikal-T1 SPI driver for DW SPI core"
277 Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
280 part of the Baikal-T1 System Boot Controller has got a very
282 chip-select and Tx/Rx FIFO with just 8 words depth available.
283 The later one is normally connected to an external SPI-nor flash
287 bool "Directly mapped Baikal-T1 Boot SPI flash support"
291 Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
296 time-critical tasks (like the SPI memory operations implemented
302 tristate "Diolan DLN-2 USB SPI adapter"
309 will be called spi-dln2.
316 mode.
322 The external bus unit (EBU) found on the FALC-ON SoC has SPI
338 This enables Freescale i.MX LPSPI controllers in master mode.
345 This enables support for the Quad SPI controller in master mode.
349 supports the high-level SPI memory interface.
359 will be called hisi-kunpeng-spi.
373 This enables support for the Flex SPI controller in master mode.
374 Up to four slave devices can be connected on two buses with two
377 supports the high-level SPI memory interface.
380 tristate "GPIO-based bitbanging SPI Master"
384 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
410 tristate "J-Core SPI Master"
413 This enables support for the SPI master controller in the J-Core
426 tristate "ICP DAS LP-8841 SPI Controller for RTC"
430 DS-1302 real time clock.
433 LP-8x4x industrial computer.
436 tristate "Freescale MPC52xx SPI (non-PSC) controller support"
440 mode.
447 Controller in master SPI mode.
454 Controller in SPI master mode.
470 This enables using the Freescale SPI controllers in master mode.
471 MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
472 MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
474 master mode.
482 mode. VF610, LS1021A and ColdFire platforms uses the controller.
488 This enables using the Freescale eSPI controllers in master mode.
497 This enables master mode support for the SPICC (SPI communication
505 This enables master mode support for the SPIFC (SPI flash
539 in master mode.
541 supports spi-mem interface.
548 Peripheral SPI controller in master mode.
555 mode. This controller is found on Intel (former Lantiq) SoCs like
593 it only supports single write mode.
657 Rockchip SPI controller support DMA transport and PIO mode.
671 the driver automatically falls back to PIO mode.
680 tristate "Renesas RPC-IF SPI driver"
683 SPI driver for Renesas R-Car Gen3 or RZ/G2 RPC-IF.
701 Qualcomm Universal Peripheral (QUP) core is an AHB slave that
703 for serial peripheral interface (SPI) mini-core. SPI in master
704 mode supports up to 50MHz, up to four chip selects, programmable
715 master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
716 yes to this option, support will be included for the built-in SPI
720 will be called spi-geni-qcom.
730 bool "S3C24XX driver with FIQ pseudo-DMA"
735 DMA by using the fast-interrupt request framework, This allows
736 the driver to get DMA-like performance when there are either
785 tristate "MediaTek SPI slave device"
789 This selects the MediaTek(R) SPI slave device driver.
790 If you want to use MediaTek(R) SPI slave interface,
792 SPI slave drivers for Mediatek MT27XX series ARM SoCs.
815 PIO mode.
823 This enables support for the Quad SPI controller in master mode.
825 supports spi-mem interface.
828 tristate "STMicroelectronics SPI SSC-based driver"
853 that use the de-facto standard SPI protocol.
855 It also supports the new dual-bit and quad-bit SPI protocol.
936 tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
939 Support for the SPI-I2C bridge found on the Analog Devices
940 AD-FMCOMMS1-EBZ board.
974 16 bit words in SPI mode 0, automatically asserting CS on transfer
982 in master mode.
1010 select one or more specific mux-controller drivers.
1019 tristate "User mode SPI device driver support"
1021 This supports user mode SPI protocol drivers.
1051 # SLAVE side ... listening to other SPI masters
1055 bool "SPI slave protocol handlers"
1057 If your system has a slave-capable SPI controller, you can enable
1058 slave protocol handlers.
1063 tristate "SPI slave handler reporting boot up time"
1065 SPI slave handler responding with the time of reception of the last
1069 tristate "SPI slave handler controlling system state"
1071 SPI slave handler to allow remote control of system reboot, power