Lines Matching full:if
19 Generic RTC class support. If you say yes here, you will
23 if RTC_CLASS
29 If you say yes here, the system time (wall clock) will be set using
48 If the clock you specify here is not battery backed, it may still
57 If you say yes here, the system time (wall clock) will be stored
59 minutes if userspace reports synchronized NTP status.
64 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
79 tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
85 If unsure, say N.
102 Say yes here if you want to use your RTCs using sysfs interfaces,
105 If unsure, say Y.
112 Say yes here if you want to use your system clock RTC through
115 If there is no RTC for the system clock, then the first RTC(rtc0)
118 If unsure, say Y.
124 Say yes here if you want to use your RTCs using the /dev
133 If unsure, say Y.
139 Provides an emulation for RTC_UIE if the underlying rtc chip
145 only if you know that you really need it.
150 If you say yes here you get support for the
154 You want this driver only if you are doing development
158 This driver can also be built as a module. If so, the module
163 if I2C
169 If you say yes here you get support for RTC function in Marvell
172 This driver can also be built as a module. If so, the module
179 If you say yes here you get support for RTC function in Marvell
182 This driver can also be built as a module. If so, the module
189 If you say yes here you get support for the Abracon
192 This driver can also be built as a module. If so, the module
199 If you say yes here you get support for the Abracon
202 This driver can also be built as a module. If so, the module
207 select WATCHDOG_CORE if WATCHDOG
209 If you say yes here you get support for Abracon AB080X and AB180X
213 This driver can also be built as a module. If so, the module
220 If you say yes here you get support for the real-time clock found
223 This driver can also be built as a module. If so, the module
231 If you say yes here you get support for the wake-timer found on
234 This driver can also be built as a module. If so, the module will
241 If you say yes here you get support for the RTC of ams AS3722 PMIC
244 This driver can also be built as a module. If so, the module
250 select WATCHDOG_CORE if WATCHDOG
252 If you say yes here you get support for various compatible RTC
264 This driver can also be built as a module. If so, the module
275 Setting this option will add proper support for the century bit but if
284 If you say yes here you get support for Dallas Semiconductor
285 DS1374 real-time clock chips. If an interrupt is associated
288 This driver can also be built as a module. If so, the module
296 If you say Y here you will get support for the
303 If you say yes here you get support for the
306 This driver can also be built as a module. If so, the module
317 This driver can also be built as a module. If so, the module
329 If you say yes here you will get support for the
332 This driver can also be built as a module. If so, the module
340 If you say yes here you will get support for the
343 This driver can also be built as a module. If so, the module
350 If you say yes here you will get support for the
353 This driver can also be built as a module. If so, the module
360 If you say yes here you will get support for the
363 This driver can also be built as a module. If so, the module
370 If you say yes here you will get support for the
373 This driver can also be built as a module. If so, the module
380 If you say yes here you will get support for the
383 This driver can also be built as a module. If so, the module
390 If you say yes here you will get support for the
393 This driver can also be built as a module. If so, the module
399 If you say yes here you get support for the
402 This driver can also be built as a module. If so, the module
408 If you say yes here you get support for the
411 This driver can also be built as a module. If so, the module
417 If you say yes here you get support for the
420 This driver can also be built as a module. If so, the module
427 If you say yes here you get support for the
430 This driver can also be built as a module. If so, the module
436 If you say yes here you get support for the
439 This driver can also be built as a module. If so, the module
445 If you say yes here you get support for the NXP PCF8523 RTC
448 This driver can also be built as a module. If so, the module
455 If you say yes here you get support for the PCF85063 RTC chip
457 This driver can also be built as a module. If so, the module
464 If you say yes here you get support for the PCF85363 RTC chip.
466 This driver can also be built as a module. If so, the module
475 If you say yes here you get support for the
479 This driver can also be built as a module. If so, the module
485 If you say yes here you get support for the Philips PCF8583
491 This driver can also be built as a module. If so, the module
497 If you say Y here you will get support for the ST M41T60
502 This driver can also be built as a module. If so, the module
509 If you say Y here you will get support for the
516 If you say Y here you will get support for the RTC
519 This driver can also be built as a module. If so, the module
525 If you say Y here you will get support for the TI
528 This driver can also be built as a module. If so, the module
541 If you say yes here you get support for the RTC on the
551 If you say yes here you get support for the RTC on the
554 This driver can also be built as a module. If so, the module
561 If you say yes here you get support for the RTC of TI PALMA series PMIC
564 This driver can also be built as a module. If so, the module
579 If you say yes here you get support for the RTC on the
582 This driver can also be built as a module. If so, the module
597 If you say yes here you get support for the RTC on the
600 This driver can also be built as a module. If so, the module
607 If you say yes here you get support for the RTC on the
610 This driver can also be built as a module. If so, the module
617 If you say yes here you will get support for the Seiko
620 This driver can also be built as a module. If so the module
626 If you say Y here you will get support for the
631 This driver can also be built as a module. If so the module
638 If you say yes here you get support for the Epson RX8010SJ RTC
641 This driver can also be built as a module. If so, the module
648 If you say yes here you will get support for the Epson RX-8571/
651 This driver can also be built as a module. If so the module
657 If you say yes here you get support for the Epson
660 This driver can also be built as a module. If so, the module
666 If you say yes here you get support for the EM
669 This driver can also be built as a module. If so, the module
676 If you say yes here you get support for the Micro Crystal
679 This driver can also be built as a module. If so, the module
686 If you say yes here you get support for the Micro Crystal
689 This driver can also be built as a module. If so, the module
695 If you say yes here you get support for the Micro Crystal RV8803 and
698 This driver can also be built as a module. If so, the module
707 If you say yes here you will get support for the
710 This driver can also be built as a module. If so, the module
717 If you say yes here you get support for the ZXW Shenzhen whwave
720 This driver can also be built as a module. If so, the module
727 if SPI_MASTER
732 If you say yes here you will get support for the
735 This driver can also be built as a module. If so, the module
741 If you say yes here you will get support for the
744 This driver can also be built as a module. If so, the module
751 If you say yes here you get support for the Dallas DS1302 RTC chips.
753 This driver can also be built as a module. If so, the module
763 This driver can also be built as a module. If so, the module
770 If you say yes here you get support for the
774 This driver can also be built as a module. If so, the module
781 If you say yes here you get support for the
787 This driver can also be built as a module. If so, the module
793 If you say yes here you get support for the
799 This driver can also be built as a module. If so, the module
805 If you say yes here you will get support for the
811 This driver can also be built as a module. If so, the module
817 If you say yes here you will get support for the
820 This driver can also be built as a module. If so, the module
826 If you say yes here you will get support for the Epson RX-4581.
828 This driver can also be built as a module. If so the module
834 If you say yes here you get support for the
837 This driver can also be built as a module. If so, the module
843 If you say yes here you will get support for the
846 This driver can also be built as a module. If so, the module
853 If you say yes here you get support for the NXP PCF2123
856 This driver can also be built as a module. If so, the module
862 If you say yes here you will get support for the Microchip MCP795.
864 This driver can also be built as a module. If so the module
875 default m if I2C=m
876 default y if I2C=y
877 default y if SPI_MASTER=y
884 select REGMAP_I2C if I2C
885 select REGMAP_SPI if SPI_MASTER
887 If you say yes here you get support for Dallas Semiconductor
888 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
891 This driver can also be built as a module. If so, the module
899 Say Y here if you want to expose temperature sensor data on
905 select REGMAP_I2C if I2C
906 select REGMAP_SPI if SPI_MASTER
907 select WATCHDOG_CORE if WATCHDOG
909 If you say yes here you get support for the NXP PCF2127/29 RTC
917 This driver can also be built as a module. If so, the module
923 select REGMAP_I2C if I2C
924 select REGMAP_SPI if SPI_MASTER
926 If you say yes here you get support for the Micro Crystal
929 This driver can also be built as a module. If so, the module
938 Say Y here if you want to expose temperature sensor data on
944 select REGMAP_SPI if SPI_MASTER
945 select REGMAP_I2C if I2C
947 If you say yes here you will get support for the Epson RX-6110.
949 This driver can also be built as a module. If so the module
961 default y if X86
972 you can safely enable this driver if you don't know whether
975 This driver can also be built as a module. If so, the module
985 system, specifically MC146818 compatibles. If in doubt, say Y.
991 If you say yes here you get support for the Dallas DS1216 RTC chips.
997 If you say yes here you get support for the Dallas DS1286 RTC chips.
1003 If you say yes here you get support for the
1006 This driver can also be built as a module. If so, the module
1013 If you say yes here you get support for the
1016 This driver can also be built as a module. If so, the module
1023 If you say yes here you get support for the Dallas/Maxim DS1685
1028 This driver can also be built as a module. If so, the module
1091 If you say yes here you get support for the
1094 This driver can also be built as a module. If so, the module
1100 If you say yes here you get support for the
1103 This driver can also be built as a module. If so, the module
1117 If you say yes here you will get support for the
1120 This driver can also be built as a module. If so, the module
1127 If you say yes here you will get support for the RTC subsystem
1130 This driver can also be built as a module. If so, the module
1137 If you say yes here you will get support for the EFI
1140 This driver can also be built as a module. If so, the module
1147 If you say yes here you get support for the
1150 This driver can also be built as a module. If so, the module
1157 If you say Y here you will get support for the
1160 This driver can also be built as a module. If so, the module
1167 If you say Y here you will get support for the
1170 This driver can also be built as a module, if so, the module
1177 If you say Y here you will get support for the
1183 This driver can also be built as a module, if so, the module
1190 If you say yes here you get support for the Oki MSM6242
1193 This driver can also be built as a module. If so, the module
1200 If you say Y here you will get support for the TI
1203 This driver can also be built as a module. If so, the module
1210 If you say yes here you get support for the Ricoh RP5C01
1214 This driver can also be built as a module. If so, the module
1220 If you say yes here you will get support for the
1223 This driver can also be built as a module. If so, the module
1230 If you say yes here you will get support for the RTC subsystem
1233 This driver can also be built as a module. If so, the module
1240 If you say yes here you will get support for the RTC subsystem
1243 This driver can also be built as a module. If so, the module
1250 If you say Y here you will get support for the RTC subsystem
1254 This driver can also be built as a module. If so, the module
1262 If you say Y here you will get support for the RTC found on
1269 If you say yes here you get support for the RTC subsystem of the
1286 If you say yes here you get support for the PowerNV platform RTC
1289 This driver can also be built as a module. If so, the module
1296 If you say yes here you get support for the RTC controller found on
1303 If you say yes here you will get support for the
1306 This driver can also be built as a module. If so, the module
1313 Say yes here if you want to support the RTC functionality of the
1323 If you say yes here you get support for the RTC on the
1326 This driver can also be built as a module. If so, the module
1333 If you say yes here you get support for the RTC on the
1336 This driver can also be built as a module. If so, the module
1343 If you say yes here you get support for the RTC on Conexant
1346 This driver can also be built as a module. If so, the module
1356 This driver can also be built as a module, if so, the module
1369 This driver can also be built as a module, if so, the module
1380 This driver can also be built as a module, if so, the module
1386 default m if ARCH_MESON
1388 If you say yes here you will get support for the
1391 This driver can also be built as a module. If so, the module
1404 This driver can also be built as a module, if so, module
1410 This will include RTC support for Samsung SoCs. If
1427 This driver can also be build as a module. If so, the module
1434 If you say yes here you get support for the
1437 This driver can also be built as a module. If so, the module
1444 If you say Y here you will get access to the real time clock
1464 If you say Y here you will get access to the real time clock
1474 If you say Y here you will get access to ARM AMBA
1484 If you say Y here you will get access to ARM AMBA
1521 This driver can also be built as a module. If so, the module
1528 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1537 RTC abstraction. If you do not know what you are doing, you should
1545 If you say Y here you will get access to the real time clock
1556 If you say Y here you will get access to the real time clock
1564 If you say Y here you will get support for the Hypervisor
1573 If you say Y here you will get support for the RTC found in
1580 If you say Y here you will get support for the RTC found on
1587 If you say Y here you will get support for the RTC found on
1594 If you say yes here you will get support for the in-chip RTC
1598 This driver can also be built as a module. If so, the module
1606 If you say yes here you will get support for the in-chip RTC
1609 This driver can also be built as a module. If so, the module
1616 If you say Y here you will get access to Cadence RTC IP
1627 If you say Y here you will get support for the
1630 This driver can also be built as a module. If so, the module
1637 If you say yes here you will get support for the RTC on PS3.
1639 This driver can also be built as a module. If so, the module
1647 If you say yes here you will get support for the onboard
1650 This driver can also be built as a module. If so, the module
1657 If you say Y here you will get support for the RTC found on
1671 If you say yes here you will get support for the
1674 This driver can also be built as a module. If so, the module
1682 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1685 This driver can also be built as a module. If so, the module
1696 If you have one of the devices above enable this driver to use
1697 the hardware RTC. This driver can also be built as a module. If
1706 This driver can also be built as a module. If so, the module
1713 If you say yes here you get support for the
1723 If you say yes here you get support for the
1726 This drive can also be built as a module. If so, the module
1736 This driver can also be built as a module. If so, the module
1745 If you say yes here you get support for the Freescale MXC
1748 This driver can also be built as a module, if so, the module
1757 If you say yes here you get support for the Freescale MXC
1760 This driver can also be built as a module, if so, the module
1770 If you say yes here you get support for the Freescale SNVS
1773 This driver can also be built as a module, if so, the module
1781 If you say yes here you get support for the NXP i.MX System
1799 If you say yes here you get support for the MOXA ART
1802 This driver can also be built as a module. If so, the module
1812 This drive can also be built as a module. If so, the module
1823 If you want to use MediaTek(R) RTC interface, select Y or M here.
1832 This drive can also be built as a module. If so, the module
1840 If you say yes here you get support for the APM X-Gene SoC real time
1843 This driver can also be built as a module, if so, the module
1851 If you say yes here you get support for the PIC32 RTC module.
1853 This driver can also be built as a module. If so, the module
1861 If you say yes here you get support for the EPSON TOYOCOM
1864 This driver can also be built as a module. If so, the module
1872 If you say yes here you get support for the STM32 On-Chip
1875 This driver can also be built as a module, if so, the module
1890 If you say yes here, you get support for the RTD1295 SoC
1898 If you say yes here you get support for the ASPEED BMC SoC real time
1901 This driver can also be built as a module, if so, the module
1915 If this driver is compiled as a module, it will be named
1932 If you say yes here, you get read/write support for the Real Time
1935 This can also be built as a module. If so, the module will