Lines Matching +full:uniphier +full:- +full:i2c
1 # SPDX-License-Identifier: GPL-2.0-only
38 managed regulators and simple non-configurable regulators.
61 depends on I2C
65 They provide two I2C-controlled DC/DC step-down converters with
74 the voltage is programmed via I2C interface.
85 tristate "Active-semi act8865 voltage regulator"
86 depends on I2C
90 This driver controls a active-semi act8865 voltage output
91 regulator via I2C bus.
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
104 depends on I2C
110 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
114 Say y here to support Freescale i.MX on-chip ANATOP LDOs
126 bool "ST-Ericsson AB8500 Power Regulators"
129 This driver supports the regulators found on the ST-Ericsson mixed
182 tristate "X-POWERS AXP20X PMIC Regulators"
206 will be called bd71815-regulator.
218 will be called bd71828-regulator.
230 will be called bd718x7-regulator.
241 will be called bd9571mwv-regulator.
251 will be called bd9576-regulator.
268 will be called cros-ec-regulator.
282 This driver supports the voltage regulators of DA9052-BC and
283 DA9053-AA/Bx PMIC.
293 will be called da9055-regulator.
303 will be called da9062-regulator.
313 will be called da9063-regulator.
317 depends on I2C && OF
321 DA9121 is a single channel dual-phase buck converter controlled
322 through an I2C interface.
324 DA9121 Single-channel dual-phase 10A buck converter
325 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
326 DA9217 Single-channel dual-phase 6A buck converter
327 DA9122 Dual-channel single-phase 5A buck converter
328 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
329 DA9220 Dual-channel single-phase 3A buck converter
330 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
333 will be called da9121-regulator.
337 depends on I2C
341 The DA9210 is a multi-phase synchronous step down
342 converter 12A DC-DC Buck controlled through an I2C
347 depends on I2C
352 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
353 step down converter 12A or 16A DC-DC Buck controlled through an I2C
360 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
369 depends on I2C
373 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
376 programmed through an I2C interface.
380 depends on I2C && (OF || COMPILE_TEST)
385 (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
395 and the platform has to provide a mapping of GPIO-states
404 Hi6421 is a multi-function device which, on regulator part, provides
414 Hi6421v530 is a multi-function device which, on regulator part,
437 depends on I2C
444 depends on I2C
466 depends on I2C
473 depends on I2C
480 depends on I2C
490 provides two step-down converters and two general-purpose LDO
496 depends on I2C
500 chip contains six step-down DC/DC converters which can support
508 provides four step-down converters. It supports software based
518 tristate "LTC3589 8-output voltage regulator"
519 depends on I2C
522 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
523 8-output regulators controlled via I2C.
526 tristate "LTC3676 8-output voltage regulator"
527 depends on I2C
531 8-output regulators controlled via I2C.
537 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
543 depends on I2C
546 regulator via I2C bus. The provided regulator is suitable
554 via I2C bus. The provided regulator is suitable for Tegra
555 chip to control Step-Down DC-DC and LDOs. Say Y here to
568 depends on I2C
572 I2C bus.
576 depends on I2C
579 regulator via I2C bus.
583 depends on I2C
587 regulator via I2C bus.
594 via I2C bus. The provided regulator is suitable for Tegra
595 chip to control Step-Down DC-DC and LDOs.
605 depends on I2C
608 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
613 depends on I2C
617 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
627 via I2C bus. The provided regulator is suitable for S5PC110,
628 S5PV210, and Exynos-4 chips to control VCC_CORE and
636 via I2C bus. The provided regulator is suitable for S3C6410
644 via I2C bus. The provided regulator is suitable for
645 Exynos-4 chips to control VARM and VINT voltages.
651 This driver controls a Maxim 77693/77843 regulators via I2C bus.
654 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
661 via I2C bus. The provided regulator is suitable for
667 depends on I2C
670 This driver controls a Maxim 77826 regulator via I2C bus.
696 depends on I2C && OF
702 suspend-to-ram/standby transition.
706 depends on I2C && OF
716 depends on I2C
727 depends on I2C && (OF || COMPILE_TEST)
734 depends on I2C && OF
744 depends on I2C
795 2-channel buck with Thermal Shutdown and Overload Protection
796 6-channel High PSRR and Low Dropout LDO.
849 depends on I2C
871 depends on I2C && OF
879 "pf8x00-regulator".
883 depends on I2C && OF
891 depends on I2C
899 depends on I2C
906 depends on I2C
929 "qcom_rpm-regulator".
951 "qcom_smd-regulator".
962 "qcom_spmi-regulator".
975 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
977 depends on I2C
980 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
992 outputs which can be controlled by i2c communication.
1002 outputs which can be controlled by i2c communication.
1016 depends on I2C
1042 depends on I2C
1053 depends on I2C
1062 depends on I2C
1066 The RTQ2134 is a multi-phase, programmable power management IC that
1067 integrate with four high efficient, synchronous step-down converter
1073 depends on I2C
1082 depends on I2C
1087 buck-boost. This device is suitable for automotive TFT-LCD panel.
1094 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1101 output regulator via I2C bus. The chip is comprised of high efficient
1102 Buck converters including Dual-Phase Buck converter, Buck-Boost
1110 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1125 via I2C bus. SKY81452 has one voltage linear regulator can be
1129 will be called sky81452-regulator.
1133 depends on I2C
1149 will be called stm32-booster.
1161 will be called stm32-vrefbuf.
1183 tristate "TI Adaptive Body Bias on-chip LDO"
1186 Select this option to support Texas Instruments' on-chip Adaptive Body
1208 depends on I2C && (OF || COMPILE_TEST)
1215 depends on I2C && (OF || COMPILE_TEST)
1222 depends on I2C && (OF || COMPILE_TEST)
1229 depends on I2C
1233 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1235 The voltage output can be configure through I2C interface or PWM
1249 depends on I2C
1254 high-frequency synchronous step down dc-dc converter optimized
1255 for battery-powered portable applications.
1259 depends on I2C
1263 three step-down converters and two general-purpose LDO voltage regulators.
1264 It supports TI's software based Class-2 SmartReflex implementation.
1268 depends on I2C
1271 three step-down converters and two general-purpose LDO voltage regulators.
1272 It supports TI's software based Class-2 SmartReflex implementation.
1290 depends on I2C && GPIOLIB
1293 This driver supports TPS65132 single inductor - dual output
1301 provides three step-down converters and four general-purpose LDO
1310 provides six step-down converters and one general-purpose LDO
1319 provides three step-down converters and two general-purpose LDO
1347 Path and Battery Charger. It has 5 configurable step-down
1359 tristate "UniPhier regulator driver"
1365 Support for regulators implemented on Socionext UniPhier SoCs.