421 	 * other type of charging.  in ab8500_power_supply_changed()
454 		 * USB charging and no psy has been created, but we still  in ab8500_charger_set_usb_connected()
703 	 * This means that charging current from USB source  in ab8500_charger_max_usb_curr()
771 		dev_err(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
783 			dev_dbg(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
801 		dev_err(di->dev, "USB Type invalid - try charging anyway\n");  in ab8500_charger_max_usb_curr()
1075  * to the register. Returns -1 if charging is not allowed
1132  * charging is started. Instead we need to implement
1329  * Power ON/OFF charging LED indication
1337 		/* Power ON charging LED indicator, set LED current to 5mA */  in ab8500_charger_led_en()
1354 		/* Power off charging LED indicator */  in ab8500_charger_led_en()
1368  * ab8500_charger_ac_en() - enable or disable ac charging
1371  * @vset:	charging voltage
1372  * @iset:	charging current
1374  * Enable/Disable AC/Mains charging and turns on/off the charging led
1395 		/* Enable AC charging */  in ab8500_charger_ac_en()
1401 		 * This will turn off charging for a short while.  in ab8500_charger_ac_en()
1425 				"charging not started\n");  in ab8500_charger_ac_en()
1429 		/* ChVoltLevel: maximum battery charging voltage */  in ab8500_charger_ac_en()
1465 		/* Power on charging LED indication */  in ab8500_charger_ac_en()
1472 		/* Disable AC charging */  in ab8500_charger_ac_en()
1491 			 * We can't turn off charging completely  in ab8500_charger_ac_en()
1493 			 * If we do, charging will not start again.  in ab8500_charger_ac_en()
1537 		dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);  in ab8500_charger_ac_en()
1545  * ab8500_charger_usb_en() - enable usb charging
1548  * @vset:	charging voltage
1551  * Enable/Disable USB charging and turns on/off the charging led respectively.
1574 		 * This will turn off charging for a short while.  in ab8500_charger_usb_en()
1590 		/* Enable USB charging */  in ab8500_charger_usb_en()
1599 				"charging not started\n");  in ab8500_charger_usb_en()
1627 		/* If success power on charging LED indication */  in ab8500_charger_usb_en()
1654 		/* Disable USB charging */  in ab8500_charger_usb_en()
1655 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1692 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1727  * ab8500_charger_usb_check_enable() - enable usb charging
1729  * @vset:	charging voltage
1755 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_usb_check_enable()
1776  * ab8500_charger_ac_check_enable() - enable usb charging
1778  * @vset:	charging voltage
1804 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_ac_check_enable()
1941  * charger when charging with at some specific levels. This issue is only valid
2285 	 * to start the charging process. but by jumping  in ab8500_charger_usb_link_status_work()
2428 		 * of 1sec for enabling charging  in ab8500_charger_usb_state_changed_work()
2434 		 * USB is configured, enable charging with the charging  in ab8500_charger_usb_state_changed_work()
2827 	 * needs to be restarted for charging to start again  in ab8500_charger_chwdexp_handler()
2895  * online:     ac/mains charging is in progress or not
2962  * online:     usb charging is in progress or not
3036  * charging of the backup battery
3146 		dev_err(di->dev, "failed to setup backup battery charging\n");  in ab8500_charger_init_hw_registers()
3150 	/* Enable backup battery charging */  in ab8500_charger_init_hw_registers()
3362 	/* Disable AC charging */  in ab8500_charger_unbind()
3365 	/* Disable USB charging */  in ab8500_charger_unbind()
3456 	 * interrupts during charging  in ab8500_charger_probe()
3512 	 * The AB8505 only supports USB charging. If we are not the  in ab8500_charger_probe()