Lines Matching +full:6 +full:e +full:- +full:7
19 #include <linux/pinctrl/pinconf-generic.h>
22 #include "pinctrl-utils.h"
35 #define LPC18XX_SCU_PIN_EZI BIT(6)
36 #define LPC18XX_SCU_PIN_ZIF BIT(7)
46 #define LPC18XX_SCU_I2C0_ZIF BIT(7)
66 TYPE_ND, /* Normal-drive */
67 TYPE_HD, /* High-drive */
68 TYPE_HS, /* High-speed */
204 #define LPC18XX_ANALOG_PIN BIT(7)
246 LPC_P(1,6, GPIO, CTIN, R, EMC, R, R, SGPIO, SDMMC, 0, ND);
247 LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND);
267 LPC_P(2,6, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND);
268 LPC_P(2,7, GPIO, CTOUT, UART3, EMC, R, R, TIMER3, R, 0, ND);
281 LPC_P(3,6, GPIO, SPI, SSP0, SPIFI, R, SSP0_ALT, R, R, 0, ND);
282 LPC_P(3,7, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND);
290 LPC_P(4,6, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND);
291 LPC_P(4,7, LCD, CLKIN, R, R, R, R, I2S1,I2S0_TX_SCK, 0, ND);
301 LPC_P(5,6, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
302 LPC_P(5,7, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
303 LPC_P(6,0, R, I2S0_RX_MCLK,R, R, I2S0_RX_SCK, R, R, R, 0, ND);
304 LPC_P(6,1, GPIO, EMC, UART0, I2S0_RX_WS, R, TIMER2, R, R, 0, ND);
305 LPC_P(6,2, GPIO, EMC, UART0, I2S0_RX_SDA, R, TIMER2, R, R, 0, ND);
306 LPC_P(6,3, GPIO, USB0, SGPIO, EMC, R, TIMER2, R, R, 0, ND);
307 LPC_P(6,4, GPIO, CTIN, UART0, EMC, R, R, R, R, 0, ND);
308 LPC_P(6,5, GPIO, CTOUT, UART0, EMC, R, R, R, R, 0, ND);
309 LPC_P(6,6, GPIO, EMC, SGPIO, USB0, R, TIMER2, R, R, 0, ND);
310 LPC_P(6,7, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
311 LPC_P(6,8, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
312 LPC_P(6,9, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
313 LPC_P(6,10, GPIO, MCTRL, R, EMC, R, R, R, R, 0, ND);
314 LPC_P(6,11, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
315 LPC_P(6,12, GPIO, CTOUT, R, EMC, R, R, R, R, 0, ND);
316 LPC_P(7,0, GPIO, CTOUT, R, LCD, R, R, R, SGPIO, 0, ND);
317 LPC_P(7,1, GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
318 LPC_P(7,2, GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
319 LPC_P(7,3, GPIO, CTIN, R, LCD,LCD_ALT, R, R, R, 0, ND);
320 LPC_P(7,4, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|4, ND);
321 LPC_P(7,5, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|3, ND);
322 LPC_P(7,6, GPIO, CTOUT, R, LCD, R, TRACE, R, R, 0, ND);
323 LPC_P(7,7, GPIO, CTOUT, R, LCD, R, TRACE, ENET, SGPIO, ADC1|6, ND);
330 LPC_P(8,6, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
331 LPC_P(8,7, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
339 LPC_P(9,6, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART0, 0, ND);
351 LPC_P(b,6, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, ADC0|6, ND);
358 LPC_P(c,6, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
359 LPC_P(c,7, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
373 LPC_P(d,6, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
374 LPC_P(d,7, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND);
384 LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
385 LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
386 LPC_P(e,2,ADCTRIG, CAN0, R, EMC, GPIO, R, R, R, 0, ND);
387 LPC_P(e,3, R, CAN0,ADCTRIG, EMC, GPIO, R, R, R, 0, ND);
388 LPC_P(e,4, R, NMI, R, EMC, GPIO, R, R, R, 0, ND);
389 LPC_P(e,5, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
390 LPC_P(e,6, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
391 LPC_P(e,7, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
392 LPC_P(e,8, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
393 LPC_P(e,9, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
394 LPC_P(e,10, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
395 LPC_P(e,11, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
396 LPC_P(e,12, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
397 LPC_P(e,13, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
398 LPC_P(e,14, R, R, R, EMC, GPIO, R, R, R, 0, ND);
399 LPC_P(e,15, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
406 LPC_P(f,6, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|3, ND);
407 LPC_P(f,7, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|7, ND);
456 LPC18XX_PIN_P(1,6),
457 LPC18XX_PIN_P(1,7),
477 LPC18XX_PIN_P(2,6),
478 LPC18XX_PIN_P(2,7),
491 LPC18XX_PIN_P(3,6),
492 LPC18XX_PIN_P(3,7),
500 LPC18XX_PIN_P(4,6),
501 LPC18XX_PIN_P(4,7),
511 LPC18XX_PIN_P(5,6),
512 LPC18XX_PIN_P(5,7),
513 LPC18XX_PIN_P(6,0),
514 LPC18XX_PIN_P(6,1),
515 LPC18XX_PIN_P(6,2),
516 LPC18XX_PIN_P(6,3),
517 LPC18XX_PIN_P(6,4),
518 LPC18XX_PIN_P(6,5),
519 LPC18XX_PIN_P(6,6),
520 LPC18XX_PIN_P(6,7),
521 LPC18XX_PIN_P(6,8),
522 LPC18XX_PIN_P(6,9),
523 LPC18XX_PIN_P(6,10),
524 LPC18XX_PIN_P(6,11),
525 LPC18XX_PIN_P(6,12),
526 LPC18XX_PIN_P(7,0),
527 LPC18XX_PIN_P(7,1),
528 LPC18XX_PIN_P(7,2),
529 LPC18XX_PIN_P(7,3),
530 LPC18XX_PIN_P(7,4),
531 LPC18XX_PIN_P(7,5),
532 LPC18XX_PIN_P(7,6),
533 LPC18XX_PIN_P(7,7),
540 LPC18XX_PIN_P(8,6),
541 LPC18XX_PIN_P(8,7),
549 LPC18XX_PIN_P(9,6),
561 LPC18XX_PIN_P(b,6),
568 LPC18XX_PIN_P(c,6),
569 LPC18XX_PIN_P(c,7),
583 LPC18XX_PIN_P(d,6),
584 LPC18XX_PIN_P(d,7),
594 LPC18XX_PIN_P(e,0),
595 LPC18XX_PIN_P(e,1),
596 LPC18XX_PIN_P(e,2),
597 LPC18XX_PIN_P(e,3),
598 LPC18XX_PIN_P(e,4),
599 LPC18XX_PIN_P(e,5),
600 LPC18XX_PIN_P(e,6),
601 LPC18XX_PIN_P(e,7),
602 LPC18XX_PIN_P(e,8),
603 LPC18XX_PIN_P(e,9),
604 LPC18XX_PIN_P(e,10),
605 LPC18XX_PIN_P(e,11),
606 LPC18XX_PIN_P(e,12),
607 LPC18XX_PIN_P(e,13),
608 LPC18XX_PIN_P(e,14),
609 LPC18XX_PIN_P(e,15),
616 LPC18XX_PIN_P(f,6),
617 LPC18XX_PIN_P(f,7),
637 {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
658 return -EINVAL; in lpc18xx_pconf_get_usb1()
665 return -EINVAL; in lpc18xx_pconf_get_usb1()
669 return -ENOTSUPP; in lpc18xx_pconf_get_usb1()
690 return -EINVAL; in lpc18xx_pconf_get_i2c0()
709 return -EINVAL; in lpc18xx_pconf_get_i2c0()
715 return -ENOTSUPP; in lpc18xx_pconf_get_i2c0()
727 return -EINVAL; in lpc18xx_pin_to_gpio()
729 return pin - range->pin_base + range->base; in lpc18xx_pin_to_gpio()
746 return -EINVAL; in lpc18xx_get_pintsel()
768 return -ENOTSUPP; in lpc18xx_pconf_get_gpio_pin_int()
774 * PINTSEL registers. *arg indicates which interrupt number (0-7). in lpc18xx_pconf_get_gpio_pin_int()
777 ret = lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL0, val, arg); in lpc18xx_pconf_get_gpio_pin_int()
781 return lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL1, val, arg); in lpc18xx_pconf_get_gpio_pin_int()
793 return -EINVAL; in lpc18xx_pconf_get_pin()
798 return -EINVAL; in lpc18xx_pconf_get_pin()
807 return -EINVAL; in lpc18xx_pconf_get_pin()
814 return -EINVAL; in lpc18xx_pconf_get_pin()
818 if (pin_cap->type == TYPE_HD) in lpc18xx_pconf_get_pin()
819 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
829 return -EINVAL; in lpc18xx_pconf_get_pin()
835 if (pin_cap->type != TYPE_HD) in lpc18xx_pconf_get_pin()
836 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
854 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
883 return -EINVAL; in lpc18xx_pconf_get()
885 reg = readl(scu->base + pin_cap->offset); in lpc18xx_pconf_get()
887 if (pin_cap->type == TYPE_I2C0) in lpc18xx_pconf_get()
889 else if (pin_cap->type == TYPE_USB1) in lpc18xx_pconf_get()
923 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_usb1()
924 return -ENOTSUPP; in lpc18xx_pconf_set_usb1()
963 return -ENOTSUPP; in lpc18xx_pconf_set_i2c0()
974 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_i2c0()
975 return -ENOTSUPP; in lpc18xx_pconf_set_i2c0()
989 return -EINVAL; in lpc18xx_pconf_set_gpio_pin_int()
993 return -ENOTSUPP; in lpc18xx_pconf_set_gpio_pin_int()
999 reg_val = readl(scu->base + reg_offset); in lpc18xx_pconf_set_gpio_pin_int()
1002 writel(reg_val, scu->base + reg_offset); in lpc18xx_pconf_set_gpio_pin_int()
1033 if (pin_cap->type == TYPE_HD) { in lpc18xx_pconf_set_pin()
1034 dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n"); in lpc18xx_pconf_set_pin()
1035 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1052 if (pin_cap->type != TYPE_HD) { in lpc18xx_pconf_set_pin()
1053 dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n"); in lpc18xx_pconf_set_pin()
1054 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1059 case 20: param_val -= 5; in lpc18xx_pconf_set_pin()
1061 case 14: param_val -= 5; in lpc18xx_pconf_set_pin()
1063 case 8: param_val -= 3; in lpc18xx_pconf_set_pin()
1065 case 4: param_val -= 4; in lpc18xx_pconf_set_pin()
1068 dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val); in lpc18xx_pconf_set_pin()
1069 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1078 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_pin()
1079 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1098 return -EINVAL; in lpc18xx_pconf_set()
1100 reg = readl(scu->base + pin_cap->offset); in lpc18xx_pconf_set()
1106 if (pin_cap->type == TYPE_I2C0) in lpc18xx_pconf_set()
1108 else if (pin_cap->type == TYPE_USB1) in lpc18xx_pconf_set()
1117 writel(reg, scu->base + pin_cap->offset); in lpc18xx_pconf_set()
1146 *groups = scu->func[function].groups; in lpc18xx_pmx_get_func_groups()
1147 *num_groups = scu->func[function].ngroups; in lpc18xx_pmx_get_func_groups()
1161 if (pin->type == TYPE_USB1) { in lpc18xx_pmx_set()
1168 if (pin->type == TYPE_I2C0) { in lpc18xx_pmx_set()
1175 if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) { in lpc18xx_pmx_set()
1178 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); in lpc18xx_pmx_set()
1180 if (LPC18XX_ANALOG_ADC(pin->analog) == 0) in lpc18xx_pmx_set()
1185 reg = readl(scu->base + offset); in lpc18xx_pmx_set()
1186 reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK; in lpc18xx_pmx_set()
1187 writel(reg, scu->base + offset); in lpc18xx_pmx_set()
1192 if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) { in lpc18xx_pmx_set()
1193 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); in lpc18xx_pmx_set()
1195 reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2); in lpc18xx_pmx_set()
1197 writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2); in lpc18xx_pmx_set()
1203 if (function == pin->functions[func]) in lpc18xx_pmx_set()
1210 reg = readl(scu->base + pin->offset); in lpc18xx_pmx_set()
1212 writel(reg | func, scu->base + pin->offset); in lpc18xx_pmx_set()
1216 dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name, in lpc18xx_pmx_set()
1218 return -EINVAL; in lpc18xx_pmx_set()
1259 .name = "lpc18xx/43xx-scu",
1278 if (function == FUNC_DAC && p->analog == DAC) in lpc18xx_valid_pin_function()
1281 if (function == FUNC_ADC && p->analog) in lpc18xx_valid_pin_function()
1284 if (function == FUNC_I2C0 && p->type == TYPE_I2C0) in lpc18xx_valid_pin_function()
1287 if (function == FUNC_USB1 && p->type == TYPE_USB1) in lpc18xx_valid_pin_function()
1291 if (function == p->functions[i]) in lpc18xx_valid_pin_function()
1310 scu->func[func].ngroups = ngroups; in lpc18xx_create_group_func_map()
1311 scu->func[func].groups = devm_kcalloc(dev, in lpc18xx_create_group_func_map()
1314 if (!scu->func[func].groups) in lpc18xx_create_group_func_map()
1315 return -ENOMEM; in lpc18xx_create_group_func_map()
1318 scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name; in lpc18xx_create_group_func_map()
1329 scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL); in lpc18xx_scu_probe()
1331 return -ENOMEM; in lpc18xx_scu_probe()
1333 scu->base = devm_platform_ioremap_resource(pdev, 0); in lpc18xx_scu_probe()
1334 if (IS_ERR(scu->base)) in lpc18xx_scu_probe()
1335 return PTR_ERR(scu->base); in lpc18xx_scu_probe()
1337 scu->clk = devm_clk_get(&pdev->dev, NULL); in lpc18xx_scu_probe()
1338 if (IS_ERR(scu->clk)) { in lpc18xx_scu_probe()
1339 dev_err(&pdev->dev, "Input clock not found.\n"); in lpc18xx_scu_probe()
1340 return PTR_ERR(scu->clk); in lpc18xx_scu_probe()
1343 ret = lpc18xx_create_group_func_map(&pdev->dev, scu); in lpc18xx_scu_probe()
1345 dev_err(&pdev->dev, "Unable to create group func map.\n"); in lpc18xx_scu_probe()
1349 ret = clk_prepare_enable(scu->clk); in lpc18xx_scu_probe()
1351 dev_err(&pdev->dev, "Unable to enable clock.\n"); in lpc18xx_scu_probe()
1357 scu->pctl = devm_pinctrl_register(&pdev->dev, &lpc18xx_scu_desc, scu); in lpc18xx_scu_probe()
1358 if (IS_ERR(scu->pctl)) { in lpc18xx_scu_probe()
1359 dev_err(&pdev->dev, "Could not register pinctrl driver\n"); in lpc18xx_scu_probe()
1360 clk_disable_unprepare(scu->clk); in lpc18xx_scu_probe()
1361 return PTR_ERR(scu->pctl); in lpc18xx_scu_probe()
1368 { .compatible = "nxp,lpc1850-scu" },
1375 .name = "lpc18xx-scu",