611  * register for fiber link.
637  *   enabled, then we write the BMCR. Adapted for fiber link in
655 	/* Setup fiber advertisement */  in marvell_config_aneg_fiber()
693 	/* Then the fiber link */  in m88e1111_config_aneg()
699 		/* Do not touch the fiber advertisement if we're in copper->sgmii mode.  in m88e1111_config_aneg()
729 	/* Do not touch the fiber page if we're in copper->sgmii mode */  in m88e1510_config_aneg()
733 	/* Then the fiber link */  in m88e1510_config_aneg()
1504  * @lpa: value of the MII_LPA register for fiber link
1520 				       int fiber, int status)  in marvell_read_status_page_an()  argument
1549 	if (!fiber) {  in marvell_read_status_page_an()
1560 		/* The fiber link is only 1000M capable */  in marvell_read_status_page_an()
1591 	int fiber;  in marvell_read_status_page()  local
1599 	 * and the PHY status register for fiber link status.  in marvell_read_status_page()
1610 		fiber = 1;  in marvell_read_status_page()
1612 		fiber = 0;  in marvell_read_status_page()
1619 	phydev->port = fiber ? PORT_FIBRE : PORT_TP;  in marvell_read_status_page()
1622 		err = marvell_read_status_page_an(phydev, fiber, status);  in marvell_read_status_page()
1631  * Some Marvell's phys have two modes: fiber and copper.
1634  *   First, check the fiber link and status.
1635  *   If the fiber link is down, check the copper link and status which
1642 	/* Check the fiber mode first */  in marvell_read_status()
1654 		/* If the fiber link is up, it is the selected and  in marvell_read_status()
1656 		 * fiber page. Please to be careful about that, avoid  in marvell_read_status()
1658 		 * could break the behaviour for some fiber phy like  in marvell_read_status()
1664 		/* If fiber link is down, check and save copper mode state */  in marvell_read_status()
1679  * Some Marvell's phys have two modes: fiber and copper.
1686 	/* Suspend the fiber mode first */  in marvell_suspend()
1714  * Some Marvell's phys have two modes: fiber and copper.
1721 	/* Resume the fiber mode first */  in marvell_resume()