1 // SPDX-License-Identifier: GPL-2.0-only
30  * ethernet-phy-idAAAA.BBBB */
66 	device_set_node(&mdiodev->dev, fwnode);  in of_mdiobus_register_device()
76 	dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",  in of_mdiobus_register_device()
88 	{ .compatible = "brcm,40nm-ephy" },
98 	{ .compatible = "moxa,moxart-rtl8201cp", },
104  * o Compatible string of "ethernet-phy-idX.X"
105  * o Compatible string of "ethernet-phy-ieee802.3-c45"
106  * o Compatible string of "ethernet-phy-ieee802.3-c22"
117 	if (of_get_phy_id(child, &phy_id) != -EINVAL)  in of_mdiobus_child_is_phy()
120 	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))  in of_mdiobus_child_is_phy()
123 	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22"))  in of_mdiobus_child_is_phy()
141  * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
159 		return -ENODEV;  in of_mdiobus_register()
163 	mdio->phy_mask = ~0;  in of_mdiobus_register()
165 	device_set_node(&mdio->dev, of_fwnode_handle(np));  in of_mdiobus_register()
168 	mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;  in of_mdiobus_register()
169 	of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);  in of_mdiobus_register()
170 	mdio->reset_post_delay_us = 0;  in of_mdiobus_register()
171 	of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);  in of_mdiobus_register()
180 		addr = of_mdio_parse_addr(&mdio->dev, child);  in of_mdiobus_register()
191 		if (rc == -ENODEV)  in of_mdiobus_register()
192 			dev_err(&mdio->dev,  in of_mdiobus_register()
214 			dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",  in of_mdiobus_register()
218 				/* -ENODEV is the return code that PHYLIB has  in of_mdiobus_register()
225 				if (rc != -ENODEV)  in of_mdiobus_register()
240  * of_mdio_find_device - Given a device tree node, find the mdio_device
254  * of_phy_find_device - Give a PHY node, find the phy_device
267  * of_phy_connect - Connect to the phy described in the device tree
289 	phy->dev_flags |= flags;  in of_phy_connect()
294 	put_device(&phy->mdio.dev);  in of_phy_connect()
302  * - Get phy node and connect to the phy described in the device tree
326 			netdev_err(dev, "broken fixed-link specification\n");  in of_phy_get_and_connect()
331 		phy_np = of_parse_phandle(np, "phy-handle", 0);  in of_phy_get_and_connect()
347  * - the old DT binding, where 'fixed-link' was a property with 5
349  * - the new DT binding, where 'fixed-link' is a sub-node of the
359 	dn = of_get_child_by_name(np, "fixed-link");  in of_phy_is_fixed_link()
370 	if (of_get_property(np, "fixed-link", &len) &&  in of_phy_is_fixed_link()
386 	    strcmp(managed, "in-band-status") == 0) {  in of_phy_register_fixed_link()
392 	fixed_link_node = of_get_child_by_name(np, "fixed-link");  in of_phy_register_fixed_link()
396 						      "full-duplex");  in of_phy_register_fixed_link()
400 			return -EINVAL;  in of_phy_register_fixed_link()
404 							  "asym-pause");  in of_phy_register_fixed_link()
411 	if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,  in of_phy_register_fixed_link()
416 		status.pause  = fixed_link_prop[3];  in of_phy_register_fixed_link()
421 	return -ENODEV;  in of_phy_register_fixed_link()
438 	put_device(&phydev->mdio.dev);	/* of_phy_find_device() */  in of_phy_deregister_fixed_link()